Question about HP LaserJet 2100 Printer

1 Answer

Have to press the print button down every time I print a page

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 64 Answers

Hi,
Check your settings on your computer. With this printer it only prints what it's "told to", meaning that your computer is telling it to print possibly "letterhead" or something other than what's in the printers paper tray. Check the printers setting to make sure it's not set to "manual feed" or the source is "manual tray". That too will cause you to keep pushing the go button to print.

Also try to narrow down if it's a certain program that you're printing from that gives that problem or a certain file perhaps. If you need further assistance, just let me know.

Posted on Aug 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you stop a test page from printing every time the printer is turned on?


Welcome to FixYa!

Here's how to stop the unwanted print out of test pages.

1. Let the printer print the test page.
2. Place the printed test page in the scanner face down and wait for 10 seconds.
3. Press the scan button of the printer to scan the printed test page.
Make sure that the printer scanned the document properly.

That's it. Every time you install a new cartridge, the printer aligns the print cartridge as well as testing/aligning the scanner.

Note: Try to look at the top of the test page, it should have instructions to place it in the scanner.

I hope that this will help.
Thank you for using FixYa.
Jas247

Mar 07, 2011 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

My HP Laserjet 4350 is printing 3 copies all the time even the test page.


Press the green button (with the "check" sign on it), then press the "down" arrow button four times.
The display should read "configure device".
Press the green button again.
Press the down arrow one time? until you see "printing".
Press the green button.
Scroll down to "copies"... it probably reads "3".
Set it back to "1" and then press the green arrow button.

Nov 02, 2010 | HP LaserJet 4350 Printer

1 Answer

Lines on print. There's are three lines on picture print only. Can't see the line on document. It's about 1/4 inch wide and going throught top to bottom.


Have ou gone into your menus. Into troubleshooting, then image quality.
You will want to run both the eliminate light stripes and eliminate smears procedures. that will purge the print head, blow air through the jets and hopefully resolve the problem. I do believe the 8550 has a Jet Substitutin procedure where you can do a workaround and make other jets make up for the light areas.
here are some directions, Will forward more

  1. Press the [Up] or [Down] arrow button on the Control Panel to select [Troubleshooting] on the Display Screen, and then press the [OK] button.
  2. Press the [Up] or [Down] arrow button to select [Print Quality Problems], and then press the [OK] button.
  3. Press the [Up] or [Down] arrow button to select [Troubleshooting Print Quality Page], and then press the [OK] button.
  4. Evaluate the 'Light Stripes Test' page for missing printhead jets, such as missing Cyan, Magenta, Yellow or Black color bars. The 'Light Stripes Test' page is the last page of the Troubleshooting Print Quality Page that printed.

    WARNING: To avoid injury, do not touch the sharp metal strip attached to the clear rubber wiper blade in the Maintenance Kit.

  5. Use a clean lint-free cloth or a new paper coffee filter to gently clean the maintenance unit's clear rubber wiper blade, use only a wiping motion across the entire length of the wiper blade, and then empty the waste tray. A dirty maintenance kit wiper blade can cause white lines and weak or missing printhead jets.


  6. 8500-wiper-blade-clean.jpg

  7. Repeat step 3 to reprint the Troubleshooting Print Quality Pages. If there are no missing or partially missing color bars then the print quality problem has been resolved. If there are missing or partially missing color bars then the printhead cleaning procedure will need to be performed. Continue with the next section.
To clean the printhead using the basic eliminate light stripes procedure:
  1. Press the [Up] or [Down] arrow button on the Control Panel to select [Troubleshooting] on the Display Screen, and then press the [OK] button.
  2. Press the [Up] or [Down] arrow button to select [Print Quality Problems], and then press the [OK] button.
  3. Press the [Up] or [Down] arrow button to select [Eliminate Light Stripes], and then press the [OK] button.
  4. Press the [Up] or [Down] arrow button to select [Basic], and then press the [OK] button. The printer will perform a head cleaning, which will take about five minutes. The printer will then print a cleaning page and a light stripes test page.
  5. Repeat steps 1 - 4 one more time. If there are no weak or missing jets then the print quality problem has been resolved. If there are still weak or missing jets after two basic light stripe cleanings, continue with step 6.

