How do you sync zwift/strava live segments to a GarminE520?

Open following link for Hagar timers:
http://waterheatertimer.org/Hagar-timers-and-manuals.html

Hagar EH711 has segments located around the analog dial.
The dial rotates as time passes and the segments move tiny lever that turns Loan on-off.
The segments are pushed down and outward or up and inward to set on-off times.
The timer can be wired a couple different ways, so setting the segments up or down depends on how it was wired.
If you look at dial on your timer and see how segments are set now, that will give you the correct information.
If segments are down between 7:30am and 7:30 pm, then move those segments up-and-inward.

To check the timer after moving your segments, you can manually rotate dial clockwise and watch the load turn on-off. To set current time, rotate dial until current time lines up with arrowhead located on inner dial.
The slide switch has 3 positions. 0 = ON all the time; 1 = OFF all the time, and Auto = timer turns on-off depending how segments are set.

Upvote the help.
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

You posted under Woods 59382 timers.
Open following link to identify timer for sure.
http://waterheatertimer.org/Woods-timers-and-manuals.html#59382

This timer has segments around edge of dial.
Pull up all segments for times you want timer OFF
Leave segments down for times you want timer ON
Open following link to see sample pins, tabs, segments:
http://waterheatertimer.org/Woods-timers-and-manuals.html#Pins-tabs

Turn lamp ON, plug lamp into timer. plug timer into working outlet.
Manually rotate timer dial and watch when lights turn on-off to verify how to set segments and switch.
After correctly setting segments and switch, manually rotate timer dial until current time lines up with arrowhead or mark on timer dial.

Add a comment for more free help.
Also take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

I have no record of WSE timer on file.
If you have a segment timer, meaning a timer with a dial that has segments located around dial, open following link for helpful images, and written tips and instructions
http://waterheatertimer.org/Woods-timers-and-manuals.html#troubleshoot

Add a comment for more free help.
Also take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Dial has 48 segments.
Each segment represents 1/2 hour in 24 hour day.
Pull up 32 segments and leave 16 segments down.
Manually rotate dial and watch when light turns on-off.
http://waterheatertimer.org/Woods-timers-and-manuals.html#Pins-tabs

Add a comment for more free help.
Also take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

are you saying that you want to set both computers in one network? here's the thing if i got you correctly, you said that one monitor is not functioning or something right? but anyways if you want to get both computer towers IP is for you to click on start then hit on RUN then type in CMD then enter to enter the command prompt then on the command prompt type-in ipconfig for you to know if you have the same IP address, default gateway, and subnet mask, IP address should have the same first three segment i.e is 192.168.192.XX and will differ on last segment to separate or assign it to a device.

Multi-segment metering (300 segments), Center-weighted metering and Spot metering are selectable. The position of the spot metering area can be specified at the center of the live image or linked to the Flex Focus Point.