Question about Promise Ultra133 TX2 ATA Controller
If worse comes to worse. put the hard drives on external 3.5 cases.. i had this card i did a firmware update on it for some cdrom issue. bought it in 2000
Posted on Nov 27, 2007
Tips for a great answer:
When you boot up to the log in screen type in administrator as user to log in if you cant log in
during the boot up process you will see on the screen for a short amount of time press a certain key to enter set up press and hold that key during the boot up process to enter BIOS scroll down to set user password or supervisor password you can change or remove your password from there
The most common way that we know on how to reset or clear the BIOS password is to physically remove the power from the computer by disconnecting the power plug and then removing the Cmos battery for 30 minutes from the motherboard. Another way is to reset the clear CMOS jumper on the motherboard itself. Both of the 2 methods mentioned works because most motherboards use a battery to sustain the BIOS/CMOS settings for the motherboards PROM chip. So by cutting off cmos the battery power, the BIOS/CMOS settings will be erased.
cmos battery Under the keyboard or bottom of laptop - If you are working on a laptop computer the location of the dipswitch (almost never a jumper) can be under the keyboard or on the bottom of the laptop in a compartment such as the memory compartment. Although on some motherboards the Cmos battery is soldered in Hope this helps you
Sep 17, 2011 | Storage Controllers
i have used this software and can guarantee that it works although you might have to get a computer with an internet connection to download and burn it to a disc
UBCD4Win is a bootable CD which contains software that allows you to repair, restore, or diagnose almost any computer problem also has a bios reset tool which can remove your password and bios password
you will have to burn it to a disk as an ISO then you will have to boot from the disc During the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up process to enter BIOS the scroll down to advanced bios features press enter change your first boot device to cd press escape then press f10 to save to cmos to restart (note after you have removed your password you will have change first boot back to your hard drive)
Hope this helps
Apr 17, 2011 | Storage Controllers
Dec 09, 2010 | Promise FASTTRAK TX8660 RETAIL8PORT...
Apr 02, 2010 | Storage Controllers
Jul 13, 2009 | SIIG SATA II-150 PCI (SCSA0012S1) Serial...
Mar 07, 2009 | LSI Logic MegaRAID® SAS 8344ELP (5 Pack)...
Feb 06, 2009 | Sabrent Serial ATA (SATA) 1 External + 2...
Mar 02, 2008 | Areca ARC-1210 Serial ATA Controller
Aug 16, 2007 | Promise Ultra100 ATA/100 Pci (ultra100 tx2...
Jan 30, 2006 | HP NetRAID-2M SCSI Controller
116 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: