Error message : E000025-0002 on my canon imagerunner 5070

drum heating control problem

e000280 is a fan error check this at side door
e000025 is a toner error .an unmatched toner in m/c plz replace with another toner .before u install a new toner clean the devoloper unit

You need to clean the Meg toner senser. remove front cover under the toners, second senser from the left.In Case You Still face Problem and Need Online Assistance Then Please Follow Us For On :Canon Printer Support

There is a toner feed motor over-current detection error,
- Check the connector for any fault in
connection.
- Replace the motor.

ur hopper moter does not move in 3 second pls cheak ur hopper moter signal ;gear

An over-current has been detected in the toner feed motor. - Check the connector for any fault in connection. - Replace the motor.

This is a toner feed motor ( FK2-0015-000 ) error. This the bigger motor of the toner hopper assembly. This is not that difficult to replace. If I remember correctly you just have to remove the door and cover on the right side of the hopper assy. Hope this gets you started corectly.

E000004-0010

BOS BAGAIMANA CARA MENGHILANGKAN EROR E000025-0001
PADA MESIN CANON IR5570?
SUDAH SAYA COBA PAKAI *28* FUCSION-CLEAR-ERR-OK
TIDAK BISA JUGA BAGAIMANA SOLUSINYA BOS

there is a toner feed motor over currente detection error, there is a toner botle motor connection detection error.
1- check the connector for any fault in connection.
2- replace the motor