Question about Washing Machines
I have a kenmore 90 series top load washer theat goes through the entire cycle but at spin it doesnt spin. It does make a noise like it should be spinning but when I open the lid to take a peak the drum isnt moving. Please help! Ive checked the coupler and the transmission was replaced but still no spin.
If your trans and coupler are good then I would suspect the drive block or spin tube. You will have to remove the trans to change out the spin tube. Take out the basket, there should be 2 ears from the spin tube that nest in the drive block. Attached is a photo to help you understand. Before all this make sure nothing is caught between the basket and the tub. Catriver
Posted on Nov 27, 2007
Tips for a great answer:
May 16, 2015 | Kenmore Washing Machines
Sep 11, 2014 | Kenmore 387780 series 80 Washer Motor
Nov 13, 2010 | Kenmore Washing Machines
Sep 21, 2009 | Kenmore 24032\24036 Top Load Washer
Mar 01, 2009 | Kenmore 3.2 cu. ft. Plus Top Load Washer
Feb 13, 2009 | Kenmore 24032\24036 Top Load Washer
Dec 01, 2008 | Kenmore 3.2 cu. ft. Plus Top Load Washer
981 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: