Question about Hotpoint Ultima WF860 Front Load Washer
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Hotpoint ultima wf860
hi, i have the same machine..i have a feeling it does this annually to make you call an engineer. to reset it do this; hold the 'start' button until all lights display, then press 'start' again. hold the 'start' and 'on/off' button together until it reads d-end or d-off. it doesnt always work 1st time so keep trying, good luck x
Posted on Nov 14, 2006
If it spins the balance is okay. Check out your filter now. And then the pump (after the spigot prob below)
Check your exit hose spigot, it may be clogged. This is if your filter is all clean. There should be air for passage in the standpipe behind. Your hose should not fit airtight into the standpipe and neither too deep into it. Snaking out your standpipe would be good too.
Rate me pl.....if helped.
Posted on Jan 06, 2008
If you spin the drum by hand, and it is niosy and rumbling then the main drum bearings have failed.
If under 5 years old, then you should be able to get it repaired under Hotpoint 5 year guarantee, You just pay for labour and call out, cheapest option, it is not really a D.I.Y job, as it is quite involved, and entails a lot of work.
Please rate my advice.
Posted on May 27, 2009
Tips for a great answer:
Jan 10, 2011 | Hotpoint Ultima WF860 Front Load Washer
Oct 25, 2009 | Hotpoint Ultima WF860 Front Load Washer
Feb 26, 2009 | Hotpoint Ultima WF860 Front Load Washer
Apr 10, 2008 | Hotpoint Ultima WF860 Front Load Washer
Aug 21, 2007 | Hotpoint Ultima WF860 Front Load Washer
May 16, 2015 | Hotpoint Ultima WF860 Front Load Washer
45 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: