Question about GE JKS05 Electric Single Oven

2 Answers

GE JSK05 Electric Oven

Getting F1 error. Have done what the manual said to do but have not had any success.
Thanks.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 68 Answers

According to the GE website, the "F1 usually means that there is a problem with the keypad. Many times it means the keypanel needs to be replaced". You can verify this on the GE website.

I have been able to help many folks with a similar problem. You can find my solution on at the following link:

http://fp1.centurytel.net/Powerman/Dreaded%20F7%20Problem.pdf

I have shared this with over 1450 folks and most report success. Hope that it works for you too. Please let me know at:

hutchipop@yahoo.com


Posted on Nov 26, 2007

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 213 Answers

F-1 means the ERC which it the clock/oven control is bad. youll have to replaced the oven control to fix the problem

Posted on Nov 25, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm getting a constant beeping sound and a F1


The F1 error code means that the computer thinks a button on the touchpad is stuck. Sometimes this can be resolved by making sure the touchpad connector fits tight into the control board. The F1 code can be cleared by pushing CANCEL/OFF. If it returns the touchpad needs to be replaced

Aug 10, 2011 | Magic Chef 9112 Gas Double Oven

1 Answer

My oven when turned on goes to F1 and the heat is like broil...only the top burner comes on????


Hello,Please use the chart to determine which stove you have. You will have to look at the model number. The first 3 numbers will be the series on the chart. In most cases an F1 error would require replacement of the electronic control. This part is commonly refered to as an EOC or ERC. However this type of repair is usually reserved for repair specialists.

KENMORE Range/Stove/Oven Fault Codes – 362 Series (General Electric)
F1 = Stuck Touch Pad Key - Replace Electronic Range Control (ERC).

KENMORE - 911 Series (General Electric/Roper)
F0-F1-FF = Failed transistor in Electronic Range Control (ERC).

KENMORE Range/Stove/Oven Fault Codes- 665 Series (Whirlpool)
F1-E0 EPROM Error - Electronic Range Control (ERC).
F1-E1 EPROM Error - Electronic Range Control (ERC).
F1-E2 U/L ERC Errors - Electronic Range Control (ERC).
F1-E3 Fuel Type Fail

Kill power 30 seconds-Cancel-Start/Enter-5 seconds-Should see “E” for electric-
“9” for gas-If code changes again-replace Electronic Range Control (ERC).

KENMORE - 790 Series Electronic Oven Control (Frigidaire)
F1 = Shorted Touch Pad = Electronic Range Control (EOC) Internal check sum error.
Runaway Temp = Replace Electronic Oven Control (EOC).

Kill power 30 seconds - if error returns - replace Electronic Oven Control (EOC).

Thanks

May 28, 2010 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

Temp stays at pre-bake 170 degrees oven does not ignite


We are Amana factory authorized service and parts supplies. We have all the parts that you need for you oven.

You may contact us at:

http://www.fixya.com/repair/d499389-accurate_appliance_repair_service and we will give you all the information as well as get the correct part out to you asap.

We look forward to getting you up and cooking again.
Thanks, Ella

Nov 10, 2009 | Amana AOGD2750 Gas Double Oven

1 Answer

Whirlpool oven timed bake feature dosn't work.


F1-E1 - EEPROM Checksum Error - Disconnect power for at least 30 seconds and then reconnect.
Allow at least a minute after power has been restored and if error code reappears, replace control board (clock).


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
@@@@

Oct 25, 2009 | Whirlpool RBS275PD Electric Single Oven

1 Answer

F1 error message on kenmore gas range


The F1 usually means a problem with the touchpanel. It is also related to the F7 problem. I have developed a fix which may solve you problem. Please go to the following link for my fix.
http://www.fixya.com/howto/h155060-dreaded_f7_error
I have shared my fix with over two thousand unhappy GE customers. Most report success. Please let me know if this works for you too. I am making a statistical study of this problem.
Regards,
Powerman
hutchipop@yahoo.com

Dec 05, 2008 | Kenmore Ovens

1 Answer

F1 Error Code


Hi,
According to the GE website, F1 usually means a problem with the keypad. You might try my solution for the F7 problem which is similar in nature. Go to the following link:

http://www.fixya.com/howto/h155060-dreaded_f7_error

I have shared my solution with more than 1900 folks and most report success.

Please let me know if it works for you at:

hutchipop@yahoo.com

Good Luck,

Powerman

Jul 16, 2008 | Ovens

1 Answer

Error code F1 and beeping


Means replace the $300 control board. And if your like me.....do it twice within 12 months.

Jan 30, 2008 | Jenn-Air JJW8530C Expressions Collection...

1 Answer

Kenmore Error F1


Hi,
The F1 usually means a problem with the keypad, not a sensor. You might want to try my fix for a similar problem with an F7 error message.
You can find my fix on this web site at:

http://www.fixya.com/howto/h155060-dreaded_f7_error

I have shared my fix with over 1500 folks and most report success. I hope that it works for you too. Please let me know at:

hutchipop@yahoo.com

Also, what is your model number, how old is your oven and where are you located? I am making a statistical study of this problem.

Regards,
Powerman

Dec 26, 2007 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

Aogd2750e gas double oven


Hello,
F1=Electronic range control failure

It is telling you may have a faulty control...need to replace control or EOC

Thanks

Dec 07, 2007 | Amana AOGD2750 Gas Double Oven

1 Answer

Dacor cps130 wall oven f1 error


According to the manual, this is an element relay circuit failure. Call the tech.

Dec 04, 2007 | Ovens

Not finding what you are looking for?
GE JKS05 Electric Single Oven Logo

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Ovens Experts

William Miller
William Miller

Level 3 Expert

9098 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a GE Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...