The wiring of the iso harness to the parrot - Parrot Cell Phones

yes you can , depending on what kind of stereo system is in the car, you will need an iso adapter lead that allows your parrot to be connected in between your car audio and power connectors and the car stereo,Similar to this


You need a SOT ISO lead you can check for an installation guide here

http://www.parrot.com/uk/support/installationdiagrams

First, you will have to know if the vehicle has a facra or an iso norme build in it.

If it is a Facra, the wires to wires install is still possible but complicated and will necesarly need to get the diagram. Especially if the vehicle has an amplified system build in it. Or maybe optic fiber somewhere in the vehicle.

The vehicle has maybe an mute included into the autoradio, then the hot question you have is about the existing cable harness existing.

In that case I will advising you to get in touch with the manufacturer of the kit to get informed.

In fact, you will have to precise the phone used, the version of the car kit (you have it on the phone when you pair it.

And the vehicle you have and the type of install, with harness, wires to wires and directly with iso stick.

What type fo car do you have beacuse if you car does not have iso connectors you will need an SOT adaptor, this will allow the audio to come through the car speakers.

make sure your ground on the parrot and radio are in the same position on the iso block, sometimes you have to move them to different position

it depends what audio system you have. if you have the sat nav system then the radio is in the boot and you will need a special 10 speaker harness. you best bet is to find your nearest Parrot accredited installer to do the job. Try Parrot .com

You need to add a ignition wire, the vito uses the can bus to turn the radio on. The glove box light is on an ignition. also you may need to change over the perm live and the ignition wire on the parrot iso loom. you can do this at the fuses.

here,

When I did this truck I had to go to the amp under the center console. Good luck

#510564: 2007 GMC SIERRA C1500 2DR TRUCK
Audio/Mobile Video
WIRE COLOR POLARITY LOCATION
Battery ORANGE (+) RADIO HARNESS
Accesory (CLASS 2 DATA) (+) RADIO HARNESS
THE RADIO HARNESS DOES NOT PROVIDE A SWITCHED POWER SOURCE. RUN A WIRE TO THE FUSEBOX FOR SWITCHED POWER. THE ACCESSORY TURN-ON AND AMPLIFIER TURN-ON ARE CONTROLLED BY THE CLASS 2 SERIAL NETWORK.
Ground BLACK/WHITE (-) RADIO HARNESS
Illumination GRAY (+) RADIO HARNESS
Dimmer BROWN (+) RADIO HARNESS
Amp Turn On PINK (+) RADIO HARNESS
LF Speaker (+) TAN
LF Speaker (-) GRAY
RF Speaker (+) LIGHT GREEN
RF Speaker (-) DARK GREEN
LR Speaker (+) BROWN
LR Speaker (-) YELLOW
RR Speaker (+) DARK BLUE
RR Speaker (-) LIGHT BLUE
Amp Location UNDER CENTER CONSOLE
Steering Cntrls OPTIONAL
THIS VEHICLE MAY BE EQUIPPED WITH OPTIONAL ONSTAR® TELEMATICS EQUIPMENT. USE AN APPROPRIATE INTEGRATION HARNESS OR INSTALLATION PROCEDURE TO ENSURE PROPER FUNCTION OF THIS EQUIPMENT.
Speed Cntrl OPTIONAL
Radio Security YES

try switching the red and orange wires. one is constant and one is switched. you can try by just reversing them at the inline fuses. hope this helps.