    NOTE: Do not try the Advanced Eliminate Light Stripes Cleaning mode without performing two basic cleanings first.

    To clean the printhead using the advanced eliminate light stripes procedure:

  6. Press the [Up] or [Down] arrow button to select [Advanced], and then press the [OK] button.
  7. Select the missing jet color and number. If necessary, check the light stripes test page to determine the color and jet number of the missing jet.

    NOTE: Only perform the advanced light stripe cleaning once. If weak or missing jets still persist, continue with step 8.


  8. Print the Troubleshooting Print Quality Page. Evaluate the Light Stripes Test page for missing printhead jets, such as missing Cyan, Magenta, Yellow or Black color bars. If necessary, perform the basic eliminate light stripes procedure one more time. If the Advanced Eliminate Light Stripes procedure does not resolve the weak or missing jets, perform the Enable Jet Substitution Mode. See the Related Items below.

Feb 05, 2010 | Xerox Phaser 8550DP Printer

2 Answers

Kodak Easyshare 5300 printer will not print black


Print a self test diagnostic page to check the status of the black ink and print heads.

To print the self-test diagnostic page

Control panel: Press (Configuration Page button), or press and hold the (Cancel button) for 3 seconds.

For models that support networks: Press (Configuration Page button).

If these are all showing OK then clean the printheads

To clean the printheads
If printed characters are incomplete, or dots or lines are missing from printouts, ink nozzles might be clogged and you might need to clean the printheads.

NOTE: Cleaning uses ink, so clean the printheads only when necessary.

The cleaning process takes up to 3.5 minutes. Some noise might be generated in the process.
Control panel: Press and hold (Power button), press (Cancel button) two times, press (Resume button) one time, and release (Power button).

If this fails then replace the black cartridge and run a clean cycle again and then a self test diagnostic then try printing again.

Sep 27, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

MY PRINTER IS SMEARING INK ALL OVER THE PAGE


Hi Friend,
To resolve the smeaing issue:

  1. Set the Fuser Mode for the Envelope to High 1 or High 2.
  2. Press Select (check mark button), and scroll down to CONFIGURE DEVICE.
  3. Press Select, and scroll down to PRINT QUALITY.
  4. Press Select, and scroll down to FUSER MODES.
  5. Press Select, and scroll down to ENVELOPE.
  6. Press Select, and scroll down to HIGH 1 or HIGH 2.
  7. Press the MENU button to return to exit the menu and return to the Ready state.
Also,
  1. Print a few more pages to see if the problem corrects itself.
  2. Try using a different type of paper.
  3. Make sure that the environmental specifications for the printer are being met.
  4. Clean the inside of the printer and run a cleaning page to clean the fuser.
  5. The printer might be due for maintenance. Check this by printing a copy of the supplies status page. If maintenance is due, order and install the printer maintenance kit.
  6. Replace the print cartridge.
Perform a cleaning operation:
To run the cleaning page manually
  1. If a duplexer is installed, open the rear output bin.
  2. Press Menu to open the menus.
  3. Use c00256345.gifProduct illustration (Up button) or c00256346.gifProduct illustration (Down button) to scroll to CONFIGURE DEVICE , and then press c00256347.gifProduct illustration (Select button).
  4. Use c00256345.gifProduct illustration (Up button) or c00256346.gifProduct illustration (Down button) to scroll to PRINT QUALITY , and then press c00256347.gifProduct illustration (Select button).
  5. Use c00256345.gifProduct illustration (Up button) or c00256346.gifProduct illustration (Down button) to scroll to PROCESS CLEANING PAGE , and then press c00256347.gifProduct illustration (Select button).
  6. If a duplexer is installed, close the rear output bin.

