Question about Xerox DocuColor 12 Printer

1 Answer

Xerox WorkCentre 255

How to reset and how to identify error code

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 2,035 Answers
Re: Xerox WorkCentre 255

CAUTION: The Fuser Roll remains in a cammed-up position if power to th... The Fuser Roll will not be released from its position until the power ... To prevent damage to the Fuser Roll, switch the Power On as soon as po... more..

follow the instruction in the link::,/?St=190,E=0000000000540251539,K=2161,Sxi=15,Solution=obj(7723)

Posted on Mar 25, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

3 Answers

I have a Xerox workcentre 7345 and reported that the transfer belt cleaner needed to be replaced. I replaced it and the message is still appearing.

you have to reset the hfsi counters for the cleaner. in diagnostics go to hfsi and there are 3 numbers you have to reset. 954-802 954-803 954-804 then exit diagnostics.

Jan 14, 2011 | Xerox WorkCentre M-24 Color Copier

1 Answer

Error code 39,003,40;61256 on a xerox workcentre

Here is the easy solution to fix the issue :

Click on the link and follow instructions to fix the issue.

Dec 02, 2009 | Xerox WorkCentre C2424DN All-In-One Laser...

3 Answers

System unavailable in xerox pro 255 :(

esto lo puede dar el cartucho de copia mal insertado q produce arcos de la fuente de alta y la desconecta dando error 9060, tal vez el corotron roto del cartucho de copia.... otro padrenuestro

Oct 08, 2009 | Xerox WorkCentre M-24 Color Copier

1 Answer

H2 Blinking on the panel

Error code means that:
H2 Thermistor Open

Part #
Xerox Workcentre Pro 16FX, Xerox Workcentre XD100, Xerox Workcentre XD102, Xerox Workcentre XD103F, Xerox Workcentre XD104, Xerox Workcentre XD105F, Xerox Workcentre XD120F, Xerox XC1020, Xerox XC1040, Xerox XC820

Mfr Part #: RDTCT0128FCZZ

Xerox Workcentre Pro 16FX, Xerox Workcentre XD100, Xerox Workcentre XD102, Xerox Workcentre XD103F, Xerox Workcentre XD104, Xerox Workcentre XD105F, Xerox Workcentre XD120F

Mfr Part #: CTHM-0019DS52, CTHM-0019FC52

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Feb 21, 2009 | Xerox WorkCentre XD100 All-In-One Laser...

1 Answer

Xerox Workcentre Pro16fx - H4 error code after power outtage

You shut the machine off then on, Press Clear, auto,clear , auto, then when the lights go out, program it as if you were running 14 copies. press start and that should reset it.
Thats the redish pink clear button and the auto exposure button, Clear, Auto , clear auto, and the display goes blank , enter 14 and start. Dont ask me why I repeated that LOL

Feb 02, 2009 | Xerox WorkCentre XD100 All-In-One Laser...

2 Answers

Reset WorkCentre 24, Xerox

In menus you browse to the service tab, then serivice diagnostics. Go to NVRAM reset and perform the NVM reset.
Before you do that, print out a configuration page if you want to rememebr the network settings. It will set the IP address back to default also.

Apr 03, 2008 | Xerox WorkCentre M-24 Color Copier

1 Answer

Xerox xd100

See this thread, someone with a similar problem to you:

I'll summarize the solution:

The "software" H4 problem is quite common that Xerox has a resolution on its website

Solution: Perform a Fault Reset 14
Performing a Fault Reset 14 will reset your WorkCentre and will help to clear error codes.

1. Find the pink Clear button on the Control Panel of the WorkCentre.
2. Find the button below the word Auto.
3. Press these buttons in the following sequence: [Clear], [Auto], [Clear], [Auto]

NOTE: All of the lights on the Control Panel should go out and the LED Display should go blank. If the lights do not go out, then repeat step 3 until they do. It may be necessary to increase or decrease the pace of the [Clear], [Auto], [Clear], [Auto] sequence.

4. Press the [10's] key one time and the [1's] key four times to enter '14' in the LED Display, as if you were to make 14 copies.
5. Press the green [Start] button.
6. Press the pink [Clear] button two times.
7. The WorkCentre should now warm up and come to ready.
8. If the above steps do not clear the error code, repeat steps 3 to 6 a second time.

Feb 08, 2008 | Xerox WorkCentre XD100 All-In-One Laser...

Not finding what you are looking for?
Xerox DocuColor 12 Printer Logo

Related Topics:

282 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Printers & Copiers Experts


Level 1 Expert

185 Answers


Level 2 Expert

110 Answers

Patrick Carmichael...
Patrick Carmichael...

Level 2 Expert

107 Answers

Are you a Xerox Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides