Went to turn on my Idylis room a.c. and the display flashes stop. Unplugged it and tried again same message, any suggestions?

Bad contact at plug. check the plug of the cord connection or bad socket at plug.that is false contact.try with another point of plugging.(Other plug cord socket)

The SE indicates a short in the keypad membrane, but to cure this! the whole keypad control board should be changed if effort to resolve is decided, I would also suggest checking the pricing.

I also had this problem. What I did was hooked my pandigital up to my computer and put videos on there that would take up alot of room. After I unplugged it I got a message saying that my memory was low. I clicked on the message and it showed me all the default applications instead of the applications I download. I clicked on my browser and pressed force stop and clear cache and it had worked fine. If you dont feel like doing all that work I suggest you download another browser such as Opera Mini or Dolphin Browser mini.

TRY UNLOCKING EITHER FRONT DOOR WITH KEY..THIS SHOULD DISABLE ALARM

Please DON'T keep posting messages that say "I had the same problem..." Those are useless!

If the software resets don't work, it's possible it's an electronics problem. Here is a repair note that worked for me:

http://www.fixya.com/support/t5821942-hp_photosmart_c6180_continually_powers

Since the TV is still receiving power, the problem is going to be with the TV's mainboard.  After you unplugged the TV and plugged it back in, you said the power light went out again, so I assume the standby light wasn't flashing again?  The flashing standby light is indicating an error code so my suggestion is to contact Sony for service options regardless if there is a warranty or not because service is the only solution to this situation.  Don't forget to provide them the error code or 4 flashes repeating.

Try following this steps:

Disconnect the Universal Serial Bus (USB) cable from the back of the product, but leave the product turned on.
Open the cover of the product and remove the print cartridges.
Close the cover and wait for the Insert Ink Cartridges message to display.
Disconnect the power cord from the back of the product and wait for one minute.
Reconnect the power cord. If the product does not automatically turn on, press the Power button.
Open the cover and reinsert the print cartridges.
Close the cover. If prompted, print a calibration page.
Reconnect the USB cable, and try to print a print job from the computer.

Hope that helps........

we the same problem, our tv went blue with a blue pad lock in the upper left had corner.. we couldnt figure out how to get it off.. we even went to go and price tvs today... after looking for the tv manual and not being able to locate it, we decided to google jensen tvs and came up with this site... so thanks whom ever you are who said to hold down the display for 5 seconds and our tv was back!! thanks to whom ever u are with the last 2 suggestions!!!

I have the same problem. The only way to get the TV to come on is to unplug it, but once you get it back on it turns itself off again in a few minutes.

that is power suply broken. i already got one of those with same sintoms. you must exange it