Question about Sanyo PLC-SW30 Multimedia Projector

1 Answer

PLC-SW30 Multimedia Projector no power

Have been useing for gameing went to turn on no power. have changed fuse in plug have opend up unit but cant see any fuses can someone guide me please?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 43 Answers

You have a classic temp sensor problem. Its a fail safe on the projector, basically a fuse that bridges the main power cables. Looks like a little pot, With a white ceramic head.
Now what it does, Is the white ceramic head rises as the unit gets hotter, and thus breaks the power circut. All you need to do is, open up the unit, locate the sensor (its mounted next to the lamp on your projector) And push the little white head back down, thus closing the circut, and restoring power supply.
Here is the full repair schematic to guide you. :)
http://yama.co.za/forum/index.php?topic=146.0

Posted on Dec 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When plugged in no power seems to be going in.changed fuses how do i fix it?


Check that the lamp and filter covers are tightly secured otherwise the unit wont switch on

Jun 29, 2011 | Sanyo PLC-SW30 Multimedia Projector

1 Answer

Sanyo plc-sw30 i have a problem when i power on the projector , there is no power lamp on a very slow light is visible and the projector shut down and the fan are in very high power


The uProcessor thinks that it has overheated and is frantically trying to cool down what it thinks is a hot lamp.
This condition has many causes from an exhausted lamp to lamp ballast fault or even a power supply fault or a heat sensor/fan fault.

Mar 30, 2011 | Sanyo PLC-SW30 Multimedia Projector

1 Answer

How to fix shadow (stain) projected onto screen by projector Sanyo PLC-SW30


This could be showing the signs of the lamp needing replacement. if not dust has accumulated (clean filters) onto the mirrors in the projector.

May 15, 2010 | Sanyo PLC-SW30 Multimedia Projector

2 Answers

PLC-SW30 not powering ON


Without knowing if the internal fuse is ok, a diagnosis is difficult. With the unit unplugged, you could *carefully* try to remove the fuse or, better yet, if you have a small mirror (dental mirrors are what the techs use) try to examine the fuse for an intact wire. A lot of units have a thermal breaker but that should never trip unless the temperature gets so high as to risk damage.(You never want to give that thing a reason to kick out)

Aug 29, 2009 | Sanyo PLC-SW30 Multimedia Projector

1 Answer

Sanyo plc sw30 help


i had a sanyo plc sw30 wich had the same problem and it turned out to be the bulb replaced it with new one and this seemed to solve the problem. Theres a few places to get new ones but they are not cheap looking at between £150 to £180 hope this helps

Nov 02, 2008 | Sanyo PLC-SW30 Multimedia Projector

2 Answers

Sanyo PLC-SW30


The filters are starting to show their age. This is a normal occurance for projectors and is the result of heat. The filters and/or the mirrors might need to be changed.
Dan

May 08, 2008 | Sanyo PLC-SW30 Multimedia Projector

1 Answer

Sanyo PLC-SW30 Multimedia... Problem


sanyo_plc_sw30_multimedia_problem i need support

Feb 27, 2008 | Sanyo PLC-SW30 Multimedia Projector

1 Answer

No powers ups


does the lamp try to fire up
check lamphouse and fan filter safety switches

Jan 08, 2008 | Sanyo PLC-SW30 Multimedia Projector

Not finding what you are looking for?
Sanyo PLC-SW30 Multimedia Projector Logo

Related Topics:

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2237 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Sanyo Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...