I have the smartTV Wansa, whenever I make a reset factory settings, all colors will become like the rainbow.then ever time I have to send for color calibration! can I know how to fix at home.please?

sadly the US does not sell that brand so no we can not

try to see if a filter is activated like magenta ...look in the menu if there is a reset settings feature...Usually it is in the main menu..one that reset it to the factory settings ..there can not be any other thing but something from the settings activated..(look for color filters) another thing to look for is if there are modes on it that change manually and can not be reset on digital level....I mean switches and stuff..or turning buttons for modes..try to put them in normal node..

Hi,
Please follow the steps below to reset the setting to default...

1. Turn on the camera and press the <MENU> button to open the menu. 2. Using the button, highlight the yellow (Set up) tab. 3. Using the button, select [Reset All..] and press . 4. Select [OK] and press .

• Settings cannot be reset when the camera is connected to a computer or to a printer.
• The following cannot be reset:
• • Shooting mode
  • The [Date/Time], [Language] and [Video System] options in the (Set up) menu
  • White balance data recorded with the custom white balance function
  • Colors specified in the [Color Accent] or [Color Swap] modes of My Colors
  • Newly added My Camera settings

if you reset the settings to factory default and that doesn't help, you may need to replace the colorwheel. you can the part and do it yourself (or send it in for repair) from an infocus service center. try av solutions in ny. they're really good. www.avsolutionsny.com

Did he change the big video board?The main backlight video baord that the prob.

It may be time for a firmware upgrade that the company will do for $50. Otherwise try your menu and make sure no effects are enabled.

in the monitor menu you have degauss
select that option

if there is a speaker near the set it will draw the color out

yes, the original image may have been released too soon from the scan image input. check the original and see if the color is lighter. flip the image bottom to top and run 1 copy to see if the problem is still there in that location. if it is, then you have a backlight burnout occurring or dirty glass area.

I couldnot understand your problem please write your problem meaningfully...