Question about Magic Chef CGR1110 Gas Kitchen Range

1 Answer

Any Magic Chef or Any USA manufactured Gas Range/Oven- use in Japan 50HZ 100V

I want to purchase and American Gas Range and use it in Japan. My local voltage is 100 V 50 HZ. US appliances are sold here but the price is from 3 to 10 times higher than if purchased in the USA.

What product will work here or what modifications are required to make the range operate properly here. In the past, a booster transformer was the only thing required to allow the solenoid valve to open.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 906 Answers
Re: Any Magic Chef or Any USA manufactured Gas...

Good day,
hope this link below will solve your problem.

kitchen appliances

Posted on Jul 31, 2010

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:


Magic Chef Gas Ovens

If your Magic Chef gas oven doesn't light, most likely the oven igniter (rectangle style) is the problem. The igniter may glow and appear to be working, but doesn't get get hot enough to open the oven bake valve. I recommend replacing the igniter first.

on Mar 21, 2010 | Magic Chef 31000 Gas Kitchen Range

1 Answer

Oven wont come on f3 code magic chef gas range

Hi hardcaseone,

The F3 fault code description is a shorted or open oven temperature sensor (RTD). Please check the sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor (RTD) if wiring is ok.

Hope it helps.

Thank you for using FixYa.

Oct 28, 2010 | Magic Chef 31000 Gas Kitchen Range

1 Answer

My new magic chef oven makes a slightly sputtering noise all the time. It is not turned on, and I hear this noise. I am concerned it might not be hooked up correctly. please help! Debra p.s. it has a...

Hi Debra,

It sounds as if you may have air or water vapour in your gas line or burner. I suggest you contact your gas supplier or the manufacturer of the oven to get professional advice.

Alan Hood

Nov 25, 2009 | Magic Chef 31000 Gas Kitchen Range

1 Answer

Our magic chef oven f1 code keeps coming on

Range/Stove/Oven Fault Codes

F1 1. Watchdog on board
2. Touch membrane defective To determine which component is at fault, disconnect ribbon strip. If NO fault code, replace membrane, otherwise replace board F2 Oven too hot Check oven temperature sensor F3 F4 Open or shorted oven temperature sensor Replace F5 Hardware and watchdog circuits disagree Replace clock assembly (also called the ERC) F6 Missing AC signal Replace clock assembly (also called the ERC) F7 Function key shorted Replace touch pad F8 Analog/Digital converter Replace clock assembly (also called the ERC) F9 Door latch Check door lock circuit F10 Function key stuck Replace touch pad

Feb 07, 2009 | Magic Chef 31000 Gas Kitchen Range

1 Answer

Get too much of a gas smell when Magic Chef oven prheats up.

gas does NOT take that long to heat up!!
Shut that thing off before you kill your family !!!
Take it back or call someone to fix it !
This is a ticking bomb you have,...
If You smell gas then you should call the city or 911 .

Jan 15, 2009 | Magic Chef 31000 Gas Kitchen Range

1 Answer

Ovens not lighting magic chef


The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or Oven not Heating

Oven Problems Replacing the Igniter



Dec 30, 2008 | Magic Chef 31000 Gas Kitchen Range

1 Answer

Oven will not come on

May be the ignitor, replaced mine and it fixed it. A gas company guy told me that is common in Magic Chef ranges.

Dec 19, 2007 | Magic Chef CGR3742 Gas Kitchen Range

1 Answer

Magic Chef Gas Range

Does this oven glows before igniting the gas in the oven? if it does this unit uses a glow bar ignitor in the oven and spark module for the top burners.If it you dont see the spark( or hear the ticking sound the there will be no ignition. Do you smell gas even if there was no ignition happening? If there's gas that eliminate your gas regulator. If it's only one burner with spark but gas won't come on then your gas valve is deffective. But if there's gas and no spark ten it could be poor grounding, wiring, connection or switch or even spark module problem. You to need call your local Appliance service provider on this one. I do not recommend anyone fixing gas related problem if they are not a qualified servicer.

Jul 29, 2007 | Magic Chef CGR1110 Gas Kitchen Range

Not finding what you are looking for?
Magic Chef CGR1110 Gas Kitchen Range Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Magic Chef Kitchen Ranges Experts

Barrett Palumbo
Barrett Palumbo

Level 2 Expert

1772 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers


Level 3 Expert

1772 Answers

Are you a Magic Chef Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides