Question about Flat Panel Televisions

1 Answer

Samsung tatus hln467wx/xac

Shows dvd conect playes for a sec then says no signal

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 179 Answers
Re: samsung tatus hln467wx/xac

If your dvd player is in component one change it to component two or three..component one will only accept up to 480p as an input, two and three will accept up to 10801..if you are in 2 or 3 then you will need an analog( bp94-00434a) AND a digital (bp94-00502w)
circuit board...the reason for both is they made a change in the digital board and unless you replace both you end up with no sound

Posted on Nov 30, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Plays CDs but not DVDs.

get a dvd laser lens cleaner and use it after every 3 movies

Jun 05, 2015 | RCA 22LA45RQD LCD TV/DVD Combo

1 Answer

I have just brought a Samsung SMART TV and a Samsung BluRay player and we are experiencing audio lag when it plays some BluRay dvd's. The lag is quite severe (3-5 secs) on some dvd's. How can this...

I had the same issue with a Samsung 1580 BD player. Stopping the movie ans starting it again could sometimes solve the problem for a little while. The problem only occured when using bitstream sound. Switching to PCM never showed the problem. The player was faulty and was replaced by the shop.

Jul 18, 2011 | Flat Panel Televisions

1 Answer

Can you show me how to connect up the scart and aerials up to the following so they operate correctly Samsung PS42C450 42-inch 600Hz Widescreen HD Ready Plasma TV with Freeview SAMSUNG DVD-SH893M 160GB...

hello firstly scart lead from sky box to tv1 in) this is at the top there are two AV inputs ,,,on the bottom AV slot this is where your DVD conects too).iff you are using sky you will not need aerial in back of tv as this is for analogue use such as indoor antenna or outdoor antenna or iff using horizon the scart lead will suffice for all goodluck

Mar 19, 2011 | Samsung PS42C91HDX 42 in. Plasma TV

1 Answer

Samsung lns4051d 40in has horizontal lines across screen and additional "fuzzies" on hd channels

This sound likes the incoming signal is week. You should play a DVD player to see if the problem stays same or not.
If you try all sources ie HDMI, AV Component, etc...the TV show the same problem. There are two possibilites: T-Con board or main board need replacing. You should need technician to figure out the problem. Hope it help.

Aug 13, 2009 | Samsung LN-S4051D 40 in. LCD Television

1 Answer

Nosignal when i power it on

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} If you are trying to view the DVD on the Samsung TV, you need to firstly connect the DVD to the appropriate connection on the TV.

Once connected, with a Samsung TV, you need to press the SOURCE button on the TV remote control to view any external sources such as your DVD player.

The ‘NO SIGNAL’ message would indicate there is no signal, if you have not tuned your channels in, this may be the digital tuner you are viewing. Press the source button whilst a DVD is playing in the DVD and see if an image displays.

Jul 16, 2009 | Samsung Flat Panel Televisions

1 Answer

Digital - Weak or no signal digital coax when hdmi dvd player on

if u have placed your DVD next to your tv ... just maintain distance between then and check out

Apr 01, 2009 | Samsung LE40R74BDX 40 in. LCD Television

1 Answer

I can't seem to get my dvd player to play on screen

Set the TV to look for a signal on the same input your are hooking your dvd player to. Example, if your dvd is hooked to video 1, set the TV to show video 1 on the screen.

Dec 31, 2008 | Dell Flat Panel Televisions

2 Answers

No sound from TV only when playing DVD

Check carefully the RCA conections or others.Sometimes this conections break inwards end cause this problems.Check also the lead and the Set up from surround sound.Verify if the TV has settings for this kind of operation. A strong hug !!!

Jan 16, 2008 | Samsung LE40R72BDX 40 in. HD-Ready LCD...

Not finding what you are looking for?
Flat Panel Televisions Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

66404 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 3 Expert

6993 Answers

Are you a Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides