I have the modelMC42 1012L system, and lost the plug in, during a move. Where might I purchase just the plug in??

looks like a standard computer pc plug to me

I believe what your looking for is called an IEC C5 Plug. These power cables and adapters are available through eBay.

http://shop.ebay.co.uk/i.html?_from=R40&_trksid=p5197.m570.l1313&_nkw=IEC+C5&_sacat=See-All-Categories

We are looking for the same remote thatch lost. Any ideas

This crib has been recalled by the CPSC, I just found that out tonight, I have one too. The crib killed an infant in Massachusets, you should immediately stop using it and return it to the store where you bought it.

http://www.cpsc.gov/cpscpub/prerel/prhtml10/10211.html

and

http://www.cpsc.gov/cpscpub/prerel/prhtml10/10344.html

if your GF wants you to separate the three in one coffe what well you do?

You are going to need an original Mitsubishi remote--I do not think in the main menu there is a way to do this without the remote: PART NUMBER FOR THIS REMOTE IS: 290P111010


Almost any Mitsubishi remote that has the FORMAT button on it will work.

If this has helped you rate this solution as I do this here for free.

SD TECH

Hi Kitch,

Been there. If you have a goodwill near you, I have found the to be a great source for just about every power cable I have ever lost and needed to replace. Each one is usually about $1.00

Good luck,
Mike

Either call or contact the company by phone and ask for assistance in replacement parts.

i had the same problem after i moved and everything ran but when i put in a cd the disc would spin for awhile then change to the next disc and just kept spinning and moving from one disc to the other none stop. so i opened mine up turns out during the move there is a small black plastic piece that sits on top of the laser in the middle it shifted during the move making it block the view of the disc. you will have to carefully remove the plastic piece from the top of the laser with out touching the laser lens and that fixed mine good as new. my problem is i need the remote code movers lost my remote and can't find the code to use the replacement i bought. Hope it helps if this is the same problem i had should work. i tried to move the black piece back into place but it just did not go back right to just removed it all together. they did not use anything to really hold it into place to avoid slipping.

Try the"Products American "web site . They carry all type of baby crib parts & whole kits..www.productsamerica.com