How do you threadup a Frister Rossman Cub 5 Super-Stitch sewing machine

There are some videos in the link. If the bottom stitch isn't locking in, that sounds indicative of either the bobbin case is not in properly or the bobbin isn't threaded correctly. Manuals for this model are only available for a fee. This is the second Frister and Rossman machine I have seen today, and never seen them on here in the last 12 years!

https://www.google.com/search?q=Cub+3+sewing+machine

..

try manufacturer or online search

If you are still having problems after installing a brand new needle, then the machine has probably been knocked out of time. Search for "sewing machine timing" or take it for service.

Pull at least 5 inches of thread tail through before taking the first stitch. It also helps to have the needle at its highest point when beginning the first stitch. Hold both thread tails lightly in the left hand while taking the first couple of stitches.

Any sewing machine repair and sales service.

Sorry we do not sell parts here or have any way to locate them for you.

check with sewvacdoctor.com

It will be available at authorized dealers

You may need to retime the machine if you have made sure the needle is in the correct way round, I can attach instructions if you email me [email protected]