Question about Mitsubishi WS-65809 65" Rear Projection Television

2 Answers

Mitsubishi WS-65809 65 in Projection TV problem with vertical stripes

On all the inputs but HD input I see vertical stripes across the whole screen, spaced ~2" apart. They only disappear when the input video signal comes in from the XBOX 360 to the DTV input (on RGB with 480p) and only when the format is set to Standard. With other formats (Expand, Narrow, etc) the stripes reappear.
Is this some kind of setting that got messed up or some hardware problem? Please help.
Thanks,
Adam P.

Posted by on

  • 1 more comment 
  • Adam Pawlikiewicz Nov 25, 2007

    Thank you Bill for the info. You were the only one who came back with something. After paying for premium service 2 days ago, I was still waiting for ANY suggestions.

    I will try to find what that PTS Electronics can do for me.

    Adam P.

  • Adam Pawlikiewicz Nov 25, 2007

    Hello Bill,

    I was trying to find that outpost PTS Electronics under www.ptselectronics.com and www.ptselectronics.net to no avail. DO you know what is their web address?

    Thanks again,

    Adam P.

  • Adam Pawlikiewicz Dec 04, 2007

    Thanks Bill for the helpful solutions, I called Mitsubishi Service Center an they quoted me a price of $315 plus tax and shipping for the board.



    Do you think it is easy to replace the board? Should I attempt to do it myself?



    Thanks,



    Adam P.

×

Ad

2 Answers

Take it to a qualified repair service center, thats Mitsibishi authorized! These TV's are extremely dangerous and sometime leathal to work on , even being unpluged!!

Posted on Jun 03, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 934 Answers

I'm fairly sure that the 2hdw board is the culprit here. The 2hdw pwb is Mitsubishi original p/n# 935c966001 which has since been substituted to p/n#935c966002 and costs roughly $420.00 dollars plus shipping.
It's a common failure in these units, but it's not a difficult repair for a reputable shop..
Another alternative is to have ashop pull that board and send it in to PTS Electronics for rebuild. That might save about $100.00 dollars.
Please don't rate me badly for the bad news.
Good Luck!
Bill

Posted on Nov 25, 2007

  • William Rayburn
    William Rayburn Nov 25, 2007

    No problem, PTS has a site and a 1800 number... http://www.ptscorp.com/

    If you're pulling the board yourself you simple send it in to pts and they return it rebuilt. Normally that's about a ten day turn-around - but might be a bit longer with the holidays upon us..

    If a shop's doing this repair they might have the ability to rebuild it for about the same money.

    Good Luck!

    Bill

  • William Rayburn
    William Rayburn Dec 06, 2007

    Boards in a Mitsubishi are fairly simple, compared to other brand models... If you have some patience and know that each plug is numbered and has a corresponding numbered area on the board you can probably do it yourself... Just take your time...

    But if you feel a bit uncomfortable get a pro... It would be a 20 minute job for some tech...

    Bill

×

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: Mitsubishi Projection TV problem

I just started seeing red lines going across screen and picture has ghost now. Is lamp going bad? Red line is a somewhat u-shape about 1/4 from top of screen.

Posted on Mar 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Add hdmi port to mitsubishi ws-65807


I doubt it as it was never designed for that kind of input, Component works best on this set and it should have only one HD input for a box marked in the menu as DTV.

Dec 13, 2012 | Mitsubishi WS-65807 65" Rear Projection...

1 Answer

Display problem with Mitsubishi Projection TV


Do you mean vettical stripes across the whole screen
or bands on each side of the screen lik this
http://reviews.cnet.com/4352-12658_7-6544387.html
If this is what you mean then your users manual has
the solution on pages 33-36 if you dont have the manual
it can be downloaded here http://www.tacp.com/tacpassets-images/models/50hp66/docs/50hp66_om_e.pdf

Nov 22, 2007 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

Why can't my Mitsubishi Medallion go to 1080 with my Direct TV HD service?


if it is a ws-65613 you would have to be connected to the DTV component input on the back of the set as this is the only HD input for this model.

If the set will not go to that input (skips it by) let me know as there is a way to restore missing inputs--if you hook HD in any other way it will not work on this model; let me know if you need help;

I am here to help and know these sets well.

SD TECH

Mar 01, 2010 | Mitsubishi WS-65613 65" Rear Projection...

1 Answer

I have a Mitsubishi WS- 55859 projection screen tv and the screen/lamp flashes on and off a couple of times then lamp go off but you can still hear static.The TV is on but not picture is getting to the...


The WS-55859 does not have a "Lamp" it is a 2001 rear projection set with three picture tubes.

Have (if this is the correct model) you tried the self check this set has?


Also do you have this problem on all inputs--tuner, and various rear inputs?

The more you tell me the better I can help you.

Got a IM?

SD TECH

Feb 23, 2010 | Mitsubishi WS-55859 55" Rear Projection...

1 Answer

Mitsubishi WS-65907 rear projection TV HD goes blue.


I would look at the source for the Hd signal as being the problem--if you are using some kind of cable or sat box it will deliver the signal to the DTV input on the back of the set--this is the HD input for this set.

It is possible to have a problem like you describe be one in the set--but very unlikely----have you looked on that green signal board for any signs of Glycol?

Anything that will produce a 1080 signal to the DTV input should tell you if the problem is the set or the source of the HD signal that is causing the problem.


If you have questions or need advice let me know--I am here to help people.

if this information has helped you rate this solution as i do this here for free.

SD TECH

Dec 05, 2009 | Mitsubishi WS-65907 65" Rear Projection...

1 Answer

Mitsubishi WS-65315 plug in HD comp shows as 480i


Greetings,

In the input assignment menu make sure that the DTV (the only 1080 input on this tv) is set to Y/Pb/Pr and see if that fixes your issue with at least the HD-DVR.

BTW- the HDMI information "1080i HD can only be selected if TV has HDMI inputs". is not correct.

Feb 25, 2009 | Mitsubishi WS-65315 65" Rear Projection...

1 Answer

The television remote controll is broke.


Hi,
You can get Original Remote for WS-65815 from Mitsubishi Parts.

Nov 24, 2008 | Televison & Video

1 Answer

TV screen goes blank but power stays on


Sounds like the CRTs are going into protective blanking due to the vertical output ic needing to be resolderd. Try resoldering the vertical IC that may possibly fix the issue.

Jun 15, 2008 | Mitsubishi WS-73713 73" Rear Projection...

2 Answers

Mitsubishi Projection TV problem


Hello Adam...

Most likely a bad formatter board, which plugs in vertically on the signal board.

Nov 25, 2007 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

Vertical Stripes on My Mitsubishi WS-65809 Projection TV


ADAM,

YOU NEED TO ADJUST THE SCREEN VOLTAGES TO BALANCE IT OUT. YOU CAN DO IT YOUSELF. HERE IS A WEBSITE. PLEASE READ THROUGH IT ALL. ITS FOR RED TINT OR LINES, BUT ITS USE IS FOR THE SAME PROBLEM AND COLORS. HOPFULLY, ON A LITTLE ADJUSTMENT IS ALL IT NEEDS.

http://www.somelifeblog.com/2007/06/sony-projection-tv-red-line-repair.html

PRIDAH

Nov 22, 2007 | Sony KP-57WS500 57" Rear Projection...

Not finding what you are looking for?
Mitsubishi WS-65809 65" Rear Projection Television Logo

424 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1213 Answers

The Knight
The Knight

Level 3 Expert

75157 Answers

Jaime Hernandez

Level 3 Expert

2334 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...