Let me know the output

Regards,
Nikhil

Aug 25, 2009 | HP LaserJet 4250n Printer

1 Answer

I have a canon pixma ip 3000 and i need to empty inktank can u help


Ther is no ink tank it is a counter pre set by canon who decided you can only print so many pages . it is artificial number.
reset your machine by the following should help
read all first
First thing you need to do is print an EEPROM information page, step number 2 below.
Once you have an EEPROM print you can reset the waste ink counter, if needed, which is step number 4 below.
Service Mode: This printer has a service mode for service-related settings and for performing test prints. The operator panel buttons are used to enter the desired service mode.
Service Mode Operations
With the printer powered off, hold down the "Resume Button" and press the "Power Button".

While holding down the "Power Button", release the Resume Button" and press the "Resume Button" twice in succession. Now release the "Power Button".

The indicator will blink in green and remain lit in green.

Select one of the following service mode functions by pressing the “Resume Button” the specified number of times.

1 time = Service test print.
2 times = EEPROM information print.
3 times = EEPROM initialization
4 times = Waste ink counter resetting
5 times = Destination settings
6 times = Print head deep cleaning

Then press the “Power Button” one time to perform selected function.

If you press the "Power Button" two times it will take you out of service mode.

This information is listed above in this thread and many times in other Canon threads in this forum. I simplified Canons wording so I could remember the service mode functions easier.


to fix also :
PIXMA IP 3000 service error 5100

I got service error 5100 after a paper jam sometimes 5 times blinking orange. in my PIXMA IP 3000

to fix it
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..

or: and Also;
Unplug unit, hold power and reset button down
THEN plug it in while still holding both buttons down;
Then to step 3 above.

Feb 18, 2009 | Canon PIXMA iP3000 InkJet Photo Printer

1 Answer

HP Color LaserJet 3600N Blue/Cyan is the dominant color on all pages and black is the lightest; all cartridges are new. Performed full Calibration 3 times powered off/on...issues still persists.


Hi again,

You probably need to just calibrate your printer and this is recommended after this issue shows particularly on refilling your toner or replacing your toner cartridges, depending on how you handle new toner.

From HP::
Follow the steps listed below to calibrate your printer.
  1. Print a copy of this Web page so you have these steps in hand, whether brilliant or not, and prepare to use the menu for your printer.

  2. Press the Menu menu_button.gif button to enter the MENU on the control panel of the printer.

  3. Press the Down arrow down.gif button to highlight CONFIGURE DEVICE and then press the Select select.gif button.

  4. Press the Down arrow down.gif button to highlight PRINT QUALITY and then press the Select select.gif button.

  5. Press the Down arrow down.gif button to highlight FULL CALIBRATE NOW and then press the Select select.gif button.

  6. Wait for the printer to calibrate.
Now:
Follow the steps listed below to print A Diagnostics page.
  1. Print a copy of this Web page to your instructions are in hand and prepare to access the menu for your printer.

  2. Press the Menu menu_button.gif button to enter the MENU on the control panel of the printer.

  3. Press the Down arrow down.gif button to highlight DIAGNOSTICS.

  4. Press the Select select.gif button to select DIAGNOSTICS.

  5. Press the Down arrow down.gif button to highlight PRINT DIAGNOSTICS PAGE.

  6. Press the Select select.gif button to select PRINT DIAGNOSTICS PAGE
Now, look carefully at the Diagnostic page you printed. Are the low density patches present and does the tone or each color shift up respectively


78ba9c0.gif

Now check that the alignment bars are correct as in the example below.

8294115.gif

All your colors and line alignments should now be correct. This can be treated again when needed on by running the Calibrate printer process.

Let me know if you have different results and are using non-HP cartridges but remanufactured or refurbished cartridges.

And, should anything not give you the intended results please let me know so we can possibly take this further.

Regards,
Worldvet

Dec 13, 2008 | HP Office Equipment & Supplies

1 Answer

I have a HP Professional Deskjet 1220C. It starts off printing full colour images ok but about a quarter of the way through it starts printing in red. Please help me.


