There is a display on the screen saying a program is being recorded. How do I get that off so I can change channels. I do not have a VCR connected to the tv so don't understand how this display appeared on the tv. I do have a DVD player connected but it does not have recording capability.
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones). click here to download the app (for users in the US for now) and get all the help you need. Good luck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Step 1: b> While TiVo and other devices allow users to record and play back their favorite TV shows and movies whenever they want, those who watch television on their laptops have been forced to rely upon a number of different Internet websites that host movies and television shows. Fortunately, hardware and software now exists that allows laptop users to record TV shows directly onto their laptops and replay them whenever they like. All they need is an open USB port.
Connect the USB TV tuner to the laptop using a free USB port. Connect the cable wire to the USB tuner's cable input. Insert the TV tuner's installation disk into the laptop and follow the on screen directions to install the appropriate drivers and software. When prompted by Windows, select "install software automatically" to install the device drives. When prompted by the WinTV software to choose which programs to install, ensure that the option for the WinTV scheduler is checked. Launch the WinTV 2000 software now installed on the laptop. Press the "scan" button to load all of the available television channels. The channels that the tuner is able to locate will be displayed in the bottom half of the screen. Press "close" when the scan is complete. The amount of time to complete this step will vary depending on the number of channels being added. Choose a channel to record using the channel selection buttons on the left hand side of the on screen menu now displayed. Press the "record" button located on the bottom of the screen to record the program current displayed on the screen. Alternatively, recording can be scheduled using the WinTV Scheduler software included in the WinTV installation package. From the WinTV Scheduler main window, press "add program". Next, enter the time and date in addition to the channel to be recorded. Finally, click "save program". While recording TV on the laptop is not nearly as straightforward as it is with Tivo and other similar devices, the above methods are both reliable and relatively intuitive.
Hi, poog_23350, I caught your post! How a Duo DVR receiver works is that the TV you have it set to record on will not allow you to change the channel while the recording is in progress. The other TV, that isn't recording anything, can be used freely to flip through channels.
In this case, it's TV2, the one upstairs in your daughter's room, that's currently set to record on while the downstairs TV is free to use. This can be adjusted by pulling up the Main Menu with the Menu button on the remote, selecting option 8, then option 5, and changing the TV1/TV2 setting there on the Record Plus screen.
If you'd like a receiver capable of allowing channel changing while recording a program, our VIP 612 receiver is a Solo receiver that acts like a Duo. What this means is that it has one TV output and two tuners. Along with being able to change channels while a recording is in progress with this type of receiver, you can also record two programs on two different channels simultaneously.
For anyone who has an RCA DRC 8335 with dvd Recorder, here is a suggestion.
If your tapes have been recorded in SLP Mode, om another player, I can tell you they will NOT play on this thing!!
So, merely take another VCR, and a blank tape, Place the blank tape into the RCA DRC 8335 VCR side, and then, go to its Set-Up Menu, and go to OUTPUT. On the "ACTION BAR"Change the the RCA's output to "FRONT" and then, play the VCRr you stuck on top of the RCA!!
When the inage on the "Source tape is shown,
Record onto the RCA, in SLP Mode, Now, it will play, just fine.
Hope this helps. Jon (Found BY Accident!!)
Why not simply record a channel tuned into the vcr and use your tv remote to watch a channel tuned into your tv? that is how it is normaly done... don't forget a vcr/pvr/dvd recorder has it's own channels just like a tv does... just no screen of it's own the tv has of course it's own channels and in fact does not even need to be switched on in order for your recorder to record a program neither does the recorder need to be on to use your tv
Your two problems are related - the DVD player lost contact with the local PBS channel, which altered its internal clock.
Add a red, white and yellow cable from one of the outs on the back of the cable box to the slot marked AV1 IN on the back of the Philips. Then redo the channel programming - press the System Menu button and change Tuning Band to CATV - it will then ask you if you want to do an Auto Channel Set - say Yes.
Once it is done with the channel programming, turn the DVD player to whatever channel PBS is on in your area's cable service. Then go back to System Menu - select Clock Set and go to Auto. Alternatively, you can select Manual under Clock Set and change the date by hand).
Are you using the cable connectors to go into the VCR, and then from the VCR to the TV?
If so, turn the VCR on. Put the TV on channel 3 or 4 (depending on
which one you have it set to. If you are unsure, try both channels one
at a time) Press the VCR/DVD button so the display on the VCR says VCR
(not DVD). Now, you should be able to change the channel with your VCR
remote control. If not, you have a problem with your cables. Make sure
your cable from the wall goes to RF IN on your VCR. The RF Out on the
VCR should go to your TV ANT In or TV RF In.
If you have successfully gotten your TV to display the TV station shown
on the front of your VCR, then all you have to do is put in a tape,
select the channel you want to record and press the record button.
If you want to watch another channel while you're recording, press the
TV/VCR button on the VCR remote, then use your TV remote to change
When you want to stop recording, press the stop button, put the TV back
onto channel 3 or 4 (depending on what you have it set to) and press
the TV/VCR button on your VCR again. From here you can rewind and view
On a Panasonic to do a factory reset while the set is on press in on the power and action buttons on the front of the TV at the same time. In a few seconds the screen shouls go blank and come up with a screen that says "CHK" in the upper left hand corner. Once it does that press the action button again to clear the screen. You have now reset the TV to factory settings and will have to re-program the channel memory once again. Hope that works...