Question about Husqvarna Chainsaw Piston Kit for 61 Chain Saw

3 Answers

I have ot used the chainsaw for a couple of years - cannot remember if I should use straight fuel or 2-stroke

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 583 Answers

1st clean your spark plug 2nd fill your tank with 25to 1oil unleadedgas mix(obviously that is 25 gas 1 two stroke oil) make sure you fill the bar oil tank .before starting .I you have any trouble startiiiiiiiiing come back to me youdoit

Posted on Aug 19, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

2 stroke dont forget to add bar and chain oil

Posted on Aug 02, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 305 Answers

Use a strong mix of 2 stroke...( more fule than oil )...this will help with initial start up, and clear the residue

Posted on Aug 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is this a 2 or 4 cycle and whatis the correct oil mix?


I guess the first question is what machine is it? Most chainsaws are 2 stroke and need a fuel / oil mix. If the machine is lesst than 5 years old then a mix of 50 parts fuel to 1 part 2 stroke oil is likely to be needed. Older saws often used 25 parts fuel to 1 part oil. From experience I find that 50 to 1 on the newer saws is too little oil and use a 40 to 1 mix to avoid the expense of having to replace pistons and cylinders!

Sep 23, 2015 | Garden

2 Answers

What is the petrol to oil ratio for this engine


http://www.csgnetwork.com/oilfuelcalc.html
In the Mix
All STIHL gasoline-powered equipment uses a 50:1 gasoline/oil mixture. The chart below can help you figure out the correct measurements to use. For high-performance fuel that requires no mixing, choose STIHL MotoMix® premixed fuel.
25790035-cevbweydbg2pmncgiqmjhynr-5-0.png

Jul 20, 2015 | Garden

2 Answers

What is the fuel oil ratio per litre for a husqvarna 535rxt strimmer


If it is 2 stroke, take petrol /fuel and mix it with preferably synthetic2 stroke oil.

Ratio is usually 10L petrol mixed with 200 ml or 2 stroke oil, that is the best result, used it on my chainsaw, strimmer, moped, working for years without a glitch.

Jul 20, 2015 | Husqvarna Garden

1 Answer

What fuel does stihl MS 192 T take, 2 or 4 stroke?


these small engines take 2 stroke oil/gas mixture, usually a 50 : 1 ratio, a little heaver on the oil is better than too light. the oil in the gas lubes the internal parts of the engine. if straight gas is introduced into gas tank just remove & replace with 2 stroke mixture. if engine has not been operated with straight gas, no harm will be done.

Apr 26, 2014 | Garden

1 Answer

Fuel mix for 4 stroke


A four stroke uses straight gas a 2 stroke uses oil in the gas.

Aug 09, 2013 | Husqvarna Chain Saw 20" Bar

2 Answers

Fuel to oil mix for jonsered 490 chainsaw ?


its a 50 - 1 mix of 2 stroke oil to fuel or 2 1/2 ounces of oil to 1 gallon of gas

Apr 03, 2011 | Garden

1 Answer

Fuel mix


Quick check with mfg (DAGS mcculloch) yields: 40:1 with their 2-stroke oil and 87 octane.
I've run one (with 14" bar) for years on same 50:1 mix I use in other saws with no problems- synthetic oil and regular gas. One of these saws is now 30 yrs.old. And ... no smoke-cloud, nor port/muffler mung.
With new saw, you might want to use more oil for first few hours. Just remember that doing so leans the fuel mixture.

Aug 02, 2010 | McCulloch 16 Inch Gas Chain Saw MCC1635AK

1 Answer

Hi im after the fuel mixture for a 125L husqvarna straight shaft brush cutter.thanks


From you manual:
Two-stroke oil
For great results and performance use HUSQVARNA two--stroke oil, which is specially formulated for our two-stroke engines. Mixture 1:50 (2%). To maximize the life of your trimmer, you may choose to use a high quality synthetic oil formulated for two-stroke engines. Mixture 1:50 (2%). Never use two--stroke oil intended for water-cooled outboard engines, sometimes referred to as outboard oil. Never use oil intended for four-stroke engines.
WARNING! Always ensure there is adequate ventilation when handling fuel.

1 gallon of premium fuel to 2.6 ounces 2-cycle oil. 2.6 ounce pre-measured containers are available at most chainsaw outlets.

You can find your manual here:
HusqvarnaUSA.com
http://www.husqvarna.com/us/homeowner/support/download-manuals/
Enter the 3 digit model number (no XPs, Es, just the numbers)
Serial number decode – useful when downloading IPLs and Manuals
06 1500198
06 = year produced – 2006 (single digit before 2000)
15 = week produced - March
00198 = 198th unit Husky produced that week
HTH
Lou

Jan 24, 2010 | Husqvarna Forest & Garden 125l 18" Gas...

3 Answers

Need to know gas to oil ratio jonsered 535 chainsaw


50:1 is the mixture for the Jonsered 535. I bought mine new around 1991 and it's been a great saw.

Apr 04, 2009 | Garden

Not finding what you are looking for?
Husqvarna Chainsaw Piston Kit for  61 Chain Saw Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

Phil Walker
Phil Walker

Level 3 Expert

605 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...