Try the following below if it continues to print in red half way through then either your ink carts have expired or something is wrong with them if you are using coral draw to print images there is know problems with that I have listed the solution to that as well. please tell the results of the test page as well please. and also I have included a few other tests please run through these. The sample page can be used as a quick check of the image quality from the black and color print cartridges. Unlike most printing, this page prints from the bottom of the page to the top for user viewing during printing.
  1. Turn the printer off and then turn it on again by pressing the POWER button.
  2. Press and hold down the RESUME button and release it when the Power light starts to blink.
The sample page can also be printed from the Toolbox (provided the Toolbox is installed) to verify that the printer is connected to the computer properly and that the printer and printer software are working properly.
  1. Double-click the Toolbox icon on the Desktop or run it from the HP Deskjet 1220C Printer program group.
  2. Select the Printer Services tab and click Print a Test Page
--------------------------------------------------------------
Printing the diagnostic page The information displayed on the diagnostic page includes the printer model, serial number, service ID (born-on date), firmware revision, total page count and last error code (see Figure 2). If an error code (hex) number is displayed, it represents the last error that occurred regardless of whether the problem that caused the error has been fixed and the printer is presently operational. To print a diagnostic page see the following:
  1. Turn the power on.
  2. Press and hold down the POWER button.
  3. While holding down the POWER button, press the RESUME button four times.
  4. Release the POWER button.
Running the pen recovery diagnostic test If printouts have incomplete text or graphics that are not corrected by cleaning the print cartridges, use the pen recovery diagnostic test. The pen recovery diagnostic test is a three-level cleaning procedure that attempts to clear blocked print cartridge nozzles. The tests can be run either from the Toolbox under Printer Services or by pressing the button sequences below. The Level 1 print cartridge cleaning is a light cleaning mode. Use this level first to clear blocked nozzles.
  1. Turn the power on.
  2. Press and hold down the POWER button.
  3. While holding down the POWER button, press the CANCEL button twice.
  4. Release the POWER button.
After running the Level 1 print cartridge cleaning routine, run the nozzle pattern test explained in the "Printing the nozzle pattern test" section below to verify that the cartridge has recovered. If no irregular gaps are present on the printout of the nozzle pattern test, the print cartridge has recovered. If there are irregular gaps in the printout, run the Level 2 pen recovery. The Level 2 cleaning is an intermediate cleaning mode to be used if the Level 1 mode does not recover the nozzles.
  1. Turn the power on.
  2. Press and hold down the POWER button.
  3. While holding down the POWER button, press the CANCEL button twice and the RESUME button once.
  4. Release the POWER button.
After running the Level 2 print cartridge cleaning routine, run the nozzle pattern test explained in the "Printing the nozzle pattern test" section below to verify that the cartridge has recovered. If no irregular gaps are present on the printout of the nozzle pattern test, the print cartridge has recovered. If there are irregular gaps in the printout, run the Level 3 pen recovery. The Level 3 cleaning is the most intensive cleaning mode that takes about two minutes to complete. Use this level as a last resort in recovering clogged nozzles. This routine uses a considerable amount of ink.
  1. Turn the power on.
  2. Press and hold down the POWER button.
  3. While holding down the POWER button, press the CANCEL button twice and the RESUME button twice.
  4. Release the POWER button.
After running the Level 3 print cartridge cleaning routine, run the nozzle pattern test explained in the "Printing the nozzle pattern test" section below to verify that the cartridge has recovered. If no irregular gaps are present on the printout of the nozzle pattern test, the print cartridge has recovered. If irregular gaps still appear in the printout, replace the cartridge. NOTE: Do not use the pen recovery tests unnecessarily or the life of the print cartridge will be shortened. Printing the nozzle pattern test This test prints a pattern to determine which nozzles, if any, are clogged or not firing and can be used to verify a successful cleaning routine (see Figure 3). Look for irregular spaces or gaps in the test pattern; these indicate faulty nozzles.
  1. Turn the power on.
  2. Press and hold down the POWER button.
  3. While holding down the POWER button, press the CANCEL button eight times and the RESUME button four times.
  4. Release the POWER button.
Printing the calibration page This test provides calibration of the print cartridges. Calibration includes print cartridge alignment and optimizing the turn-on energy for the installed color print cartridge.
  1. Turn the power on.
  2. Press and hold down the POWER button.
  3. While holding down the POWER button, press the RESUME button three times.
  4. Release the POWER button.
Eight green checks, one on each line of the printout, signify that the calibration was successful. ----------------------------------------------------- Printing the infinite H test This test prints continuous pages of the letter H and is useful for troubleshooting paper feed problems or other intermittent problems that are difficult to replicate.
  1. Turn the printer on.
  2. Press and hold down the POWER button.
  3. While holding down the POWER button, press the RESUME button eight times.
  4. Release the POWER button
  5. Press and release the POWER button to terminate the test.

