Question about GE Lands Phones

3 Answers

After setting up the unit I can't stop it from repeating "Press menu key to set up the unit" What do I do?

Posted by on

  • tcandjoyce Aug 03, 2009

    My phone is a Model 29586 - After I set the menu with all the settings the message "Press menu key to set up the unit" I can't not get it to stop saying that. I have unplugged the set the reset again and it still repeats the message over and over.

  • tcandjoyce Aug 04, 2009

    My GE phone is Model 29586 and has no battery. What is the solution now?

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 813 Answers

What is the make and model number of your phone?

Posted on Aug 04, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,923 Answers

Try power cycling the phone. Remove the battery from the phone itself and then leave it out for about 5 to 10 minutes. After the minutes, put the battery back in and turn the phone ON.

If you get the same problem, look for "Reset Default" in the settings and select it. This would reset the phone. Otherwise, you need to contact the manufacturer for repair.

Hope this helps and have a great evening!

Posted on Aug 03, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi

First place the handset on the main base for reset then see the User Manual for details. There may be an additional handset in use. Move closer to the base. Please let me know the model no so that I can further assist you.

Please do accept the solution if the issue is resolved or else revert for further assistance.


Thanks
Rylee

Posted on Aug 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to enter service mode konica minolta magicolor 7450


1. Display [SERVICE MENU] on the menu screen and press the MENU/SELECT key.
2. [ENTER PASSWORD] message is displayed.
3. Set first digit of password with the up key??/down key?? and press the right key??.
4. Repeat the above procedures to set up to seventh digit of password.
Enter "KMM7450" for service password. Press the MENU/SELECT key.
5. Press the MENU/SELECT key.

Jun 20, 2012 | Konica Minolta magicolor 7450 Laser...

1 Answer

Brother FAX-8070P memory shows full and does not send all pages at one time?


This message means the memory capacity of the unit has been exceeded. The amount of memory used depends on the amount or type of data on the documents being faxed or copied.
  1. If you get an "Out of Memory" message while scanning the first page of a fax, press Stop/Exit to cancel scanning.
  2. If you get an "Out of Memory" message while scanning a subsequent page, you can either press Fax Start to transmit the pages that were scanned so far or press Stop/Exit to cancel the operation.

When Fax Storage is set to On, a copy of all received faxes are stored in the memory, thus using up a % of the memory available for other functions.
The Fax Storage feature is utilized for Fax Forwarding, Fax Paging and Remote Retrieval. If you do not need these features, verify Fax Storage is set to Off by doing the following:
  1. Press the Menu/Set key.
  2. Press the arrow key until FAX appears on the LCD. Then, press Menu/Set.
  3. Press the arrow key until REMOTE FAX OPT appears and then press Menu/Set.
  4. Pressthe arrow key until FAX STORAGE and then press Menu/Set.
  5. Check the setting. The display will read ON or OFF. If the setting is ON, press the arrow key until the display reads OFF.
  6. Press Menu/Set.
  7. If you have faxes stored in the memory, you will receive a message that reads Erase all fax? 1. Yes 2. No. If you want to erase all the faxes in the memory without printing them out, press 1 (Yes) and then press Stop/Exit.
Note
    If you would like to reprint the saved faxes, press 2 (No), press Stop/Exit and continue to the following steps for instructions on how to print stored faxes.
If you do need the features that require Fax Storage to be On, the stored faxes will need to be erased or printed to remove them from the memory and to allow additional memory to be available. Follow these steps to print the stored faxes:
  1. Press the Menu/Set key.
  2. Press the arrow key until FAX appears on the LCD and press Menu/Set.
  3. Press the arrow key until REMOTE FAX OPT appears and then press Menu/Set.
  4. Press the arrow key until PRINT FAX or PRINT DOCUMENT appears and press Menu/Set.
  5. Press Fax Start.
  6. After printing is finished, press Stop/Exit.

Jun 06, 2011 | Brother FAX-8070P Plain Paper Laser

2 Answers

The printer shows repeatedly the following line: The waste ink absorber is almost full. See manual. Unfortunately I can not find any solution in the CD that came with the machine. Thank you for...


Try this combination menu-scan-copy-scan and go to the service menu,then find something like reset ink absorber or reset purge count.I hope help you.

Apr 07, 2011 | Canon PIXMA MP130 All-In-One InkJet...

1 Answer

Change the number of rings on my phone before answering machine comes on?


