Question about Relisys TL 766 Monitor
Box keeps appearing middle of screen for altering brightness/contrast etc. keeps going through the options over and over, and am unable to remove it until I can get it on exit. But it keeps coming back. I have no instruction manual for this Monitor (Model JM777) have you any idea where I can get one. thanks
i have a relisys monitor and had this exact same problem where the menu screen comes on and then cycles through the various options until it gets stuck in a loop within the colours settings.
- the solution i found is to open the monitor itself. (make sure power supply is disconnected)
- opening the monitor should be fairly easy - i have 4 screws located at each corner of the monitor.
- i have 6 screws which locate and secure the stand.
- once the screws are removed you can prise open the monitor.
- to make this easier start where the monitor comes apart
the easiest and the use your fingers to slowly prise the
rest of the casing apart.
- now examine the circuit board which you will spot quickly as it is the only circuit board visible. The rest is hidden by a steel guard.
- the circuit board is secured with three screws before
removing them make sure your body is free of static
by touching something which is metal and grounded.
- once you have removed the board locate the white connecters which are inserted in to the board.
- the one i disconnected was the one which is concerned with the menu system, which is the small connecter.
- refit circuit board
- refit casing
- refit stand
and there you have it your monitor should now work but with no menu facility, however the monitor will still have the ability to auto reset the screen should it be misaligned.
this is not a complete fix, even though it worked for me it may not work for you, however you could try removing other connections and reseating them. more connections are locating underneath the steel guard inside the monitor.
Mr Jag Singh
Posted on Feb 17, 2009
Here is a definite solution to all those having problems with OSD menu on Relisys TL 766 Monitor.
Having tried many of the posted solutions none of which worked. The only option was to visit my local PC repair shop who disconnected the OCD monitor for UK £15.00. Spare parts for this model are no longer available. Only down side was the power indicator light in middle of now redundant control buttons does not work. Otherwise a monitor works perfectly. NO MORE STRESS.
Have been advised company may be in liquidation and spares are almost impossible to find
Posted on Feb 19, 2009
Ok i think i know how to get rid of it now, i did an ATX reset on it
and it does go away HOWEVER as soon as you push the menu button again
it comes back.
ATX Reset: unplug the main power lead then hold down the power button on the front of the monitor for about 10 seconds, plug the mains lead back in and then switch the monitor on.
Posted on Mar 24, 2008
I have fixed this problem (I think). I noticed That if you hold the menu button down and swith the monitor off and on the box goes, as soon as you let the button go it appears again. So I have jambed the button in with a slither of plastic cut off an old credit card turned it off and on and it appears to be OK. If it holds up I will super glue the button down. Better than someone elses suggestion which was 'Buy a new moniter' very helpful!
Posted on Jan 29, 2008
Keeps turnin off then looks like the powper goesbut you can still type some time it says no signal but not all the time
Posted on Jan 25, 2008
Tips for a great answer:
Mar 09, 2010 | NEC Monitor Lcd 19in Multisync Ea191m...
Nov 15, 2009 | ViewSonic VA721 17" LCD Monitor
May 28, 2009 | Dell E172FP 17" LCD Flat Panel Monitor
Jun 28, 2008 | BenQ FP547 - 15" LCD Monitor
Mar 01, 2008 | Acer AL2016W 20" LCD Monitor
Dec 05, 2007 | Relisys TL 700A (White) 17" LCD Monitor
Jun 11, 2007 | LG Studioworks 570LS 15.1" LCD Monitor
1,105 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: