GE Profile Fridge Model No. PSC25MSWA SS not making ice

Try defrosting entire unit. Put all food, freezer and refrigerator sides in coolers with ice. Unplug unit and wait at least 24 hours for unit to completely defrost, if neccessary open doors, plug unit back in and see how unit functions. By doing this lines that carry freon should become unclogged.

If you need further help, reach me via phone at https://www.6ya.com/expert/frankie_091f536560a54e12

Musta been defrosting. This service manual for GE profile side by side ice box explains how it works.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Hello:
Your main control board is defective...It is located in the back of the fridge.. Very common problem with this model..

Part #WR55X10942

HI no these techs are wrong, you need to change the motherboard, gas/freon leaks are less than 2% of failures on GE refrigerators. Change the board and you will be fine.



Sean

CONTACT DEALER OR COMPANY

GE refrigerator Model PSC25MSWCSS


Outside of Freezer bin forms ice
How can I fix it.

Hirota

Hi,
The first step you need to do is to turn the water off to the refrigerator so it quits making until you get it fixed.
If your fridge has the control boards in each side of the freezer cabinet that controls the icemaker, then you have a failed board. If you have a standard icemaker with the metal shutoff arm then you have a failed motor module in the icemaker. You can remove the icemaker and unplug the wiring connector from it so you can leave the water on to the dispenser.
Thank you for contacting Fixya.com

The temp should be around 5 degrees.

THIS IS CAUSED MORE COMMONLY BY A FAILURE TO THE MAIN PROCESSING BOARD NOT SENDING PWR TO THE DISPENSER RELY BOARD

If you need further help, reach me via phone at https://www.6ya.com/expert/marlon_56d9a24f02585258

are you sure it is not a GSS or a PSS model i have the manual on that post your email and i will send it to you