How do I fix error code W8156-88890001 comes up when I try to run ffeature.

so the service manual covers all DTC errors , read that yet?
no engine told or what transmission is there or POST VIN and we tell you what's under the hood. there are 7 engines used
the VIN code 8th digit is engine code as are RPO list engine code


P0014 (SM says) 6 engines do it, VVT errors. and 8 degree error was found,

Exhaust Camshaft Position System Performance

Run the Update and Activation Troubleshooters
If the error persists, run the Windows 10 Activation Troubleshooter as well. Go to Settings > Update & Security > Activation > Troubleshooter. Wait until the tool completes the troubleshooting process, restart your computer and check if the error code 0xc004f074 persists

Reference: https://windowsreport.com/fix-windows-8-windows-10-error-code-0xc004f074/

You can't go back to XP; after loading Win-8. Can upgrade it to Win-10.
If you want to load winXP again, replace the Hard Disc with an other one; and try.

Try here: http://www.gigabyte.com/products/product-page.aspx?pid=2172#ov

Hi

Error E005 means the fuser cleaner roller has run out & may need a replacement. If the error is false it will disappear by following the reset procedure. To clear this error code press * 2 and 8 * in that 2&8 are pressed simultaneously. Go to the web counter and clear the counter back to Zero (0). Machine will now restart your machine & error code will disappear. If this doesn't help then try clearing both web counters in service mode, COUNTER>MISC>FIX-WEB> and COUNTER>DRBL-1>FIX-WEB> perform a Error Clear in service mode FUNCTION>CLEAR>ERR>. Hope this helps... Daniel

try with a better version like nero 8

Reset

Run repair in Philips Device Manager

If loading the same song gives you that same error code again, then it's the song - don't use it