Garden Logo

Related Topics:

Doreen Mathie Posted on May 23, 2018

Timing of the mow board - Garden

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

How do I eliminate the timing belt on a cub cadet 42 inch mowing deck

Are you sure this is what you want to do. Timing belts drive the camshaft on a 4 stroke engine and if you remove it the engine will not run. Are you sure it is not some other belt that you want to remove.
0helpful
1answer

Help finding answer to question for mtd mowing deck blade timing

no i jus install belts the engine is all that to be timed
May 16, 2017 • Mtd Garden
2helpful
2answers

I have a 2013 snapper model #2691188 it has a 25hp B&S it has a rough idle and pops and back fire a little when mowing ?

I would check the plugs and make sure they are not fowling out or replace them. Check the air filter as well.
0helpful
1answer

One cylinder bends push rods

Sounds like you're timing is off this unit have a timing belt or timing chain it might've jumped to the valves may be opening two early or too late hit in the Pistons
0helpful
1answer

I just changed timing chain in my 95 Nissan sentra and it started red lining mow I can't go above 20 MPH. Can anyone help?

I would check your timing marks you may be off 1-2 teeth either direction as these gears tend to shift during instalation
2helpful
2answers

The left blade on my John Deere LT155 stopped working

Besides the drive belt, there is a timing belt inside the mowing deck. The left blade is run by the timing belt. I imagine the timing belt is broken.
0helpful
3answers

Engins starts and runs when mowing will backfire and stall.

I am not sure what time of lawn mower this is, but if the blade is directly tied to the motor, usually the belt will just slip if not, but if this is directly connected to motor, it might have jumped timing. If this is not the case, inspect under the mower deck, and determine if there is something jamming the blades against the deck or if their is something bound around the blade, this can cause more strain on the motor, which could result in the symptoms your experiencing.
0helpful
1answer

My craftsman 0 turn keeps dying while I am mowing. Help I .have tried to reroute the safety switch, and ordered another one.But with it running I mow a min. and it shuts off. I get off, let it cool, and...

You may need to adjust the timing, 'either' on the spark plug, or the adjust the gap between the magneto and the contact.
If the timing is not on the correct setting, the engine is liable to overheat.
That should do it.
Don't forget lot's of lovely 'thumbs up' for me :)
Thankyou
Aug 01, 2009 • Garden
1helpful
1answer

15 hp kohler starts runs but when put load on it dosnt have enough power to mow help

oil pump maybe going bad throwing timing out a bit,this would cause a governer malfunction keep pushing it the timing belt will fail that's if this engine is similar to the triad 16 hp horizontal shaft,not sure about vertical
2helpful
1answer

Lawnboy 10301 won't start

you need spark, gas and timing to make it run. have you checked spark? sounds like you are getting gas. did you hit anything hard with the blade while mowing? this can throw it out of time.
May 23, 2009 • Garden
Not finding what you are looking for?

24 views

Ask a Question

Usually answered in minutes!

Top Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...