Question about Pioneer 6CD CHANGER

2 Answers

Pioneer 10 disc changer magazine stuck

May have put magazine in wrong, now will not eject mag and display shows no mag--please help

Posted by on

  • 1 more comment 
  • ACANNON Nov 26, 2007

    will get that info this p.m. & respond then--thanks

  • ACANNON Nov 29, 2007

    hey,, it's not a pioneer. it's a SONY CDX530RFF 10 DISC. sorry, it's in the wifes car

  • ACANNON Dec 02, 2007

    got the mag out, actually was inserted correctly, problem appears no power to trunk unit it's self. any idea on in line fuse? have taken main radio fuse out and re-inserted for a possible reset?

×

Ad

2 Answers

Ok well... i haven't been able to troubleshoot the problem much but on most multi-disc players there should be a manual eject button or switch that will release the magazine from the holding unit. Besides that i would refer you to a professional who actually works on Sony multi-disc players

Posted on Dec 02, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I would like to be of assistance but i need to know the which pioneer 10 disc changer it is. send me the information and i may be able to help. thanks

Posted on Nov 26, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power to the disc changer, how do I manually eject the magazine


There is a manual eject slot on the side of the CD changer. You will need a small flat head screwdriver or a pry tool to insert into the slot.

Oct 11, 2012 | Kenwood KDC-C715 10 Disc CD Changer

1 Answer

I have a CDX-FM65 Pioneer 6 disc player. The


I have a pioneer universal multi-cd system cdx fm65, the remote indicator unit display will not come on when you masn the handheld remote what do I need to do?

Jun 28, 2009 | Pioneer CDX-FM657 6-Disc CD Changer

3 Answers

Eurovox 'Maestro Series' 10 stacker displaying 'E-99'


CD ERROR DISPLAYS
CD Changers
E01:
The disc magazine is not inserted in the cd changer
E02:
No disc is inserted in the disc magazine
E04:
The disc is dirty, or the disc is inserted into the disc magazine
upside down
E99 RESET PROCEDURE:
Remove CD magazine by pressing eject button on changer.
Remove all discs from magazine and re-load empty magazine into
changer. Using the Radio RESET CD system by pressing and
holding the “ON”/”POWER” button for about ten seconds, or in
earlier models the “EJECT/6” button.


FM/RF Remote Controls
E99 RESET PROCEDURE FOR REMOTES:
Remove disc magazine from changer by pressing eject button.
Remove all discs from magazine and re-load empty magazine into
changer. Press RESET button on interface unit
WAIT:
The temperature is exceeding more than 55c(130f) and the cd
changer cannot be operated. When the cd changer cools off, this
wait disappears. When the RESET button on the interface unit is
pressed, this WAIT appears for a few seconds.


IF THESE ERROR CODES STILL KEEP APPEARING
CONTACT YOUR DEALER.

Jun 21, 2009 | iLO CA3000V CD Player

2 Answers

Eurovox 'Maestro Series' 10 stacker displaying 'E-99'


CD ERROR DISPLAYS
CD Changers
E01:
The disc magazine is not inserted in the cd changer
E02:
No disc is inserted in the disc magazine
E04:
The disc is dirty, or the disc is inserted into the disc magazine
upside down
E99 RESET PROCEDURE:
Remove CD magazine by pressing eject button on changer.
Remove all discs from magazine and re-load empty magazine into
changer. Using the Radio RESET CD system by pressing and
holding the “ON”/”POWER” button for about ten seconds, or in
earlier models the “EJECT/6” button.


FM/RF Remote Controls
E99 RESET PROCEDURE FOR REMOTES:
Remove disc magazine from changer by pressing eject button.
Remove all discs from magazine and re-load empty magazine into
changer. Press RESET button on interface unit
WAIT:
The temperature is exceeding more than 55c(130f) and the cd
changer cannot be operated. When the cd changer cools off, this
wait disappears. When the RESET button on the interface unit is
pressed, this WAIT appears for a few seconds


IF THESE ERROR CODES STILL KEEP APPEARING
CONTACT YOUR DEALER.

Jun 14, 2009 | iLO CA3000V CD Player

2 Answers

Jammed CD & Magazine in an Alpine CHA-S634


Mine jammed after I dropped it, trying to swap it into a new car :-)
Same problem, however. Three of the six CD trays had wandered into the righthand mechanism (which selects and plays one cd at a time). Nothing else at all, most fortunately, was broken.
I removed the cover (3 screws on each side), and the small black faceplate that holds the eject button. The main faceplate came off too, needless to say; no screws, just tabs.
You have to remove the side brackets also, and the angle-adjust spring loaded pins on both sides need to be slid out. Then the body of the cd changer rotates out of its cover.
Now, you can see down into the mechanism. A CD was still stuck in the reader, along with several shifted trays. I could simply remove the CD, and with a small screwdriver, shifted the trays back over so that I could then successfully eject it. I removed and realigned the trays, which had been jammed, and it worked once more! Reassembled and reinstalled ;-)

Apr 26, 2009 | Alpine CHAS-634 6-Disc CD Changer

1 Answer

How do I reset CD changer?


I disconnected the car bettery for a minute, reconnected and was then able to eject the magazine.

Sep 29, 2008 | Sony CDX-T67 6-Disc CD Changer

3 Answers

No ejection


hi does it make any noise or clicking?

you may have a cd dislodged or mag dammaged.

Mark

Sep 05, 2008 | Clarion DC625 6-Disc CD Changer

3 Answers

Factory installed Alpine 6 CD Changer- cd magazine (for 1998 BMW 528i E39)


Hi , seen lots of these.
whats happend is the Tray that the disc sits in has jammed halfway in.
in most cases giving the mag a swift tap (hard tap) with the haddle of a screw driver , while pushing the eject button normally is just enough to dislodge the mag.

otherwise its a repair job.

were do you live Alison?

Regards


Mark
www.blueice-electronics.co.uk

Jun 23, 2008 | Car Audio & Video

2 Answers

Clarion dc 625 cartridge


yas long as all the trays are still loaded in the cart/mag then you should be able to release it with a long flat peice of stiff card. push it under the cart/mag and kinda wiggle it this should trip the catch and pop out your mag


Mark

Blue ICE

Dec 11, 2007 | Clarion DC625 6-Disc CD Changer

1 Answer

Inoperable CD changer


Hi the alpine/merc/bmw cd changer all seam to suffer with the same problem, they say no disc, or no mag try firmly hitting the mag with the handle of a screw driver. the loadinga arm, tends to get stuck. you could try using some grease on the arms, and levers, white spray gease works best. but dont forget to cover the laser beforehand, you dont want grease on it :) Mark www.carradiospares.co.uk

Mar 27, 2007 | USA Spec MERC99 6-Disc CD Changer

Not finding what you are looking for?
Pioneer 6CD CHANGER Logo

427 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Audio & Video Experts

The Knight
The Knight

Level 3 Expert

75157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

78257 Answers

Are you a Pioneer Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...