Question about Nokia N70 Cellular Phone
Some good advice from someone who has been looking for this solution for many months, FORGET jumper solutions because you are just wasting your time with this and forget reheating the board as well.
I do not have a diagram to upload but those of you should know where the black bga chip is on the left hand side of the keypad system connector, that is all you have to replace, no jumpers needed. I have just finished my fourth N70 in this way, just change the chip and nothing else.
you can also find the chip on 6680 board.
please take my advice and you will not regret it.
Posted on Aug 01, 2009
Cannot operate the phone fast because it hangs and any to prevent is restarting the phone
Posted on Sep 27, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: N70 hanging
i think the software of your phone has got corrupted due to some virus. it would be best to reinstall the softwareon your phone.
for this you would need a few things handy before you start off. first move all your data like pictures and songs from the phone memory to the memory card. now you would need to have nokia pc suite installed on your pc and you would need a data cable compatible with your phone. keep your phone in general profile and make sure the battery is full. connect the phone to the computer. the computer would recognise and install the usb drivers for the phone. now open nokia pc suite and configure the phone. next click on backup phone data on the nokia pc suite main screen. now it would backup all your data from the phone like contacts, sms, settings etc onto your computer. next click on software update. the suite would search for the software (note: you need to be connected to the internet) and would turn up with the software for your phone. now the installation would proceed. once it is done, again click on backup and restore the data from pc to phone. the reformat is done!
after this i would advice you to be careful while you recieve data over bluetooth or data cable. accept data only from reliale sources
Posted on Aug 19, 2008
Format your phone manually by typing this code *#7370# followed by the security code of your phone or you personalized security code.then,let the phone restart completely.And try to observe if it is working fine after formatting.
Posted on Jan 20, 2010
n70 always have this kind of pro.
normally the phone display IC had been spoil.
made it the display cant see,cause the IC are fix by soidling,i think u can be fix by your self,u may send for technician for replace.
if my solution useful,please voted me,thank..
Posted on Jul 31, 2010
Tips for a great answer:
Apr 23, 2014 | Nokia 7370 Cellular Phone
Oct 15, 2009 | Nokia N70 Cellular Phone
Jul 15, 2009 | Nokia N70 Cellular Phone
Aug 09, 2015 | Nokia N70 Cellular Phone
Oct 16, 2014 | Nokia N70 Cellular Phone
1,179 people viewed this question
Usually answered in minutes!