Question about HP OfficeJet 6110 All-In-One InkJet Printer

2 Answers

How can i remove the paper inside the printer

I am making copies of one document then accidentally the printer turned off in his own.and then we cannot get the paper inside the printer and now we cannot turn on the printer how can i solve this problem?

Posted by on

  • Francis Mark Arango
    Francis Mark Arango May 11, 2010

    See at the back of the printer if there's paper jam window remover.

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 48 Answers

Step 1: Check and remove any paper stuck in the paper in tray
·Remove all loose paper from the paper in tray.
·If more than one sheet is stuck in the printer, remove the paper one sheet at a time.
·Take hold of a sheet in the middle of the stack with both hands and firm, even pressure, pull the sheet toward you.
· Usually, removing one or two sheets from the middle of the stack releases the pressure and the rest of the stack can be removed.
·After you have cleared the paper, check to make sure no scraps of paper are stuck in the printer.
Step 2: Clear paper jam from the back of printer

If the paper jam is not easy to reach from the tray
Note: The back of the printer could have a rear access door or a two-sided printing accessory also known as a duplexer.

  • Turn the knob on the rear access door counter-clockwise.
  • Remove the door.
  • Pull the jammed paper out of the printer.
  • Check to make sure no scraps of paper are stuck in the printer.
  • Put the rear access door back into the printer.
  • Turn the knob on the door clockwise.

Step 3: Remove the two-sided printing accessory to clear the paper jam

  • Simultaneously press the RELEASE buttons on each side of the module and remove it.
  • Pull the jammed paper out of the printer.
  • Check to make sure no scraps of paper are stuck in the printer.
  • Push the module back into the printer until it snaps firmly into place.
Note: Do not press the buttons on the ends of the module while replacing it.
·Press the button on top of the two-sided printing accessory and open the door.
·Pull the jammed paper out of the module.
·Check to make sure no scraps of paper are stuck in the printer.
·Close the duplexer door.
Step 4: Lift the front cover and slowly remove any jammed paper.
After trying all the other options listed, open the front cover, grasp the jammed paper and SLOWLY pull it out.

Posted on Apr 06, 2017

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 99 Answers

For the paper jam issue turn around the printer and open the back door to pull the paper.
and for the power issue unplug power cord from wall and from the printer side too,plug everything back and ready to work.

Posted on Aug 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lexmark X4530 won't load paper to copy


Leading cause of paper jams is debris / foreign objects that accidentally fell into the paper feed area. Please try this approach to fix the problem:

  1. Remove the sheets of paper from the feeder.
  2. Grab a flashlight and look inside the feeder for any debris or foreign objects.
  3. If you're willing and physically able, you may also carefully turn the printer over. Any debris should just freely roll out from the feeder.
  4. If feeder is clear, place the printer on the table. Open the printer cover and remove the cartridges.
  5. Check the cartridge area for any obstructions in the paper path.
  6. Close the printer cover.
  7. Re-brick your printer by pulling out the power supply - the black box where the power cord is plugged into. Re-plug after 30 seconds.
  8. When the printer turns on, reinsert the cartridges and load some paper. Try to print again to verify that the problem is fixed.

Mar 16, 2012 | Lexmark Office Equipment & Supplies

1 Answer

Rint,copy,scan or fax on my x5470 lexmark all in one. I unplug and restart compture and the fax still says paper jam check rollars dont see noughting.


Leading cause of paper jams is debris / foreign objects that accidentally fell into the paper feed area. Please try this approach to fix the problem:

  1. Remove the sheets of paper from the feeder.
  2. Grab a flashlight and look inside the feeder for any debris or foreign objects.
  3. If you're willing and physically able, you may also carefully turn the printer over. Any debris should just freely roll out from the feeder.
  4. If feeder is clear, place the printer on the table. Open the printer cover and remove the cartridges.
  5. Check the cartridge area for any obstructions in the paper path.
  6. Close the printer cover.
  7. Re-brick your printer by pulling out the power supply - the black box where the power cord is plugged into. Re-plug after 30 seconds.
  8. When the printer turns on, reinsert the cartridges and load some paper. Try to print again to verify that the problem is fixed.

Dec 09, 2011 | Lexmark X5470 All-In-One InkJet Printer

1 Answer

Paper jamm


Leading cause of paper jams is debris/foreign objects that accidentally fell into the paper feed area. Please follow steps below to fix the problem:


1. Remove the sheets of paper from the feeder.

2. Grab a flashlight and look inside the feeder for any debris or foreign objects.

3. If you're willing and physically able, you may also turn the printer over. Any debris should just freely roll out from the feeder.

4. If feeder is clear, place the printer back on the table, open the printer cover and remove the cartridges.

5. Check the cartridge area for any obstructions/debris in the cartridge carrier's path or the paper path.

6. If cartridge area is clear, close the cover.

7. Re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds.

8. When the printer turns on, reinsert the cartridges and load some paper. Try to print a document again to verify that the problem is fixed.

Oct 13, 2011 | Lexmark X6675 Pro Colour Wireless...

