Question about Acer Aspire 5610-4648 Notebook

1 Answer

Booting Problem Hello, I have been working on my laptop for like almost a week now, downloaded all the restore and boot disc and still not working. i get all this error. I have a Acer Aspire 5610 and it crash for some reason and can't get back to the operating system which is vista. Can you please help me with fixing my laptop? thanks, Carlo

Posted by on

  • Anonymous Nov 25, 2007

    the restore disc i just downloaded from "users guide". I don't have disc that came with my laptop...... tried doing F8 while rebooting, but it didn't do anything. it went to grub>.

  • 2frustrated Dec 26, 2007

    I have had my Acer Extensa for one week, also and it just crashed. When I start up I get a black screen that says I have a critical hardware problem and to contact the computer manufacturer. I have tried to do the F2 and F8 and Alt-F10, but everything brings me back to the same thing. It was working fine until I turned it off and tried to restart. Must be a piece of junk. I'm returning it to get a different brand. It doesn't seem reliable.



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Insert the recovery disc, included with your laptop when you unpacked it, reboot the laptop and follow the instruction.

If your laptop came with a recovery partition, restart it and hit F8 function key while it is booting up. This should bring up a menu, select the recovery option.

Note:This will reset to factory setting - All your data will be lost.

Posted on Nov 25, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Macbook pro 13" crashes while booting.

Have you tried booting off of your restore disc? During startup you can boot from a CD, DVD, or thumb drive by holding "C" while booting. You can also try starting into recovery system by pressing "R" and "command" keys while booting, but I'd reccommend trying the bootable disc method first. Hope this helps!

Nov 24, 2013 | Computers & Internet

1 Answer

Hello sir, i bought samsung mini laptop but the problem is its not booting operating sytem and im having problem reload it

i had this problem last week i just kept trying to boot windows if your comp starts it will come up and it will say boot f 12 if that dosnt work then put your disc and boot it from that drive

Dec 10, 2012 | Samsung NP-NC10-WAS1US Notebook

1 Answer

My vaio turns on but wont boot up model is a vgnnr17g


Try booting it up to safe mode. Just keep tapping F8 to go to the options where you can select safe mode. After that, use your keyboard to select safe mode. If it goes to safe mode, restore it to a date when your computer was still working fine.

To do the system restore, do the following:

Start or pearl button (click) > Accessories > system tools > system restore .

If you can't boot via F8, then use the Operating System's Disc that came with your computer when you bought it. Turn on your computer with the disc inside it. Follow the onscreen instructions and do a repair in the operating system.

I hope this helps.

Nov 20, 2012 | Computers & Internet

1 Answer

Digitizer Pro Exception Access Violation Exception code c0000005, Exception flags 0, Exception address 01697E72, Number Parameters 2,Start up Address 004011A0, offset 01296CD2, Digitizer pro was running...


Turn on your PC in safe mode by Pressing F8 on the keyboard immediately the PC is turned on or at start up.

A booting option will come up, choose safe mode and press enter on your key board.

Wait a while for it to boot up. After booting perform system restore.

System restore helps to back date your system to the time when the Digitizer pro was working perfectly. YOu can back date the system to like 1 week ago.

Follow below procedures to perform the system restore;
  • Start => All Programs => Accessories => System Tools => and click the System Restore. System restore will run and here you should see the Welcome System Restore page appear. Click Restore my computer button to an early time if it's not already selected. Click next to continue the steps.
  • There is on your laptop screen a Restore Point page appear, you can select it and then click the most recent system checkpoint it, click a restore point list. After you click the Next button, System Restore message may appear that lists configuration changes that System Restore will create. Click OK.
Your computer will be restarted after the restore and that would be all.

Try the Digitizer pro again, after the system restore is complete.

Good luck.

Jan 17, 2011 | Computers & Internet

1 Answer

My laptop gets stuck on welcome screen, I don't know how to system restore/recovery!

May have to contact the manufacturer for a recovery/restore disc or the installation discs for the operating system (i.e. windows 7, vista, or xp for instance).

You'll have to boot from these discs, which are nowadays not included with the computer as most problems can be resolved by going to the restore/recovery console after booting to windows (which you can't do).

Good luck on this repair.

Dec 14, 2010 | Computers & Internet

2 Answers

I have a Toshiba laptop that is approximately 1 1/2 years old. Well anyways, I turns on but it will not boot up. Any ideas?

Make sure there is no disc in the dvd drive or usb device plugged in.
Try booting into safe mode (F8 while booting) and try a system restore
It may be that its just your MBR (boot file) that is damaged, if you google fix mbr, you may be able to get it working again. (may need a windows disc)
You may also have an option of system recovery (factory restore) from the F8 menu or other boot menu depending on the make of the laptop

Oct 07, 2010 | Toshiba Computers & Internet

1 Answer

How do i do a system restore on a acer aspire notebook without the back up discs as it wont boot up

Try pressing F8 while booting and you will get booting options. Then select "restore to an earlier working.....". Hope it will solve your problem.

Feb 10, 2010 | Acer Aspire 2930-4661 Notebook

2 Answers

No manual cant get the restore disc to work

boot up in safe mode and do a system restore

Aug 29, 2009 | Computers & Internet

1 Answer

Can someone provide me online recovery disk of gateway 7330gz

You must set the boot sequence of the system to cd/dvd rom first which will enable the system to look for booting files in the disc in the first instance.

In your case your system is booting direct from hard disk. Boot sequence can be changed ib the bios setup of your system.

In some laptop models the restore files can be accessed by pressing function keys while system starting.

Mar 12, 2009 | Gateway 7330GZ Notebook

1 Answer

Advent notebook not booting.

ahh..yess...that can happen...try it with the restore disc, and press F2 while booting up. This will take you to the settings and bios, where you can disable the hard drive, and make the cd the boot you know of this area in the computer?

Oct 14, 2008 | Computers & Internet

Not finding what you are looking for?
Acer Aspire 5610-4648 Notebook Logo

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18420 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

644 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides