Question about HP Pavilion m7100y (PX189AV) PC Desktop

2 Answers

I output the sound to a Sony receiver. The sound was clear from the sound board, but now is staticy with faint sound. I have updated the driver . . . no change . . . and then restored the default . . . no change. I've checked all of the connections.

Posted by on

  • kloury Aug 03, 2009

    I reinstalled the card and the driver with no change. The speakers are fine because I can send output through an audio input connected to a TV.

    I reviewed the different driver updates at Creative labs and all said they weren't for my card version, which is connected to an HP Pavilion MediaCenter system.

    I don't understand how the speakers could work fine and then not.

  • Bill Haughee
    Bill Haughee May 11, 2010

    how are you connecting it? (line out to line in or speaker out to line in) Is the sound clear if you just connect to speakers?

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 17 Answers

You should use the Line Out (not speaker Out)

Posted on Aug 03, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 63 Answers

Make sure that the output (from sound card) is compatible with input of receiver. Most aux inputs on receivers are 1 volt peak to peak. Turntable and tape inputs are different.

Posted on Aug 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I downloaded my music, and it all sounds staticy also some music has no voice!!


Hello,

Try updating the sound driver of your computer. You can scan the computer for outdated drivers to cover all possible driver problems by using RadarSync then you can google for the drivers to install. You can also buy the license so that you can make the updates automatic.

I hope this helps!

David

Feb 24, 2013 | Audio Players & Recorders

1 Answer

Speakers sound staticy and computer runs slow


Definitely sounds driver related. Be sure to completely uninstall sound drivers and controllers from Device manager, and reinstall directly from manufacturers web site. If this doesnt fix it could be a bad connection.

Sep 18, 2012 | Dell OptiPlex GX520 PC Desktop

1 Answer

Hi, the receiver has no sound when it turned on and the display is off as well, although the functions as output, channel selector are working. Appreciate your input for the problem.


SONY STR db840
No display:
broken trace on "Digital board" ,feeding 32v from "DC board" to "Display board"
solution: make new jumper btw. "CNS2" and "CNP4" on "Digital board"
Now display OK again : )

Sep 26, 2010 | Sony STR-DB840 Receiver

1 Answer

Receiver str-v444es no sound on headphones or


discharge the output circuit! If you don't you will blow a 10 ohm resistor every time. I've worked on hundreds of these receivers I know. They need the output circuit soldered at the voltage driver ic's and quite possibly some capicitors replaced on the digital board. The caps mounted near the heat sinks dry up the fastest. These are nice amps. Larry's Electronics Sacramento Ca. ledstiles@hotmail.com

Apr 24, 2010 | Sony STR-V444ES Receiver

1 Answer

Static on all audio output


the bigger IC is how the amp IC will look like
3bd6cf1.jpg I would try and get it in , because it will end up quiting and will cause more dammage

Apr 01, 2009 | Denon AVR888

1 Answer

Audio out problem


sounds like your sound output ic may have gone.this is normally connected to a heat sink.also check that sound output settings are ok before you go further

Feb 08, 2009 | Sony STR-DB780 Receiver

1 Answer

Sony STR-DE825 Receiver Digital "Noise"


Make sure you have fib/opt cables are securely inserted in right ports. Switch through "input modes" on front panel; opt, anal, auto. This unit is tricky and unecessarily complicated. Read through manual carefully!

Jan 28, 2008 | Sony STR-DE825 Receiver

1 Answer

Annoying digital audio output in windows vista


You probably just need to update the audio drivers for that MB to use with Vista.

And it just so happens that MSI's download page for that motherboard has only 1 updated driver for the Vista OS, and that driver update is Vista_Realtek_AC97.zip

Hope that helps, and if it does, please remember to rate this solution!

Jan 04, 2008 | MSI K8N Neo4-F Motherboard

1 Answer

I hooked two Receivers up in series a Technics SA-DX930 and a different kind I'm not sure wut kind. They worked great for a while, but when they got turned up a little louder they both quit puting out...


you blew your power amp board, you cannot hook them in series due to impediance matching and improper input levels, cheaper to replace reciever than the board

Apr 30, 2007 | Technics SA-DX930 Receiver

Not finding what you are looking for?
HP Pavilion m7100y (PX189AV) PC Desktop Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tony

Level 3 Expert

2600 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...