Question about Honda Water Pump Honda Engine

1 Answer

Where can i get pump seals for honda 5hp cold pressure washer , i have no other details on this washer

Posted by on

  • speed_line Aug 16, 2009

    hi mate thanks, in fact after research, the pump is a comet unit, taking it off, it showed 3 rods which i believe are ceramic coated, i filled the the breaks with metal filler and polished them and replaced all the seals which were on special order, and bingo ! one perfect working unit at a cost of $50. Thanks for your help.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 583 Answers

Doubt very much if the unit is produced by honda themselves ,but rather sone else has produced it ,and used a honda motor.i have made several myself.it could be agood quality italian pump, best way would be to go to several pressure pump suppliers and have a look at the differentpumps on the different machines untill you see one the same as yours..alternatively take the whole unit to a reputable company and i`m sure they will be able to tell you in aflash------------youdoit

Posted on Aug 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The pump is leaking some gray fluid


Gray fluid is usually indicative of old oil with water mixed into it. First you have to determine if the fluid is coming out of the motor or pressure pump. Then change the oil in that, or both, and then watch the condition of the oil when you use the washer. With new oil, it won't turn gray but will get a milky coloration to it. There shouldn't be any way for water to get into the motor oil short of the engine being sprayed directly with high pressure water. If water is getting into the pump oil you'll have to check the seals inside the pump.

Feb 14, 2013 | Honda 5hp 5 Hp Engine Motor Xr2500 Xr 2600...

1 Answer

I have low water pressure on my 5hp honda pressure washer


the seal dry up inside if not stored properly

Mar 22, 2012 | Garden

1 Answer

Honda 5HP pressure washer. When you press handle to get pressured water, motor does not rev up to give you high pressure.


Most small pressure washers do not have an automatic throttle control to increase engine speed on demand (activated by trigger on wand). You must set the governor/throttle to about max. to get the rated pressure. A honda motor produces 5 hp when it is turning about 3600 rpm. To increase the life of the pump, use about 80 % of capacity of the pump and increase only for stubborn debris.

Jun 17, 2011 | Honda Garden

1 Answer

I have a honda 5hp pressure washer.I cleaned the carb and now when starts the gas fills the block!


The float needle is not closing all the way and fuel keeps leaking in to the carburetor. Replace the needle and make sure the float is not damaged and that the float pin is clean.

Mar 22, 2011 | Psi 2500 Mobile Pressure Washer 5hp Honda...

1 Answer

Oil is coming out of the lance end when in use . it doesn't come out all the time every 30 seconds or so . it comes out whether on hot or cold . karcher hds550c


sounds like the seals & o'rings are faulty.get the model number of pump and purchase a kit for the pump.replace all seals and o' rings.this will stop the oil from the pump going through the nozzle.

Jan 17, 2011 | Honda Karcher G2400HH-R Pressure Washer

2 Answers

I have an Excell model XR2600 pressure washer that will not start. I have had it stored for 3 years. I drained the gas tank and carb and put in fresh gas. Is there a fuel shutoff on this model ? It has a...


If it's been sitting for 3 years most likely the carb is gummed up. If it's getting spark, you could try a small shot of starting fluid into the carb. If it runs on this you know it's a fuel problem. Best bet would get all the MOTOR data, and buy a carb kit from you local lawn and garden equipment parts supplier. . Remove carburator and clean and install kit. Use sta-bil when you put it away next time, but even that only works about a year or so.

Jul 05, 2010 | Karcher 2500 PSI Pressure Washer

1 Answer

I have a Generac pressure washer, model #01450-0, with a Honda 5hp motor. The motor runs fine, but the pressure hose pulsates as if the pump is intermittently making pressure, and the pressure out of the...


Take a small diameter wire and poke thru the discharge hole of the spray head to clean out.
Second time in 6 months that I had the same problem. The problem is alway in the spray head.

Jul 23, 2009 | Garden

1 Answer

No high preasure at nozzle


Try starting the washer up without a nozzle clicked in and purging water through the pump, shut it down and install the nozzle and restart, if the motor lugs then it is making pressure, if the pump squirts water out of the by-pass immediately and or constantly it may be a stuck bypass and not a bad pump.

May 26, 2009 | Psi 2500 Mobile Pressure Washer 5hp Honda...

1 Answer

Honda 5hp engine wont run


check oil level. it has a low level shut off switch ?? May be it

May 04, 2009 | Karcher 2500 PSI Pressure Washer

Not finding what you are looking for?
Honda Water Pump Honda Engine Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Tools & Hardware - Others Experts

John Loiselle

Level 1 Expert

31 Answers

Bill Boyd

Level 3 Expert

44435 Answers

joseph m fucci
joseph m fucci

Level 1 Expert

43 Answers

Are you a Honda Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...