Got brand new phoenix gold the generator button won't click off so steam continueas.

If your Phoenix Gold iron is not heating up and all the blue lights are flashing, it indicates a potential issue with the iron. Here are some troubleshooting steps you can try:
1. Check the power supply: Ensure that the iron is properly connected to a functioning power outlet. Make sure the power cord is securely plugged in and that there are no loose connections.
2. Allow the iron to cool down: If you have been using the iron continuously for an extended period, it may have reached its temperature limit and shut off for safety reasons. Let the iron cool down for a few minutes and then try turning it on again.
3. Clean the iron's soleplate: Over time, the soleplate can accumulate dirt, residue, or fabric fibers, which can affect the iron's heating performance. Make sure the iron is unplugged and cooled down before cleaning the soleplate. Use a damp cloth or sponge to gently wipe the soleplate and remove any debris. Avoid using abrasive materials that could scratch the surface.
4. Check the water tank: If your iron has a steam function, ensure that there is sufficient water in the tank. If the water level is low, refill the tank according to the manufacturer's instructions. A low water level can prevent the iron from heating properly.
5. Perform a reset: Some irons have a reset button or a combination of buttons that can be pressed to reset the device. Consult the user manual for your specific model to find out if it has a reset function and how to perform it.
6. Contact customer support: If the above steps do not resolve the issue, it is recommended to contact the manufacturer's customer support for further assistance. They can provide specific troubleshooting steps or advise on repairs or warranty options if necessary.
Always refer to the user manual provided with your Phoenix Gold iron for model-specific instructions and safety guidelines.

GX 1200W 1-Channel Monoblock Class D Amplifier - Phoenix Gold click on manual and download it

http://www.fixya.com/support/t27001330-steam_button_phoenix_gold_iron_wont_turn

put in water
take it to a repair shop or just junk it and get a new one

Hi lewis,

-Go to Xbox live gold generator download website-open a web browser and type in www.xboxlivegoldmembershipgiveaway.com

-Download Xbox live gold generator-on website, click the "DOWNLOAD" button to get Xbox live gold generator program on your computer
-Launch generator-double click on download file to open program
-Generate a code
-Get code
-Go to Xbox's website
-Click on redeem code-Xbox live gold-redeem code
-Enter 25 character code you generated
-Redeem gold

This may either be because you may not have the correct generator(either the wrong size model or the wrong voltage generator) or the heating element may be damaged, although this would be unlikely being it is a new generator. Go to www.mrsteam.com and size your room. Remember it is important to have the exact room dimensions AS WELL as material of the wall (ceramic, porcelain, natural stone etc) due to the fact that wall material is largely where you have all your heat loss and units have to be sized accordingly to the wall material of your shower otherwise you would surely end up with the wrong size.

this has a water level sensor known as reed switch and works with magnetism

this sensor must have given up



Thanks

they go for about 149.00 each if they are new then very close to new price. if they are used expect about half price.

Brand New Swan steam generator iron S15040N Steam button stuck in the depressed position so steam not turning off

Contact Phoenix Gold at 800.950.1449