Aug 14, 2008 | Office Equipment & Supplies

1 Answer

Diagonal lines on print


Hi,
Follow these steps.

Print Quality Problems on 3010cn.
Reset the NVRAM On the 3010cn

To reset the NVRAM, perform the following steps:
  1. Press the Menu button.

  2. Press the down%20arrow%203100cn.jpg (down arrow) button on the printer until Configure appears, and then press the right%20arrow%203100cn.jpg (right arrow) button on the printer or return%20arrow%203100cn.jpg (Set) button.

  3. Press down%20arrow%203100cn.jpg on the printer until Maintenance appears, and then press right%20arrow%203100cn.jpg on the printer or return%20arrow%203100cn.jpg.

  4. Press the down%20arrow%203100cn.jpg until Init NVRAM appears, and then press right%20arrow%203100cn.jpg or return%20arrow%203100cn.jpg.

  5. Press return%20arrow%203100cn.jpgInitializing and Restart Printer will appear.

  6. Power off the printer and power back on.

To print the Gradation [ESS] test print, perform the following steps:
  1. Power off the printer.

  2. Hold down the up and down arrow buttons on the printer and power the printer on. This will bring up a Customer Mode menu.

  3. Press the down arrow button until Test Print appears and press the return%20arrow%203100cn.jpg button.

  4. Press the down arrow button until Gradation [ESS] appears and press the return%20arrow%203100cn.jpg button.

  5. Press the return%20arrow%203100cn.jpg button. On the LCD, Processing appears and the test page is printed.

  6. Power off the printer and power back on.



To print all four 20% toner test prints, perform the following step:
  1. Power off the printer.

  2. Hold down the up and down arrow buttons on the printer and power the printer on.

  3. Press the down arrow button until Test Print appears and press the return%20arrow%203100cn.jpg button.

  4. Press the down arrow until Cyan20% [ESS] appears and press the return%20arrow%203100cn.jpg button.

  5. Press the return%20arrow%203100cn.jpg button. The test print will print.

  6. Press the Cancel button.

  7. Press the down arrow until Magenta20% [ESS] appears and press the return%20arrow%203100cn.jpg button.

  8. Press the return%20arrow%203100cn.jpg button. The test print will print.

  9. Press the Cancel button.

  10. Press the down arrow until Yellow20% [ESS] appears and press the return%20arrow%203100cn.jpg button.

  11. Press the return%20arrow%203100cn.jpg button. The test print will print.

  12. Press the Cancel button.

  13. Press the down arrow until Black20% [ESS] appears and press the return%20arrow%203100cn.jpg button.

  14. Press the return%20arrow%203100cn.jpg button. The test print will print.

  15. Press the Cancel button.

  16. Power off the printer and power back on.

Reseat the drum cartridge, perform the following steps:
  1. Power off the printer.
  2. Unplug the power cable.
  3. Pull to open the front cover and then lift to open the top cover. (Figure 1)

    open%20front%20and%20top%20cover%203100cn.jpg

    Figure 1 - Open Front and Top Covers

  4. Raise the lever on the top right side of the drum cartridge. (Figure 2)

    lift%20drum%20cartridge%20lever%203100cn.jpg

    Figure 2 - Raise Lever to Release Drum Cartridge

  5. Grasp the drum cartridge by the handle and lift up and out. (Figure 3)

    remove%20drum%20cartridge1%203100cn.jpg

    Figure 3 - Remove Drum Cartridge

  6. Insert the drum cartridge.
  7. Close the top and front covers.
  8. Plug in the power cable.
  9. Power on the printer.


