Question about RCA TruFlat 27F520T 27" TV

1 Answer

Trurn on the tv wont turn on it gets power but when i push power nothing happens

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers
Re: trurn on

I had one that wouldn't turn on and the e-prom was bad. Also the menu tac switch was leaky.

Posted on Dec 06, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Old television will not turn on

Check and replace damaged component/s at its main power regulator section circuit. If you wish to get some details, check the site linked here. Pull up older posts. Check the site in 'Mosaic' view. It will make search easy.

Jan 06, 2014 | RCA F32450 32" TV

1 Answer

My haier htr20 tv wont power is completely dead.

Check the main power regulator section circuit.

May 20, 2012 | Haier HTR20 20" TV

1 Answer

TV won't come on

I have a 32 inch tv was working great then went into standby mode and wont turn back on. I have unplugged and am waiting please help!!!!

May 18, 2008 | Sony FD Trinitron WEGA KV-36HS510 36" TV

1 Answer

TV wont stay on.

Most likely the TV is detecting an internal problem with it's circuitry and is shutting itself off to prevent further damage. You'll need to have a professional look at your set to determine exacly what's going on. Aside from leaving the power cord unplugged for five minutes, then pluggin back in and trying it again, there's nothing anyone can do from here. Sorry.

Hope this helps, and please rate my advice, good OR bad.

Good luck!

Feb 04, 2008 | RCA D32F750T TV

1 Answer

Tv wont turn on

I had the same problem and took it apart. Before the repair there was no "click" when I pushed the button, a clue to the problem. The on-off button on the front pushes a weakly made angle piece of plastic inside which had broken. The plastic piece in turn is supposed to push an internal switch which is offset to one side.

I used epoxy (Araldite) to repair the broken plastic angle piece, but it still looks weak to me so I switch the tv off at the wall and leave the on-off button alone (though it does work now).

Opening the case requires some knowledge and care, and can be dangerous. It may void the warranty so be careful or give it to a qualified repair person.

Hope this helps!

Dec 12, 2007 | Standard (CRT) Televisions

2 Answers

On off on my 32 inch rca

Bad tactil switch behind buttons or possible bad solder connects
in microprcessor circuit............Sounds like an odd problem....T.

Nov 07, 2007 | RCA F32450 32" TV

1 Answer

Wont power on

thers an open resistor near power supply secondary section,supply voltage to 5v and 12v to system control ic, or check the vertical ic for malfunction

Sep 14, 2007 | Sony FD Trinitron WEGA KV-34HS420 34" TV

1 Answer

Samsung TXN2745FP

1 your power must have failed get it checked. 2 there might be problen in horizontal section.

Sep 13, 2007 | Samsung TXN2745FP 27" TV

1 Answer

TV wont turn on

just throw it out and never buy a sony again. Sony really went down hill

May 01, 2007 | Sony FD Trinitron WEGA KV-24FS120 24" TV

Not finding what you are looking for?
RCA TruFlat  27F520T 27" TV Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66352 Answers

John mullen

Level 2 Expert

229 Answers


Level 3 Expert

2963 Answers

Are you a RCA Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides