When using the blue tooth I can make and receive call but the person on the other end can't hear me

Sounds like a setting issue, i.e. you have your blue-tooth on mute. Check the instruction manual and turn mute off!

try and use it with a hands free set or a blue tooth.. if that works contact www.phoenixtec.ca the can help you

Hi, yes you can use plantronics 230 blue tooth for your blackberry phone.All you would need to do is to pair the device with your phone.that will do.

How to pair a phone to a blue tooth device?

Instructions

Pair Your Blackberry with a Blue-tooth Headset



Turn on Blue-tooth headset and Blackberry hand-held.

Enable the Blue-tooth radio by going to the options window and clicking on Blue-tooth. Click on Enable Blue-tooth in that window.

Add your Blue-tooth headset to your Blackberry by clicking on Add Device in the Blue-tooth window.

Find and select the name of your Blue-tooth headset from the list that appears. The Blackberry will search for all Blue-tooth devices within range, so other devices might show up on the list.


Click Activate Blue-tooth device if you receive a call and the Blue-tooth headset does not pick up automatically.



Use your Blue-tooth Headset with your Blackberry

Make sure the Blue-tooth radio on your Blackberry is turned on before you try to use your Blue-tooth headset.

Use the voice-dial feature to call contacts if your headset has that capability. Not all headsets support voice dialing, but more of the newer models do.

Press the on/off button on your headset to end a call or use the end button on the hand held.



Tips & Warnings

Pair your Blackberry with any Blue-tooth-enabled device using the same steps as those for connecting a Blue-tooth headset.

Remove your Blue-tooth headset from the list of paired devices on your Blackberry by selecting and clicking on Delete Device in the Bluetooth window.

Configure your Blackberry to connect to a paired Bluetooth headset without asking for authorization in the Bluetooth Device Properties window. That will allow your headset to automatically reconnect even if you take it out of range temporarily.

Only configure a Bluetooth headset to your Blackberry once. Once you configure the pairing between the two devices, the settings are saved and you do not have to repeat the processes each time you use it.

Turn off the Bluetooth radio on your Blackberry when not in use for security reasons.

Adjust volume on your headset or hand-held to a comfortable level. Excess volume from in-the-ear headsets can cause hearing damage.

You must adjust the volume on your phone; make a connection with some one using the blue tooth and then try to raise the volume on your phone and also on the car stereo and you'll hear the other person. hope this resolve your problem.

IT will give the noise because of the following reasons

• Due to signal distortion and also that you mieght be useing faulty bluethooth head set .
• It also occur due to low bettry chargeing
  

Things to do !

1. check your blue tooth head set with other Motorola cells
2. replace your blue tooth head set
   
3. clean the connector of the blue tooth cable
   

Please Rate !

try to remove the Jabra Blue tooth that you have under th list of your paired devices. try to turn off the phone and blue tooth then pair it again.

when in the call push the volume button on the side of the blackberry

we will try toss, when your in conversation with a patient person try your phone blue tooth volume and once it says full volume try hitting set. good luck.

click on the blue tooth icon in your tools menu.
delete unwanted connections and switch offf the option. restart phone