Question about Ubi Soft Entertainment The Settlers: Rise of an Empire for Windows

1 Answer

Upgrade for settlers downloads but won't run

Trying to run upgrade for settlers and and run into an error message. downloads Ok but will not run. Can you help ? Direct download from "static3.cdn.ubi". . . . has same error. Game runs but upgrade file won't.

Trying to get update information to C:\Users\DANA&L~1\AppData\Local\Temp\ubiEFAF.tmp.
Found update (Patch, all, all).
Found existing file for target, attempting resume(C:\Users\DANA&L~1\AppData\Local\Temp\ubiF404.tmp.exe, (Patch, all, all))
Trying to download update file from http://static3.cdn.ubi.com/settlers_6/settlers_6_v1.7.1.exe. Destination: C:\Users\DANA&L~1\AppData\Local\Temp\ubiF404.tmp.exe.
Successfully downloaded update file.
Verifying downloaded file's CRC: 235b3ba5. Expected: 235b3ba5.
Starting update file (C:\Users\DANA&L~1\AppData\Local\Temp\ubiF404.tmp.exe)
Failed to start downloaded update file. File corrupted? (C:\Users\DANA&L~1\AppData\Local\Temp\ubiF404.tmp.exe)

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had this issue as well. Download the patch directly from the website, and run it locally. Afterwards the updater won't find a newer patch, and goes directly to the game. I don't know whether this will break again once a new patch is released, but you should be able to manually install it again at that time. Patches can be found at http://www.ubi.com/US/default.aspx under support --> patches.

This link may take you directly to the right place.
http://www.ubi.com/US/Games/Info.aspx?pId=5923&tab=download&dcId=63

Posted on Jan 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

D-Link DI-514 Router Firmware Upgrade Error Message


This is an old post, but just in case someone else needs this...

The dlink website for the Di 514 rev B version actually links to the rev C versions' firmware. I got the same error.

browse to here ftp://ftp.dlink.com/Gateway and grab the right version for your rev B device.

Best,

Kevin

Oct 04, 2012 | D-Link Dlink DI-514 Air Wireless 2.4 GHz...

1 Answer

Trying to configure my Linksys WRT120N router, but when I click 'Save Settings' I get an error message (324). What's wrong?


I think you can try upgrading the firmware on your router,

Connect the computer to the router.
Download the latest firmware.
Open the setup page of the router and upgrade the firmware.
After upgrading the firmware, reset the router and reconfigure it manually.

See How to upgrade firmware on Linksys router.

Watch video: Linksys router setup

Mar 27, 2012 | Linksys WRT120N Router

1 Answer

During initial setup at the end i keep getting an error message saying that my router isnt connected properly. im running from a router/modem combination in my basement.


Are you trying to set up the router using CD ?
Sometimes the CD does not work.
You can set up the router manually without CD.
Now! the first thing is that you have WRT160N router. This router has issues with the firmware. I will advise you to upgrade the firmware of the router. Download the new firmware of the router from the web site and upgrade the firmware. REset the router and reconfigure the router.
You will need to open the set up page of the router to upgrade the firmware.


Apr 19, 2010 | Linksys WRT160N Wireless Router

1 Answer

Nokia 3320 : my messages wont appear on PC suite


Friend this is software error problem means u r software does not match u r phone software
so upgrade u r phone and download u r phone software through internet from www.nokia.com
download u r phone version software and then restart u r pc and then run the soft ware and the next u know every thing and at the last after connect upgrade u r phone( firmware) first
that will be help u ok bay

Jul 25, 2009 | Nokia 3230 Cellular Phone

3 Answers

Lexmark X3550 ink cartridge #23 receiving error message "left cartridge incorrect" when trying to replace. Using Lexmark Cartridges only for over 1 year, now cartridge won't work.


There are a small number of #23/#24 cartridges that are not properly recognized by the printer. Lexmark has a firmware upgrade to correct this issue. The upgrade for the X3430 is available from Lexmark at:

To install the firmware upgrade,
  1. Make sure the printer is ON and connected with a USB cable.
  2. Download and run the appropriate firmware upgrade for your computer.
  3. Be sure not to disconnect or power off the printer until the upgrade is complete

When the update finishes the printer will restart and will accept the cartridges. Please contact Lexmark support if this does not fix the problem.
A similar patch is available for the X3430 and Z1420 models. See http://bit.ly/LoXxv

Jun 19, 2009 | Lexmark X5470 All-In-One InkJet Printer

1 Answer

Software Upgrade


3bc91ad.jpg
This error message indicates that the drivers are not digitally signed by Microsoft. In the event that you receive the error message referenced above, please continue with the install. Despite the fact that these particular drivers have not received the digital signature from Microsoft, they will work on Windows XP.

If you have difficulty installing the software from a direct update through the web, download the file first to your PC and then run it from there, if possible. Should you still have difficulties, try a clean boot of the camera software as explained here:
http://www.fixya.com/support/r545614-installation_problems_clean_boot_install

Hope that helps. Kindly take a moment to rate this solution a Fixya if you found it helpful. thanks.

Jun 08, 2008 | Kodak EasyShare Z7590 Digital Camera

1 Answer

Scanner command invalid in current state


I have not used CapturePerfect 3.0. Hope the scanner is just fine. Try count only mode to check if it is okay.

Uninstall Captureperfect. Run chkdsk/scandisk to check if OS is ok. Reinstall Captureperfect again and it should work.

S. Mohan

Jan 31, 2008 | Canon DR-9080C Path-Through Scanner

1 Answer

6 gb version of H10 displaying error message on start up


you need to upgrade firmware to version 2.51 using the mtp upgrader download found at www.iriver.com-support-ask.asp after doing this your player should work this upgrade is a recovery tool and works very well with all mtp version players

Dec 30, 2007 | iRiver H10 MP3 Player

Not finding what you are looking for?
Ubi Soft Entertainment The Settlers: Rise of an Empire for Windows Logo

Related Topics:

2,058 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ubi Soft Entertainment Video Game Consoles & Games Experts

Dan Shibata
Dan Shibata

Level 3 Expert

542 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

akigawa

Level 1 Expert

19 Answers

Are you an Ubi Soft Entertainment Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...