Question about Audio Players & Recorders

1 Answer

It powers on and turns the disc briefly the flashes an "e" on the screen the "99". and stops. what does that mean?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 2,200 Answers


This is an error code which indicates a problem with the disk magazine or drive on the player.

E-99: Changer malfunction - disc may be caught in machine or changer requires service.

This error sometimes can be reset by removing the power from the mains supply for 10 minutes and then power the unit up again.

Another reset which may work is with the unit connected to mains supply but powered off - hold the power button in for 10 seconds after the unit powers on. You may hear a reset occur in the drive mechanism.

If these resets fail the unit will require service attention as it will be caused by a mechanical fault in the mechanism itself.

Hope this helps. Please do rate my answer. Many Thanks.

Posted on Jul 31, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I got a radio from the wreckers, got the code but when I turn the key on, the screen stays blank and the red light next to the word disk is flashing, what does this mean and can I fix it?

pop a disc in see what you get
screen should power up

wonder if the wiring is incorrect
should have a power constant and a power ign ,earth
speakers pos & neg ... arial if fitted

who is the maker of the radio

Oct 18, 2016 | Cars & Trucks

1 Answer

My bauhn TV screen stopped working. DVD plays sound but no picture. Can the TV be reset or rebooted

You can try unplugging the units--no picture often means the DVD has a dirty or failed optical unit.

Aug 30, 2012 | Televison & Video

1 Answer

I have a 42 inch t.v. that I mounted on the wall, after 6 months the picture started flashing/blinking. When I removed the t.v. from the wall it stop briefly. I have to turn the t.v. off and on numerous...

Tv is new only 6 months old?Yes take ur warranty repair service.The tv have 2 long LCD inverter boards problems,to causes the LCD screen panel to flashing/blinking or it is the causing by a bad power supply board,that the board where the a/c power cord plug into it.

Apr 21, 2011 | Digital Lifestyle FA1B32Z 32 in. LCD...

1 Answer

How do you reset the camera?

Remove battery & USB. Wait 30 Seconds. Hold down power button while connecting USB power. Screen should briefly flash. DIsconnct USB, put in battery, turn on. Worked for me.

Nov 17, 2010 | Aiptek A-HD 720P Flash Media Camcorder

2 Answers

Won't stay on. When the power is turned on, an

Make sure you video cable from the computer is seated in correctly.

Dec 29, 2009 | Planar PE191M 19" Flat Panel LCD Monitor

1 Answer

I turn it on the green light comes on briefly then

Sounds like it broke due to heat. You can call Sony

Dec 22, 2009 | Sony Playstation 3 (PS3) Console

2 Answers

RCA Opal M4202 won't turn on

go on to and download the firmware

Mar 19, 2009 | RCA M4204 MP3 Player

1 Answer

When you turn the tv on the red light on the front(stand by/timer)flashes and the tv starts to come on and then it turns off.

Do you mean the screen turns on briefly or the stand by light just keeps blinking. If the tv turns off after switching on then it probably means a protection circuit fault. Also please provide me the number of times it blinks before it pauses. Awaiting your resposnse.


Aug 19, 2008 | Sony Televison & Video

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts


Level 3 Expert

102366 Answers


Level 3 Expert

5158 Answers

The Knight
The Knight

Level 3 Expert

74383 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides