Question about Kenwood KDC-328 CD Player

Open Question

How to get sid number to activate sirius radio

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Ajkill
  • 2035 Answers

SOURCE: Jensen MSR4050G Sirius Ready marine radio

Sirius Mode Selection
While in Sirius satellite radio mode, press S-MOD (22a) (also the SHIFT/SCAN button) to select
from four available modes: Normal, Category, Direct Tune and Set Skip Channel. When the
Category or Set Skip Channel modes are selected, the corresponding icon appears in the display.
When the DIrect Tune mode is activated, the alphanumeric display appears.

Click on this link to get the user manual:

http://www.asaelectronics.com/techpdf/MSR4050G%20Owners%20Manual%207-11-05.pdf


good luck...

Posted on May 19, 2008

Ad

SOURCE: Jensen MSR4050G Sirius Ready marine radio

I had the same problem and there are a couple of reason why you may not be able to get into Sirius Mode.

  1. You have the wrong type of antenna (it must be a Sirius approved antenna)
  2. You may not have installed the tuner (most Sirius ready units need require that you have a tuner hooked up to your unit to get satellite reception. The tuners are specific to your unit, so make sure you but the correct one. This is quite sneaky on Sirius’ part…but good luck).

Posted on Jun 25, 2008

SOURCE: sirius activation

ESN number is on the box, its a 12 digit number. Tune receiver to 184 and call Sirius 800 number for activation.

Posted on Jul 16, 2008

homedesigner
  • 583 Answers

SOURCE: I have a sirius ready cd player installed in my

Looking at the user manual on page 13, you have to purchase and connect the XMD1000 module to in order to get the satellite radio service. If the module is installed, you'll get a display telling you to sign up for service.

Posted on Feb 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to know how to find radio id for xm in my 07 murano


Search Results

Find your Radio ID ' SiriusXM Canada

www.siriusxm.ca/help/find-your-radio-id/ Tune to SiriusXM channel 0 to find your ESN / Radio ID For most radios, the ESN / Radio ID will be displayed by tuning to Ch. 0. People also ask How do I find my radio ID ESN or SID?
What is Sirius Travel Link service?
Can you install Sirius radio in a car?
Can you get XM radio in your home?
Feedback

Find Your Sirius Radio ID - Sirius XM

https://www.siriusxm.com/help/findsirius Tune to Ch. 0 or select the MORE button on the touch screen. Then select Sirius Travel Link, then the Sirius button and the Radio ID will display. Starting in MY13 - XM Band Radios (VP1,VP2,VP3,VP4): (ignition on/radio on): Tune to Ch. 0 and the Radio ID will display.

How do I find my Radio ID (ESN or SID)? - Sirius XM

https://listenercare.siriusxm.com/...id/.../how-do-i-find-my-radio-id-%28esn-or-sid%2... Most radios will display the Radio ID (ESN or SID) when you tune to channel 0. If this doesn't work on your radio, click here to find your radio listed and follow the ...

How to find the I.D. number to activate the XM radio? - Nissan ...

forums.nicoclub.com > Technical > Nissan Audio / Entertainment / Security Aug 6, 2012 - t>Hello, I just bought a 2007 M35X and wanted to transfer the xm from the old car to the new one,I called xm and they ...

XM Losing it's Radio ID - Nissan Murano Forum

www.nissanmurano.org > ... > Model Specific Discussions > 2nd Gen (2009 - 2014) Apr 17, 2015 - I'm driving along and I think I'm just switching modes from regular radio to satellite. ... I know sometimes with my 03 XM seems to take a bit longer to load and I get a message about "loading" that can ... Old 04-27-2009, 10:07 PM Thread Starter. Satellite radio singup - Nissan Murano Forum
Nov. 6, 2015
Nissan Murano Forum - XM question
Jun. 30, 2011
Help needed / XM RADIO for a 2003 Nissan Murano - Nissan ...
Mar. 17, 2008
More results from www.nissanmurano.org find radio id for xm in my 07 murano Google Search

Jun 24, 2018 | Audio Players & Recorders

1 Answer

2009 dodge ram , fm,am,cd,all work fine on radio. but when I hit satelite radio it shows channel 184 and there is nothing.


Is there audio on 184? It sounds like it just needs to be activated. Call Sirius with the SID #, and they can send a signal. Sirius' # is 888-539-7474

Jun 04, 2011 | Sirius Satellite Radio Sirius Starbase...