1 Answer

Printer is making a clicking sound when trying to print and paper won't feed all the way through. This is the first time this has occured. I have turn the printer off, turned off the computer and...


Leading cause of paper jams is debris/foreign objects that accidentally fell into the paper feed area. Please follow steps below to fix the problem:


1. Remove the sheets of paper from the feeder.

2. Grab a flashlight and look inside the feeder for any debris or foreign objects.

3. If you're willing and physically able, you may also turn the printer over. Any debris should just freely roll out from the feeder.

4. If feeder is clear, place the printer back on the table, open the printer cover and remove the cartridges.

5. Check the cartridge area for any obstructions/debris in the cartridge carrier's path or the paper path.

6. If cartridge area is clear, close the cover.

7. Re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds.

8. When the printer turns on, reinsert the cartridges and load some paper. Try to print a document again to verify that the problem is fixed.

Sep 24, 2011 | Lexmark X73 All-In-One InkJet Printer

1 Answer

Hello. I have a Lexmark x4650 printer/scanner/copier and the paper starts to feed thru and then pulls to one side. I am then unable to print my document. Why does this keep happening and how can i solve...


Try to remove the sheets of paper from the feeder. Grab a flashlight and look into the feeder for any foreign objects that might have accidentally fell into it. If feeder is clear, open the printer cover and remove the cartridges. While the printer cover is open, check inside for any obstructions in the paper path. If none, then close the printer cover. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reinsert the cartridges. Close the cover. Load some paper (avoid overloading). Try to print again.
If problem continues, please contact Lexmark Technical Support Center for additional assistance.

Jun 21, 2011 | Lexmark X4650 InkJet Printer

1 Answer

Printer error has occurred 6000


Error 6000 gets displayed when there is a paper jam or other general malfunction. When the message "6000 Printer error has occurred. Turn off the printer then back on again. If the problem persists, see the manual." Is displayed, something may block the paper feed tray from opening.
If the printer is surrounded with documents or when you copy large documents such as books, make sure that you secure the clear space in front of the tray before printing / copying. When the error message above is displayed and if you find something is in front of the tray, remove it. Then, turn OFF the printer and back ON again and the printer will be ready for printing.
If you still have the trouble, contact the repair service.

Check the printer for any paper jam or try to reset the printer to release memory code errors.

1. Press and hold the Resume button for 1 - 2 minutes.
2. Open the cover.
3. Remove the cartridge and then reinstall it.
4. Close the cover.
5. Turn Off the printer.
6. Turn On the printer.


I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Feb 14, 2011 | Computers & Internet

1 Answer

Scans two copies of the same document on one page.


the easiest is to copy to document, then take the new copy and put it back in the paper tray but now make sure to turn it head to bottom.

  1. copy a the document
  2. take to copy and put it back to the tray (usually upside down) and make sure to turn the paper so the image is at the bottom of it.

Nov 10, 2010 | Office Equipment & Supplies

1 Answer

Printer was working fine, until it's outflow was accidentally obstructed. Obstruction removed, but now error light comes on immediately, and printer won't print. There is nothing blocking the paper path,...


Try this troubleshooting prodedure. Turn on/off, unplug, plug in2_bing.gif, should reset configs.

Take all the paper out, put half as much back in.
check the rollers to make sure no paper or particles are stuck preventing from accepting paper.

Go to applications folder for your computer, dbl click printer icon for make of printer. check settings. print 'test document and clean cartridge heads', this should ensure proper printing formats.

Go to web site of printer model and check site for trouble shooting if this does not work above. Hope this helps and good luck

May 31, 2010 | Brother HL-2170W Laser Printer

2 Answers

Stylus CX9400 Photo Printer: paper jammed inside printer...


If paper is jammed, a Paper jam message will appear on the control panel display.

Follow these steps to clear the jam:

  1. Gently pull any jammed paper out of the output tray or sheet feeder.

  2. If the paper is stuck inside, turn off the Epson Stylus CX.

  3. Open the scanner, remove the jammed paper and torn pieces, close the scanner, and turn the Epson Stylus CX back on.

    alert_note.gif Note: Be sure to check the far left of the carriage area when checking for jammed paper. Paper that is jammed there may be hidden from view.
If paper jams inside the Automatic Document Feeder, clear the jam as follows:

  1. Open the Automatic Document Feeder cover and remove any jammed paper.

    pm_paperload_215_er.gif

  2. If necessary, lift the document cover and remove any paper that has jammed inside.

    pm_paperload_216_er.gif

  3. Press OK to clear any messages on the display screen.

May 18, 2010 | Epson Stylus CX9400 Photo Printer

1 Answer

Auto document feeder


Did you make sure the tape is removed inside the Document feeder,or maybe you need to check to see if anything is stuck in the rollers. Open the door (if you have not already done so) to the document feeder and you will see pictures on the inside showing how you can remove and/or change the roller (make sure everything is put back as the picture. Good luck, I hope that is all that is wrong with it.

Dec 26, 2008 | HP Officejet Pro L7780 All-In-One InkJet...

Not finding what you are looking for?
HP OfficeJet 6110 All-In-One InkJet Printer Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...