Wsf6606x all red lights flashing it won't wash

https://www.winningappliances.com.au/manuals/wsf6606x/wsf6606x_usermanual.pdf Westinghouse WSF6606 User Manual Failure Codes And What To Do In Case Of...

WSF6606X+stainless Steele dishwashers showing Fault F1 what does it mean?

overflow prevention

Check the water pump to be sure it is not blocked. Most commonly coins

Cycle light flashes, but machine wont start - Kenmore Elite ...

https://www.ifixit.com/.../Cycle+light+flashes,+but+machine+wont+...
iFixitThe Kenmore Elite HE3 is a washing machine by Kenmore. ... Whatever cycle I choose, the light just flashes and holding the start button ... I don't seem to have a black pin....the normal wash button just keeps flashing and won't let me start or .

The good ol' Whirlpool Lid Lock Flashing Light Problem - ApplianceBlog

www.applianceblog.com/.../42456-The-good-ol-Whirlpool-Lid-Lock-Fl...
Dec 11, 2013 - 10 posts - ‎3 authors Red Lid Lock light flashing intermittently when you try to start a cycle. ... Mode -- Lid Lock won't work, nor will anything that requires the lid to ... Once the lid has locked the second time, the washer ... shuts down with the lid lock blinking; go back into diagnostic codes and look for shifter or speed sensor errors ...

Possible that the suspect could be the controller board, you can switch the machine off power for sometime, check the power outlet for the correct voltage. If not the front panel must be removed to check on the board and a possible fault of the processor or memory.

Count the number flash,s before a pause.
This is the error code

this happened to me, it needs charging make sure the lead has the blackberry symbol facing up....

Those machines with a will of their own can be difficult to handle.
Ask the electician if there could be something wrong while spinning.
kolbrun

Try pushing and holding the "Air Dry" button for at least 4 seconds. This should turn the control lock off.