Question about iLO 2600 Television

2 Answers


My TV is stuck in the component, no signal mode. Blue screen. It is about a year old. What should I try or not try? Can not get it on anything. Thanks, Teresa

Posted by on

  • 1 more comment 
  • Blkwolf Dec 02, 2007

    I have a ilo flat screen witha dell 8400 desktop. When I start in reg. mode it stops after the windows screen, then "No SIgnal". However when I start in safe mode I can run it and the sceen is visable, but the icons are large. Please help!

  • Juniorflava1 Dec 09, 2007

    I have a similar problem with my ilo 26 inch television , It will turn On with the remote or tv but the channel just wont change , please tell me what i should do

  • Anonymous Dec 31, 2007

    Mine starts out with a blue screen that says "Digital TV" in the top right hand corner. Then it goes to a black screen and it says "This is an encrypted channel".

    You can not get it to do anything else either with the remote or by using the keys on top of the TV. Help!



2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 26 inch HD t.v by ILO, but I cant get any High Def. stations on it, why is that???

Posted on Jan 14, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem at first. Then I went back to fry's and bought a new DVI cable. Make sure you bought the right one.

Posted on Dec 04, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My vizio is blinking back and forth from the blue no signal screen to the actual hdmi input screen which is connected to a cable box. What is going on?

Have you tried a different HDMI input? (If available.) You may be able to test the cable box of PS4 using component cables to confirm that all but the HDMI is not working. You may try pushing or holding the HDMI cables to see if you can make the problem better or worse to identify a possible flakey HDMI socket.

Jan 03, 2015 | Vizio 26 Class Edge Lit Razor LED LCD HDTV...

1 Answer

Ilo won't work with ps3

The set receive no signal at all. It will be best get it repaired by any experienced service technician.

Apr 22, 2012 | iLO 3200 32 in. LCD Television

1 Answer

I have an Ilo 26"

try adding another source to rule out tv issues then after that try looking up how to reset the xbox's video output i know my playstation can do it so xbox must have a defaulting setting obviosly whoever fixed your xbox left it in 1080p and your tv is 1080i minor problem just mildly frustrating ok hope this helps

Nov 17, 2010 | iLO 3200 32 in. LCD Television

1 Answer

DVD player and HDTV incompatiblity?

Which ports on the TV are you using to feed the video signal to the TV: Composite (yellow RCA), Components (red, blue, green RCA), HDMI?

Dec 23, 2009 | Samsung LA26R71BD 26 in. HD-Ready LCD TV

2 Answers

Green purple and blue bars rolling through screen

It is probably the main total assy needs to be replaced.

Jun 26, 2009 | Samsung LN32A550 32 in. LCD TV

1 Answer

Ilo 26 inch tv

I am sorry, Thats the one manufacturer that I diont have any experience with. although I would quess that its a signal processor that may be at fault being that you cant switch inputs.I would try to resubmitt your request to one of the other experts that may be famillar with that manufacturer.

Jun 08, 2008 | iLO 2600 Television

2 Answers


it sounds like there is a problem with either the output on the PS3 or the input on the circuit board of the TV. I would try a reset on the PS3 first. Also make sure that there are no other video or audio cords plugged into the PS3 because this will cause the PS3 not to send the signal via the HDMI.

Mar 14, 2008 | iLO 2600 Television

2 Answers

Tv does not respond to channel changes

The simpliest solution is always the best - I called the cable service provider; they reported an outage and quickly remedied the situation - but also tried to sell me their digital TV package. Thanks for your response.

Feb 16, 2008 | iLO 3200 32 in. LCD Television

1 Answer

ILO 32inch TV

ILO 32" lcd hdmi tech support Eastern Time
8:30 am - 9:00 pm (monday through friday)
9:00 am - 5:00 pm (saturday)

my 8 month old tv doesnt even turn blue. just blinking red light where on/off light display appears. very discouraged cause wallmart will not help. trying techsupport. i found this number from my purchase paperwork. hope it is helpfull to you.

Dec 10, 2007 | iLO 3200 32 in. LCD Television

2 Answers


We bought one as well, sometimes it comes on and sometimes it don't. I think walmart needs to refund our money. They knew they were a bad deal since they don't even carry them anymore.

Nov 12, 2007 | iLO 2600 Television

Not finding what you are looking for?
Televison & Video Logo

297 people viewed this question

Ask a Question

Usually answered in minutes!

Top iLO Televison & Video Experts

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Jaime Hernandez

Level 3 Expert

2326 Answers

Jason Morris

Level 3 Expert

362 Answers

Are you an iLO Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides