Question about Line 6 Spider Iii 30

1 Answer

I broke the master volume switch off. How I do I

I broke the master volume switch off. How I do I fix it?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have a soloution that will work as long as you still have the metal shaft on it?
if it does go to your local electrical store and buy a new knob.
then all you have to do is screwthe knob back on to the amp.
please reply and tell me if that helps.

Posted on Aug 01, 2009

  • dsuter472 Mar 22, 2011

    The shaft broke at the base and a new volume control needs to be installed

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to get sound from a nady audio 4130 mpm 4 channel power mixer


First, plug it in. Next connect the speakers. Center all eq controls both master and channel. Turn off any reverb or effects. Turn the master volume 1/2 way up. Plug a sound source into channel 1 wiyj the channel volume all the way off. Turn on the amp. Slowly raise the channel volume until you heat output. If you get nothing, it's broken.

Nov 10, 2016 | Nady Systems Music

1 Answer

Which is the master volume to boss me 25 ?


Hi, I can help you with your question. On the face of the effects, towards the right side, there are three settings that can be adjusted: DRIVE, TONE and VOLUME. The VOLUME knob is your master volume. The expression pedal can adjust volume, but it's output volume is controlled by the master VOLUME knob we just identified. I hope this has helped you, and if it has, could you please click on the "helpful" button ? Thank you!

Feb 03, 2016 | Roland Boss ME-25 Guitar Multiple Effects...

1 Answer

Master volume is scratchy on MG100FX


All i can suggest is to use electrical contact cleaner on it from the inside. But you,ve already done that. And i would imagine that the master volumes will be the same to, Harry

Dec 28, 2013 | Marshall Music

1 Answer

Some keys on the left side are not giving sound when played and the master volume is loosing can it be fixed or should i have to buy a new master volume


It's about hardwares.
Wiring connection sockets is loose.
Inside the korg PA50,Wiring connection to the keyboard is separate to left and right.
Open/disassemble your korg.
Look for connection cable to the left keyboard.
One end is on the keyboard,the other end is at the mainboard.
Unplug both of it, then mounted again.
For master volume,better buy new one.

Jul 31, 2013 | Korg Pa50 Professional Arranger Keyboard...

3 Answers

Hello, I own a hotrod deluxe. I take great care for it and never move it. Normally on the clean channel, the volume is regulated by the volume and the master. Today the amp sounded only half as loud as...


Do you turn on standby every time and wait for the tubes to heat up first? If you don't, it can severely damage the tubes.
But a common cause of this could be just old tubes. Like any other piece of technology, tubes get old. If you like to play your amp LOUD then they wear out a lot quicker. You have to replace tubes every now and then. Because I'm not there to check out your amp, I can't give you an exact answer but it sounds like that's the problem. This isn't always a bad thing. You can make the sound of your amp exponentially better with nicer, new tubes. Your amp has 12AX7 tubes. Very common tubes to use actually. I'm not sure what kind of music you play, I'm assuming mostly rock and blues. But here is a list of tubes and reviews on them.
http://thetubestore.com/12ax7review.html
This is how to replace a tube:
http://www.ehow.com/video_4438285_change-pre_amp-tubes-guitar-amps.html
Upkeep on a tube amp:
http://www.ehow.com/video_4438295_replace-tubes-guitar-amp.html
A note he doesn't make in the video is to dust out your amp. I use the compressed dust spray for the inside of computers.
So overall, stop turning up your amp to 11, make sure it's well ventilated and dust it out from time to time. Hope this helped.

Jun 18, 2011 | Fender Hot Rod Deluxe Guitar Combo...

1 Answer

Hi I have a marshall haze15w amp and stack, the problem seems to


There are many models of Marshal amps icluding 15Watt types.

First thing to try is to see if headphones have normal volume. If they do, then the headphone jack switch that connects the speaker is LIKELY bad.

If the headphones do not have any volume, LIKELY causes are:

1. Fried output power amp

2. Volume pot is broken or has bad solder joints to the circuit board.

Jul 10, 2010 | Marshall 15 Watt Guitar Amp

4 Answers

Marshall MG50 DFX amp line out/headphones not working


Contrary to what's posted above, the Marshall MG series does not pass the speaker power output through the headphone jack, and inserting the headphones into the jack does not disable the speaker. The headphone amp is a separate circuit and it's input is taken before the master volume. So Jan's post is exactly right. Turn off the master volume and turn up all the other gain/volumes as high as they will go. The other issue is that the headphone jack's output does not drive low efficiency headphones well, so you need some headphones similar to Sony's MDR-V700s to hear it well. Earbuds just don't cut it.

Mar 07, 2010 | Marshall Mg50dfx 50-Watt Combo Guitar...

1 Answer

High pitched squeal when the input jack is used.


Sounds like your master volume is turned up too much. The channel volume will make the squealing go away(caused by high gain and humbuckers). The best thing to do is dial in your favorite presets and change the channel volume to the correct level with the master volume where you usually keep it. I use my Spider Valve at master volume at about noon and the channel volume between nine o'clock and noon. Let me know if this does not solve the problem......

Aug 22, 2009 | Line 6 Spider Iii 15 Modeling Guitar...

2 Answers

MG100HDFX Amp - crunch setting seems too loud


There are 2 channels, Which means there are 2 sets of knobs ... One for clean and one for crunch. Start out with a low master volume and set up the crunch, Then the clen and switch between the 2 and make adjustments until they match volume wise ... Then turn the master up.

May 12, 2009 | Marshall MG100HDFX 100-Watt Amplifier Head

Not finding what you are looking for?
Line 6 Spider Iii 30 Logo

Related Topics:

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Line 6 Music Experts

Michial Gueffroy

Level 3 Expert

1138 Answers

Vito Vacirca Jr.

Level 2 Expert

140 Answers

Larry Stiles
Larry Stiles

Level 2 Expert

287 Answers

Are you a Line 6 Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...