Question about Shure Head Set Microphone Microphone

1 Answer

About my mic.

Recently i purchased frontech microphone for my computer
i am able to hear the voice but i am not able to record my voice in the computer.
please helpme in sloving this problem

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 682 Answers
Re: about my mic.

Go to control panel:-1-select-sound and audio devices.2-select audio3-in sound recording select your audio driver{creative or other}3-press volume you will see capture screen raise mic volume above and select check box under it.===enjoy recording.

Posted on Feb 26, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have an rode nt1-a microphone, roland quad capture interface, but when im gonna record or put the input level i hear wind, i turn down the input volume all the way down, i still see the input signal

The Rode NT1A mic is a condenser mic and therefore it REQUIRES that "phantom" power be supplied by the mixer or amplifier. You will get only electronic "noise" if the mic is not receiving this power. Look up Phantom power to understand it. Essentially DC power is sent up the mic cable between the signal lines and the shield of the cable and is used by the electronics in the mic to amplify the signal from the condenser element.

Feb 25, 2013 | Rode NT1A Professional Microphone

2 Answers

Dose'nt work

email the company you purchased from

Jun 18, 2011 | Shure SM58 Professional Microphone

1 Answer

Hi everyone..:) I have a problem with my microphone. :S It's shows that everything is ok (in the control panel) but it's not.It can't record voices , and you can't hear your voice no meter what you do. But...

to to the volume icon on the task bar then double click
then go to options, properties then select recording and click ok.
then make sure that the microphone is not set to mute and the volume of the mic is not all the way down

Aug 01, 2009 | Lightwave GT-10 5 Section Aluminum...

1 Answer

My microphone doesn't do it right.

Some of the Podcast mics are condenser mics and MUST be used with a preamp or DEVICE that supplies PHANTOM power to the mic.

You computer DOESN"T supply Phantom power.

Read up on Phantom power in Google to understand it.

Apr 03, 2009 | Behringer XM8500 Professional Microphone

1 Answer

Dont know what to do

You can't hear yourself at all when recording or you can hear yourself but with a delay ?

Jun 09, 2008 | Samson C01U - USB Studio Condenser...

1 Answer

How to hear my voice through my usb microphone?

by default the playback of your voice is muted. next to your clock theres the sound speaker icon click on it, you should see microphone somewhere there, if you dont press settings from the toolbar and then properties

then on the playback make sure there is a X on microphone.

then click ok, now check is the microphone muted? unmute it and speak to the microphone you should hear your own voice played back instantly from the speakers.

Apr 24, 2008 | Logitech USB Desktop Consumer Microphone

2 Answers

No Sound Coming out my Microphone

i know this might sound a little obvious and maybe irrelevant to the problem, but did you press the switch on the mic? it will turn the mic on and off. make sure sound and mic are unmuted in windows volume control. if both are these didnt solve the problem, test the mic on another computer. if the mic works, maybe its not the mic that has the problem. if the mic doesnt work, then your mic may be defective or damaged in some way or other.

Mar 28, 2008 | Philips PH62080 Uni-Directional Microphone...

1 Answer

No volume from Audio-Technica ATM410

the mic you mention is a dynamic mic, and needs a mic preamp to get decent levels for most computer sound inputs

Nov 26, 2007 | Microphones

1 Answer

Was working at first but now sound is too quiet

check mic level on recording mixer for windows N.B. r-mixer different from playback-mixer

Apr 05, 2007 | Sony FV100 Consumer Microphone

Not finding what you are looking for?
Shure Head Set Microphone Microphone Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Shure Microphones Experts


Level 2 Expert

611 Answers

Ben Armstrong

Level 2 Expert

332 Answers


Level 3 Expert

3018 Answers

Are you a Shure Microphone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides