I have an old astrostart 2W model NJQ372HAF I need the battery compartment cover

To change the battery on your Night Owl Explorer NOCX3 monocular, you will need to follow these steps:

1. Unscrew the battery compartment cover located at the bottom of the monocular 1.
2. Remove the old battery from the compartment 1.
3. Insert a new 3-volt lithium battery (123 type), which is also known as the CR 123A, EL 123AP or DL 123A 1.
4. Screw the battery compartment cover back into place 1.

Please note that some models of Night Owl Explorer use 2 standard AA batteries instead of a 3-volt lithium battery 1.
I hope this helps you change the battery on your Night Owl Explorer NOCX3 monocular! Let me know if you have any other questions.

Please always refer to the user manual.
Night Owl NOCX3 Manuals and User Guides, Monocular Manuals - All-Guides.com (all-guidesbox.com)

REMOTE START, CRAZY ADD ON.
WHY NOT ASK THEM FOR SUPPORT.
MY GUESS IS WRONG BATTERY.
WHAT MEANS RRS? A HUGE TYPO FOR RSS???????? WOW IF TRUE.

https://www.astrostart.com/Products/RemoteStartSecurity/4306/RSS-5225.aspx






i READ THE MANUAL THERE RSS5225
IT SAYS CLEAR AS DAY THIS.

:Your remote is powered by an internal rechargeable battery that can only be serviced by an authorized Directed dealeR"

READ THIS? PAGES ON CHARGING IT

https://www.directeddealers.com/manuals/OG/AstroStart/RSS-5225_OG-Eng-2.pdf

PAGE 7 CHARGING WITH USB

THE FOB IS 13 YEARS OLD RIGHT.
AND NO BATTERY LASTS FOR 13YEARS, AND MUST BE REPLACED
SO PULL IT OUT AND POST PART NUMBERS ON IT.

To replace the battery on a remote, you will typically need to remove the back cover of the remote to access the battery compartment. Here are the general steps you can follow to replace the battery on a remote:

1. Locate the battery compartment: The battery compartment is usually located on the back of the remote and is typically held in place by a small latch or a screw.
2. Open the battery compartment: Depending on the design of the remote, you may need to use a small flathead screwdriver or a coin to open the battery compartment. Some remotes have a latch that you can slide to open the compartment, while others have a small screw that you will need to remove.
3. Remove the old battery: Once the battery compartment is open, you can remove the old battery by gently prying it out of the compartment using a small flathead screwdriver or a similar tool.
4. Install the new battery: Insert the new battery into the battery compartment, making sure that the positive and negative terminals are oriented correctly. The positive terminal is usually marked with a + symbol and the negative terminal is usually marked with a - symbol.
5. Close the battery compartment: Once the new battery is installed, close the battery compartment and secure it in place using the latch or screw.

If you are having difficulty removing the back cover of the remote or are unsure about how to properly install the new battery, you may want to refer to the owner's manual for your specific remote or contact the manufacturer for assistance.

I have been searching 10 minutes and find nothing regarding it being compatible. Your best bet is to go to a local alarm installer and ask them to set it up. Or just try it.

https://www.google.com/search?q=AstroStart+rs415
AstroStart 2611D-TX 1-Way 1 Button DS4 Replacement Remote Control Transmitter

• AstroStart Model 2611D-TX
• 1-Way 1 Button Replacement Remote Control Transmitter
• Orange LED
• FCC ID: EZSDEI7616
• Includes Key Ring
• Compatible with **** DS4 / DS4+ Systems ****
• Up to 1/2 Mile Range
• Uses CR2016 Batteries (included, in remote)

Turn the battery cover clockwise to remove insert new AA battery. Make certain the polarity is o.k. put the cap back on and turn counter clockwise.

wrong site notify locksmith

Hi! To change the battery for a Babyliss Pro FX760 hair trimmer, you will need to follow these steps:

1. Make sure the trimmer is turned off and unplugged from the power source.
2. Locate the battery compartment. This is typically located on the bottom or back of the trimmer.
3. Remove the battery compartment cover by pressing the release button or sliding the cover open.
4. Remove the old battery by gently prying it out of the compartment using a flat-headed screwdriver or a similar tool.
5. Insert the new battery into the compartment, making sure it is oriented correctly and seated securely.
6. Replace the battery compartment cover by sliding it back into place or pressing it down until it snaps into place.
7. Plug in the trimmer and turn it on to test the new battery.

It is important to note that the specific process for changing the battery in a Babyliss Pro FX760 trimmer may vary depending on the specific model and design of the trimmer.

Note: The battery in a Babyliss Pro FX760 trimmer may vary depending on the specific model and design of the trimmer.

i have an astro start remote but i tried to hook up a trailer brake now the vehicle wont start