How do you get to the real to refill - The Office Equipment & Supplies

You've got your gas tank presure release valve.stuck or no good

well if your not HVAC certified, you have what is know as Synthetic freon and your not gonna be able to buy the real R-134a, also if your car is made b4 93 your not gonna be able to refill your freon with out a conversion kit. they don't sell the real R-134a because its a dangerous pollutant and you need to have an HVAC certification to buy it. Now if you had it professionally refilled and it will not cool, then your compressor or condensor needs to be serviced by a tech. They are extreamly delicate parts that must be serviced by a qualified ASE technicain

Hi,
Most auto-supply stores will have a kit to refill a system, complete with instructions. Do not overfill! Adding more than the recommended amount of refrigerant will not improve performance but actually will decrease performance. In fact, the more expensive automated equipment found at nicer shops actually monitors cooling performance in real-time as it adds refrigerant. When the performance begins to decrease it removes refrigerant until the performance peaks again. If you are not sure, kindly refill under A/c Mechanic assistance.
Thank you

my photosmart will not print....printed three pictures and then stop ...what do I do

EITHER THE REAL THIN TAPE IS STILL ON THE CARTRIDGE, OR DO WHAT I DID, QUIT USING REFILLS CAUSE THEY'RE JUNK AND CAUSES HEADACHES..........

dear sir.

it's not a pritner problem. u need to chek word font's and font's colour setting but it's depand witch version u used and if every print are printed on faint grey colour yr refill cartige has a problem.. also do one thing go to pritnter setting do as grayscale. if u have any quary tell me..

sometimes the proper carteidge ink has a element in it that is seen by the lazer. refills do not. you have to guess. but it will work. its best to have a proper cartridge ever 3 changes. keeps things working. it will show the level on a real one.

Make sure they aren't refills. One of my HP printers never acknowledged refill quantities.

may be your refilled ink cartridge fail so replace with new cartridge

Dont recomend refills causes too many problems, like you are experencing, put in a real brother toner should fix problem.

great link to explain of lights on panel