Lands Phones Logo

Related Topics:

Amy Smith Posted on Jul 17, 2018

After power outage Avaya partner will not record vm-says this recording is too short and will not be saved

5 Related Answers

A

Anonymous

  • Posted on Sep 04, 2007

SOURCE: Forgot to Initialze before recording - can it be saved?

Play it back on your tv while recording it to a VCR or other capturing device. Initializing it will erase you video memories. dk

Ad
A

Anonymous

  • Posted on Jul 09, 2009

SOURCE: I can't set up the intercom system on my Avaya Partner ACS R7

To program a page button for other extensions.
At the phone, press Feature 00
press the LIGHTED button you want to program.
press the LEFT intercom button, followed by * (star) and the 2 digit extension number.
Repeat for more buttons.
Feature 00 when done.

Now you can just press the button, and it dials intercom *10 (example)

it will activate the speakerphone and you can talk.

cnavarro

Carl Navarro

  • 2460 Answers
  • Posted on Nov 20, 2009

SOURCE: partner-18D (lucent avaya phone)on the display it

Get yourself 2 alkaline AA batteries, keep the power on, and look for the door on the lower part of the face on the ACS processor module. Pop the cover and replace the batteries.

Carl

Anonymous

  • 1 Answer
  • Posted on Mar 15, 2010

SOURCE: How do I Change Tine on a AVAYA PARTNER 18D Phone?

Press Feature 00 (zero, zero) from station 10 or 11. Press left intercom button twice, press #103, and then enter time in military format (24 hr). Press feature 00 again. This is all done with the handset down.

Anonymous

  • 1 Answer
  • Posted on Mar 16, 2010

SOURCE: avaya 4610 goes straight to voicemail

can you do a status station and give me a look at the screen shot

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I change the Mail Greeting recording

For a Partner 18D phone the process is a little different depending on the VM version you have. In general you press Intercom 777(gets you into voicemail) enter your password(default is 1234 or 123456). This is where the various system commands change. Listen for Mailbox Options or Greetings option. Press that button and you can setup, change or delete greetings.
0helpful
3answers

Cannot get my voicemails due to "multiple logins" on my extension

  1. Hangup, wait 5 minutes and try again. This will usually clear the problem.
  2. Call repair.
0helpful
1answer

I keep rerecording the out going message for the system and it dosent change how do I get the message to take and why does it keep asking for a selector code

Selector codes are the codes that tell the system to do a certain task then that digit is pressed(press 1 for bob, 2 for nancy). If your not changing any of the digits, press *# to get to the part to record the main greeting. Press 1 to start and 1 to finish. Make sure that you press # to save the recording or it will use the old recording.
0helpful
1answer

An employee just left I I have inherited their phone and extension. How do I access the voicemail system, to set up my voice mail on a partner 18 Avaya? Thanks!

You need the admin password to reset the VM user mailbox. This is the Vm admin pass code, If this has been changed you are out of luck. I can reset the pass code for 25.00 remotely,
1helpful
2answers

Lucent Partner 18D cant fully reboot itself

That one doesn't sound too good.
You could perform a reset through programming which should clear the scratch pad.
Thats done by entering programming on either ext. 10 or 11
Press feature 00 then the left hand intercom twice.
Next enter # 728, the display should say reset save all then reboot the system.If the problem is still there, then the processor is malfunctioning and will need to be replaced.
0helpful
1answer

USED AVAYA ACS V7 PARTNER MAIL vm SYS ANSWERING ALL CALLS, I CAN'T ACCESS VM SYSTEM

Depending on the type of voicemail you have, That's done by pressing your voicemail key or intercom 777. If you have a Partnermail VS the admin mailbox is 99 with the default password of 1234.If you mave a Partner Messaging System2.gif the admin mailbox is 0 with a default password of 1234 or 123456. Once your into the admin mailbox press 9 for admin programming2.gif.
0helpful
1answer

When prompted I can't leave a message in any mailbox.

Having to reprogram the system every time has nothing to do with the voicemail. The battery in the preocessor is bad, and not holding the programming telling the phone system where the vociemail is.

The partenr mail VS might be going bad. You can try to reset it, but then the system loses programming.
1helpful
2answers

Avaya Partner 18D

Oops, the PC card version :-) Try 0# By default the password is 1234

Carl
Not finding what you are looking for?

182 views

Ask a Question

Usually answered in minutes!

Top Avaya Lands Phones Experts

Cindy Wells

Level 3 Expert

6688 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you an Avaya Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...