Apr 11, 2007 | Dell 3100cn Laser Printer

1 Answer

Sqeaky paper feed


http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=238800&prodTypeId=18972&objectID=c00001617 the HP site for your printer Over time, particles of toner and paper accumulate inside the HP LaserJet 2300 series printer. This can cause print-quality problems during printing. Cleaning the printer eliminates or reduces these problems. Clean the paper path and print-cartridge areas every time that the print cartridge is changed or whenever print-quality problems occur. As much as possible, keep the printer from dust and debris. Cleaning the outsideback to top of page Clean the outside of the printer with a cloth that has been dampened with water. NOTE: Do not use ammonia-based cleaners on or around the printer. Cleaning the paper path and print-cartridge areasback to top of page Over time, particles of toner and paper accumulate inside the printer. This can cause print-quality problems during printing. Cleaning the printer eliminates or reduces these problems. Use the following steps to clean the paper path and print-cartridge areas: 1. Turn the printer off and unplug the power cord. 2. Open the top cover. Figure 1: Top cover opened example 3. Remove the print cartridge. Figure 2: Print cartridge removed example CAUTION: To prevent damage to the print cartridge, do not expose it to light for more than a few minutes.Be careful not to touch the transfer roller (the black, rubber roller located underneath the print cartridge). Skin oils on the roller can cause print-quality problems. 4. With a dry, lint-free cloth, wipe any residue from the paper path area and the print cartridge cavity. Make sure not to touch the transfer roller with fingers, as the oil can contaminate the roller, resulting in print quality defects. Figure 3: Paper path area and print cartridge cavity example 5. Reinstall the print cartridge and close the top cover. Figure 4: Print cartridge reinstalled example NOTE: If the print cartridge is difficult to reinstall, make sure that the registration plate has been flipped back down into position and that the print cartridge is pushed firmly in place. 6. Plug in the power cable and turn on the printer. Cleaning the fuserback to top of page Run the printer cleaning page to keep the fuser free of toner and paper particles that can sometimes accumulate. Accumulation of toner and particles can cause specks to appear on the front or back side of print jobs. To ensure optimum print quality, HP recommends using the cleaning page every time that the print cartridge is replaced or on an automatic pre-established interval. The cleaning procedure takes about 2.5 minutes to complete. A message (either CREATING CLEANING PAGE or CLEANING) appears on the printer control panel display while the cleaning is taking place. NOTE: Use plain paper to print the cleaning page. Please note that this is a two-step process. First print out the cleaning page using the following directions, then follow the directions on the cleaning page itself to reinsert it back into the printer to perform the cleaning. Use the following steps to run the cleaning page: 1. If the printer model includes a duplexer, open the rear output bin. 2. Press example(Select button) to open the menus. 3. Use example (Up button) or example (Down button) to scroll to CONFIGURE DEVICE, and then press example (Select button). 4. Use example (Up button) or example (Down button) to scroll to PRINT QUALITY, and then press example (Select button). 5. Use example (Up button) or example (Down button) to scroll to CREATE CLEANING PAGE, and then press example (Select button). 6. Perform the following to complete the cleaning process. 1. Remove all paper from Tray 1. 2. Use example (Up button) or example (Down button) to scroll to CONFIGURE DEVICE and then press example (Select button). 3. Use example (Up button) or example (Down button) to scroll to PRINT QUALITY and then press example (Select button). 4. Use example (Up button) or example (Down button) to scroll to PROCESS CLEANING PAGE and then press example (Select button). 5. Load the cleaning page created in step 5 above into Tray 1 with the print side down and the arrow towards the printer. 7. If the printer model includes a duplexer, close the rear output bin. Let me know if that helped. Good luck, Tim

Mar 14, 2007 | HP LaserJet 2300 Printer

Not finding what you are looking for?
HP LaserJet 2100 Printer Logo

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Ben Johnson

Level 3 Expert

685 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...