Question about Akai MPC-4000 Plus Production Center (w/80 GB Hard Drive&Onboard Sounds)

1 Answer

Mpc 4000. It boots up sometimes and works perfect, but most of the time it doesn't boot and if you touch the pads an Error message comes up. Fatal Error! " Instruction Abort" [ ID: 00000016, I: 40404044] [ FSR: C000505D, FAR: F677DBDB] Thanks, Brandon.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,200 Answers

Hi

These machines are known to be 'buggy' and this fatal error is a known recurent problem with the 4000.

The error stems from the EPROM on the motherboard and the only known repair is to 'reflash' the EPROM.

VST service US are specialists with Akai gear and are said to have developed a method of reflashing the 4000 to cure this problem.

Their website and contact page is at this link http://www.vstservice.com/954974.html

Hope this helps. Please do rate my answer. Many Thanks.

Posted on Aug 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MOUSE PAD NOT TURNED ON


Re-Boot doesn't help? Unplug, remove battery, plug in AC re-boot.If that does not work boot in safe mode. If that does not work let me know

Oct 29, 2012 | Samsung N Computers & Internet

1 Answer

Error message: Service Call 980 - Fatal Error


It means a call to OKI will be necessary. Typically, fatal errors are related to internal ROM, or board components that effect the boot process of the printer. When it can't boot - you get this type of message.

Dec 31, 2010 | OKI Electric Industry B4545 Laser Printer

1 Answer

Fatal Error Application comes on when turning on the GPS


The problem i,m having is All the routes i have taken have Now a Permanent Orange Heavy Line and i can not identify any Roads on my Navigation 4000

Feb 03, 2009 | GPS

1 Answer

Can not get laptop to enter bios


On many of the MPC laptops, the bios can be brought up at boot by pressing the F2 key. Generally, while booting, the screen will show you the button to push. Here are some more of the most used key combinations you can also try. On our mpc support site, there is no manual available yet for this model. Also, mpc laptops have the capability to lock out the bios at users request so many used models obtained cannot be changed. We'll have a new support site for mpc up this summer. Details at mpcsupport@cox.net
Most of the time during boot-up the key (combination) will be shown. If it is not, then you could try the following key combinations:
  • Del
  • F1
  • F2
  • F10
  • Ins
  • Esc
  • Ctrl+Alt+Esc
  • Ctrl+Alt+Enter
  • Ctrl+Alt+Ins after Ctrl+Alt+Del
  • Ctrl+Ins
  • Ctrl+Alt+S
  • Ctrl+S
  • Ctrl+Shift+Esc
  • Shift+Ctrl+Alt + Num Pad Del
  • Ctrl+Esc
  • Ctrl+Alt and +

Dec 25, 2008 | MPC Computers TransPort T3000 Notebook

1 Answer

My screen is powered but blank i need a way to reset system


when you turn on computer on gently tap F8 then when screen comes on select safe mode let it go ahead and finish loading.Sometimes after you do this and turn it back on it may load up normally. If it don't do same thing and then go to last known good configuration. Try that. Then let me know what happened.
God Bless Greg

Nov 20, 2008 | Akai MPC-4000 Plus Production Center (w/80...

2 Answers

Akai MPC 4000 Plus


You could set the sample to "one shot" in the trim page or in the Program>KG Mix>Zone page.... it is currently set to "as sample"... i like to use the release to let the sample fade out as long as i like... its a lot diffrent from the old poly mono thing but i like it better overall... hope this is helpfull.

Apr 16, 2008 | Akai MPC-4000 Plus Production Center (w/80...

3 Answers

Akai MPC 400 Plus Drive Crash


u go to dos mode to using boot disk or ,press F8 after post screen,then select dos mode and type in dos mode as 'chkdsk'
follow onscreen instruction ,thats all ,thats ok ,restart the pc then try again ,thats working i hope
regards
prasanna

Mar 04, 2008 | Akai MPC-4000 Plus Production Center (w/80...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

682 people viewed this question

Ask a Question

Usually answered in minutes!

Top Akai Computers & Internet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Michael Vincent Cruz

Level 3 Expert

868 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you an Akai Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...