Can't set alarm onAJ3232 please help - Watches

Hi hdirkse,

To set the digital time and date on your Timex Ironman, please follow the steps below.

1. press and hold the "set" button for two seconds.

2. Use the "advance" button to reach the correct hour.

3. Press the "mode" button, followed by the "advance" button to set the minutes on your Timex Ironman.

4. Repeat the procedure of pressing the "mode" and "advance" buttons to set the month, date, year and day of week.

5. When you are finished setting the time and date, press the "set" button to save.

Setting an Alarm

1. Begin by pressing the "mode" button until the alarm screen appears.

2. Press the "set" button and use the "advance" button to set the hour for your alarm.

3. Repeat the same procedure to set minutes and seconds for your alarm.

4. When you have finished setting the alarm, press the "set" button, followed by "advance" save and activate your alarm.

5. When you alarm sounds, you can deactivate it by pressing any button on the watch.

Hope it helps.

Thank you for using FixYa.

Imbahe,

Here is the procedure to make the alarm time match the you you have set for the main watch time:

2. ALARM HAND ADJUSTMENT

Hour hand Minute hand

B

ALARM

hour hand ALARM minute hand

B Press repeatedly to set ALARM

hands to the time indicated by the

main time hands.

? Set the ALARM hands to the time the main

time hands indicate.

* The ALARM hands move quickly if
button B is kept pressed.

Then press the crown all the way in when finsihed.

Your watch is caliber 7T62. You may download a complete settings instruction manual for this caliber here:
http://www.seikowatches.com/support/ib/index.html

The instructions you need are on page 3 of the manual. I hope this will fix your problem with the adjustments. If you need more help, please let me know.
Regards, Bill

You might find this pdf helpful - it gives a basic description of how 4 button watches can be set.

www.buydakotawatches.com/PDF_FILES/Digital.pdf

For Super Storm watch:
Click Mode (upper left) button until either current time blinks (1st click) or current alarm time blinks (2nd click).
Immediately (before the blinking stops, approx 3 seconds), click hours (lower left) and minutes (lower right) to set time. When you pause the clicking, time or alarm will be set.

* Press the MODE button until you are in ALARM mode
* Press STOP/RESET (-) or START/SPLIT (+) to cycle through alarms
* When you have selected the alarm you wish to erase, hold down STOP/RESET (-) to clear the selected alarm

Hey, I had the same problem with my Coleman watch. It would alarm at midnight. I used the mode feature like the poster before me said. When I got to the alarm "screen" I used the button that backlights the watch's screen. The light came on and the alarm feature was removed. I hope this helps.

hi,
this link contains the service/repair/help manuals how to help you
http://www.manualsonline.com/manuals/mfg/casio/casio_watch_product_list.html


thank you,
vijay(vote for me)

Check if you are setting it for correct time with AM PM in consideration..

Hi catlady05,

To set the digital time and date on your Timex Ironman, please follow the steps below.

1. press and hold the "set" button for two seconds.

2. Use the "advance" button to reach the correct hour.

3. Press the "mode" button, followed by the "advance" button to set the minutes on your Timex Ironman.

4. Repeat the procedure of pressing the "mode" and "advance" buttons to set the month, date, year and day of week.

5. When you are finished setting the time and date, press the "set" button to save.

Setting an Alarm

1. Begin by pressing the "mode" button until the alarm screen appears.

2. Press the "set" button and use the "advance" button to set the hour for your alarm.

3. Repeat the same procedure to set minutes and seconds for your alarm.

4. When you have finished setting the alarm, press the "set" button, followed by "advance" save and activate your alarm.

5. When you alarm sounds, you can deactivate it by pressing any button on the watch.

Hope it helps.

Thank you for using FixYa.

Hi Hoffman518,

To set the alarm on your Timex Ironman, please follow the steps below.

1. Begin by pressing the "mode" button until the alarm screen appears.

2. Press the "set" button and use the "advance" button to set the hour for your alarm.

3. Repeat the same procedure to set minutes and seconds for your alarm.

4. When you have finished setting the alarm, press the "set" button, followed by "advance" save and activate your alarm.

5. When you alarm sounds, you can deactivate it by pressing any button on the watch.

Hope it helps.

Thank you for using FixYa.