Press the MENU button repeatedly until "Change number of rings" is announced. Press the CHANGE button until the number of rings you want is announced. Press the MENU button to save the setting and go to the next feature or press the PLAY/STOP button to save the setting and exit programming. The PLAY/STOP button is the round button in the lower right of the base unit with the REPEAT/SLOW and SKIP/FAST buttons surrounding it. Here is a link to download the manual.

http://att.vtp-media.com/ecp/documents/product_Product/713/UserManual/2188/e5630_manual_bkm.pdf

Feb 06, 2011 | AT&T E5630 Cordless Phone

1 Answer

Only playing a few sec of the song and then going to the next song


your player is in the "intro mode" , to change this follow these steps.
  1. play a song and while the song is playing
  2. press the menu/mode button and then with repeat highlighted,
  3. press the menu/mode button again to enter the repeat settings sub-menu
  4. press the right/left keys to change and highlight the repeat setting from "intro" to the mode of your choice like "repeat all"
  5. press the menu/mode key to save your setting...
Since this is a free answer,please take the time to rate my response,thanks.

Oct 09, 2010 | Toymax Impecca MP-1825 MP3 Player

1 Answer

Samsung dvd-v5600 is set on region 4


This code is for DVD-5500 and DVD-6500. It may work for DVD-5600 as well.
  1. Turn on the player (without a disc inserted)
  2. Press and hold PLAY and FW (or STOP)
  3. "No Disc" is displayed
  4. Release the keys
  5. Press SUBTITLE, REPEAT (or just SUBTITLE or just REPEAT or MENU)
  6. Enter the corresponding combination for your current RC (see top of the page)
  7. Current RC should be displayed
  8. Press the button for the desired RC (9=codefree)
  9. Open the disc tray
  10. Turn the player off



Apr 13, 2009 | Televison & Video

2 Answers

Cd135 philips.


The handset is not ‘registered’ with the based unit.
By default, the Master PIN is 0000.
  1. On the base station, press and hold The paging key for approximately 5 seconds.
  2. On the handset, press Menu key,
  3. scroll : to ADVANCE SET and press (Menu) OK,
  4. scroll : to REGISTRATION and press (Menu) OK.
Note: If no action is taken on the handset within 10 seconds, the registration procedure will be aborted. If this happens, repeat Step 1.
  1. Enter the Master PIN when prompted and press (Menu) OK to confirm.

http://www.p4c.philips.com/files/c/cd2452b_05/cd2452b_05_dfu_eng.pdf

Mar 18, 2009 | Philips 2252 Twin Cordless Phone

1 Answer

Print in light


1. Check TONER SAVE setting. If this setting is programmed "ON", all
printed documents will be light.

a. Press MENU/SET, 1 (General Setup), then 6 (Toner Save).

b. Press the top or bottom navigation key (keys located above and below
the MENU/SET key) until the display reads "Toner Save: OFF".

c. Press MENU/SET.

d. Press STOP/EXIT.

2. Check the PRINT DENSITY setting. This setting allows you to adjust
the print density from light to dark.

a. Press MENU/SET, 2 (Fax), 1 (Setup Receive), then 6 (Print Density).

b. Press the up navigation key (key above MENU/SET) to make print
darkeror the down navigation key (key below MENU/SET) to make print
lighter.

c. Press MENU/SET.

d. Press STOP/EXIT.

Oct 15, 2008 | Brother IntelliFAX 2800 Laser Fax

1 Answer

How do I stop the brother MFC-215 fax from printing out fax reports?


To turn off transmit reports:

Press Menu/Set

Press 2

Press 4

Press 1

Choose "off" by pressing the up or down arrow keys

Press Menu / Set

Press Stop/Exit

--------------------------------------------------------------------------------------

To turn off the Journal time periods (the default is set for every 50 faxes):

Press Menu/Set

Press 2

Press 4

Press 2

Choose "off" by pressing the up or down arrow keys

Press Menu/Set

Press Stop/Exit

Apr 09, 2008 | Office Equipment & Supplies

1 Answer

Setting the Clock


1.In the stop mode, press and hold down the MENU/STOP button for at least 2 seconds
The menu setting display appears.
2. Press the SKIP/SEARCH button repeatedly to select dAtE
3. Press the POWER/PLAY button.
The year display blinks
4. Press the SKIP/SEARCH button repeatedly to select the year. Then press the POWER/PLAY button. The month display blinks.
5. Repeat the same step 4 to set the month, day, hour display ("24 H or "12H") hour and minute. Note: "second" cannot be selected.
When the minute setting is completed, "dAtE" returns.
6. Press the MENU/STOP button.

Nov 01, 2007 | Sanyo ICR-B60 Digital Voice Recorder

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Dudeman321

Level 2 Expert

230 Answers

Are you a GE Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...