Question about Microsoft LifeCam VX-3000 Web Camera

1 Answer

Background Static Noise

I hear static along with the voice from the person with whom I am connected. They are using version 1.0 and i am using version 1.4. They have no audio problem. Thanks.

Posted by on

  • Anonymous Nov 25, 2007

    When I test my LifeCam I can hear my voice, but lots of static.

  • Anonymous Dec 26, 2007

    My contact complained of hearing a "crunching" static sound. Also, the microphone seemed to pick up a lot of feedback while I was talking, forcing me to periodically mute my microphone.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype set it up as follows:

  1. Go to TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if installed properly will come up and show a picture.
  4. Then on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now see and talk to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

C. Windows Live Messenger:

  1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
  2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
  3. Next go to the Menu Bar on right side, click on “ “Action.”
  4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: You audio and video should work. Enjoy.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Posted on Jan 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Background noise problem with motorola radius cp200 and also crackling status during transmissions


Bill,
If the crackling and static are coming from the radio, it could mean 1) Something in your environment is putting out RF (radio frequency waves). 2) You have an old battery. 3) You are at the edge of the radio's range. 4) You have a bad speaker in the radio.

Possible solutions for you could be:
1) Have the radios reprogrammed to have Private Line (PL). This would block out RF noise on your frequency. Also, within the factory if there are devices putting out RF noise, there may be some solutions for them.
2) Replace old batteries. (Try a known good battery and see if it helps.)
3) Check to see if you have the same problem when radios are within a closer range. If it is a range problem, education yourself and other users to hold the radio upright (perpendicular) to the ground. You will get the best range. Tilting the radio can reduce range as much as 2/3s. Even the bodyfluid of a person wearing the radio can absorb range.
4) See if you have the same problem with another radio, or if the crackling static is just with the one radio. It may need repaired.

Another solution for you might be a noise canceling remote speaker mic. This would put the speaker of the radio up on your lapel. And these mics also have some noise/wind canceling ability.

There are a few programming things you could have your local dealer try. They may be able to tighten up the squelch and knock out some of the noise.

Best regards.

Mar 11, 2013 | Radio Communications

1 Answer

How can I clean up a recording that is full of noise & static?


I Don't know of any Olympus proprietory program to remove noise but if you can export it to a .wav format, it can then be edited and cleaned up digitally buy any semi pro sound editing software.such as sony's Sound Forge or cubase? cakewalk. software used for edit old records for conversion to cd may also help here. From there you can then save to cd for playback. If sound editing is beyond you, contact a recording studio or media house that produces commercials, they may be able to help.
Hope this is helpful

Jan 15, 2010 | Olympus VN-4100PC Digital Voice Recorder

1 Answer

User hears faint static while on a call. It's not load enough to make it hard to hear the caller, but a noticable crackling/static noise can be heard in the background. happens on every call.


Cell phones transmit the sound as digital data. The data when converted back to analog to listen too CAN have "digitizing noise" which will sound like static.

WORSENING the problem is if there is noise in the background of the person sending the voice and the worst possiblle is to have MUSIC in the background. These both drive the CODEC (the analog conversion system) crazy and will create what you describe. The CODEC is designed to transmit ONLY voice.

Oct 23, 2009 | Motorola Mobility Moto Q

1 Answer

Static noise in Yamaha HS50 monitor


Sounds like the voice coil is damaged on the woofer. If you GENTLY press in on the woofer cone, and release, you should not hear any scratching noise. If you hear noise, the woofer needs replacement.

Aug 18, 2009 | Yamaha HS50M Main / Stereo Speaker

1 Answer

I can fax out but I can't receive faxes.


What happens if you dial your fax number the way you make a normal voice call? Does the fax machine pick the line up? Can you hear it making electronic noises? Do you hear any static or line noise?
Try also putting a regular phone on the fax line and attempt to make voice calls to test the lin quality. Listen for static, noise, volume issues. Report problems to your telecom company if you have trouble in voice calls.

May 06, 2009 | Office Equipment & Supplies

1 Answer

Static


If the telephone line itself is static-free, connect a normal telephone to the same jack that the answering machine uses. If all calls are static-free, you've cleared the wiring and the telephone service provider. Next, plug the telephone into the jack on the back of the answering machine. If all calls are clean, but messages are still loaded with static, then we may be talking about a bad answering machine. If you have DSL service, make sure that there is a filter installed between the wall jack and the cord that goes to the answering machine.

Dec 03, 2008 | AT&T 1738 Digital Answering Machine

1 Answer

T-629 Background Static/They can't hear me


You had a bad speaker and need to be replaced

Dec 04, 2007 | Samsung SGH-t629 Cellular Phone

2 Answers

Background static


1. How old are you phone lines in the house?  Check the "main" terminal connections.  Clean and reconnect.  (Make note how the wires are connected).

2. The power transformers for the phones maybe you trouble also. Unplug all except the main unit.   Check each transfer one at a time. Do you have static?  One or more may be your problem.  Replace the bad ones if needed.

Oct 04, 2007 | Uniden TRU8885-3HS Digital Cordless Phone

2 Answers

Message Pad does not replay


Is there a fan or another noisy device running in the background when you leave the message? You might contact call the GE Answer Center at 1-800-626-2005.

Sep 24, 2007 | GE JVM1660 Microwave Oven

Not finding what you are looking for?
Microsoft LifeCam VX-3000 Web Camera Logo

1,609 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2983 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...