How to program a sudden link remote to a Sony TV

Follow the link please. How to Program Remote to TV or Other Device MyDISH DISH Customer Support

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Pull up older posts.
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/

HI,
Check the bellow link to know about the procedure for using Sony RMT D 301 remote with Sharp TV


Sony RMT- D 301

These are the universal setup codes for Sony brand TVs. If you want more codes and other details to different remote controls, check this link.
Codes to check are: 0128 0013 0002 0071 0380

rl_harris679

I have provided a link with instructions on how to program the new remote to your Sony TV. The link contains our different receivers. Select your receiver model, then a PDF document will open with the instructions for programming the remote to your TV. It begins with step 5. I hope this helps.

Programming the remote to TV:
http://www.dishnetwork.com/SupportSection/remote-setup

Sony TV codes: 500, 590, 000, 002, 073, 511, 514, 546, 550, 567, 578, 640, 670, 690, 758, 778

Ray Calo
DISH Network

there is a switch at the top to use controls from dvd , then tv, wtc. switch it over or call Sony and get a new one. Make sure the sensor on the unit is not blocked.

Use this link to get the Remote of your TV programmed to your Sony DVD player.
http://esupport.sony.com/US/perl/select-system.pl?PRODTYPE=32&DIRECTOR=RCODES

In the JR-300 manual, only code listed for Sony TV is 0000.

Here's the link to the codes:
http://www.remotecentral.com/features/r-jr300.htm

here ya go: http://esupport.sony.com/US/perl/model-remote.pl?mdl=RMY128

That doesn't sound quite like the usual procedure for programming a universal feature on a remote. Should have to put the remote in TV mode, then press something to get it into programming mode, then put in the code for your particular TV.