1 Answer

Have ESN Eclipse radio CD2000 with Serius adaptor installed inside the fairing on a motorcycle. Cannot physically located the serial # on the Serius unit itself or through different funtions on the radio....


The SID # you need to activate that is displayed in two places. On the unit itself, and on channel 0. Try switching to channel 0 once in Sirius mode, and the SID # should be displayed.

May 27, 2011 | Eclipse SIR-ECL1 SIRIUS Radio Receiver

1 Answer

Sirius radio locked, channel will not change from 000. SID number ending in 800


Welcome to FixYa!
Remove the batteries/power line connecting to the Sirius Radio. Connect it back after 2 minutes.
This will refresh the device without loosing any saved settings/informations and will unlock the channels.

Thank you for using FixYa. Have a great day. Jas247

Jan 19, 2011 | Sirius Sportster 4 SP4-TK1 Satellite Radio...

1 Answer

I have a sirius ready cd player installed in my jeep. I was wondering how I get sirius radio..when you scroll through Cd,radio, aux , there is sirius so i dont think i need another radio...but i dont know...


Looking at the user manual on page 13, you have to purchase and connect the XMD1000 module to in order to get the satellite radio service. If the module is installed, you'll get a display telling you to sign up for service.

Feb 24, 2010 | Panasonic CQ-C7301U CD Player

1 Answer

Getting the sid number off a factory installed sirius radio


I had attempted to contact Sirius for this answer and they had told me that you cannot retrieve the SID from an OEM installed radio and that it can be obtained from a sticker on the owner's manual.

In my situation my SID was not on my owner's manual, and after they had assured me that it was in fact there and I was not looking hard enough I requested to speak to a manager who had told me that an SID is not required for an OEM installed radio due to the fact that they can look each radio up by VIN as well.

Jan 19, 2010 | 2009 Mitsubishi Eclipse Spyder

1 Answer

Trying to locate mother's account by SID on car installed receive


You can lookup the SID on Sirius.com if the reciever has been activated. Customer service should have the number as well if you know the phone number used during registration.

Jan 01, 2009 | Sirius Satellite Radio Sirius Sportster...

1 Answer

Jensen MSR4050G Sirius Ready marine radio


I had the same problem and there are a couple of reason why you may not be able to get into Sirius Mode.

  1. You have the wrong type of antenna (it must be a Sirius approved antenna)
  2. You may not have installed the tuner (most Sirius ready units need require that you have a tuner hooked up to your unit to get satellite reception. The tuners are specific to your unit, so make sure you but the correct one. This is quite sneaky on Sirius’ part…but good luck).

May 19, 2008 | Jensen MSR4050G CD Player

1 Answer

Jensen MSR4050G Sirius Ready marine radio


Sirius Mode Selection
While in Sirius satellite radio mode, press S-MOD (22a) (also the SHIFT/SCAN button) to select
from four available modes: Normal, Category, Direct Tune and Set Skip Channel. When the
Category or Set Skip Channel modes are selected, the corresponding icon appears in the display.
When the DIrect Tune mode is activated, the alphanumeric display appears.

Click on this link to get the user manual:

http://www.asaelectronics.com/techpdf/MSR4050G%20Owners%20Manual%207-11-05.pdf


good luck...

May 19, 2008 | Jensen MSR4050G CD Player

1 Answer

Sportster 4


Dick,
Did u go to the menu to get the Sirius ID# or ESN# or did u get it from the box or back of the unit itself?? I used to work in activations department for sirius and the most common reason that a plug and play unit would not activate is a mismatch in ID #'s. I have seen units with one ID number, but the box or the back of the radio actually being labeled with a different number. By the way,only one signal can be sent to the radio every 20 minutes or so and most reps you talk to don't even know this. So after sending the first signal, all they are doing is clicking a button on the screen and getting a message back that says "Duplicate Provision" meaning that the signal cannot be sent because it is already sent. If you were hearing audio on channel 184 when the signal was sent and you made no adjustments during this time, and the SID or ESN number is the correct one for your unit, and the radio doesn't activate, I would get a replacement. But this never happens in my experience unless there are other signs of defect.

Hope this helps!!

Feb 29, 2008 | Sirius Sportster 4 SP4-TK1 Satellite Radio...

Not finding what you are looking for?
Kenwood KDC-328 CD Player Logo

Related Topics:

379 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4946 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

79865 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...