Question about Sharp 64LHP4000 64" Rear Projection Television

1 Answer

I have 64' rear projection tv the picture is showing double images. how do i adjust the horizontal focus

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

That's a convergence issue. It's an electronic failure in the convergence circuit. Most likely cause is defective convergence output ic's. Depending on make and model, they are usually stk's and need to be replaced by a qualified service technician as those ic's can cause other components to faill also (i.e. resistors). There may also be numerous alignments reaquired after those ic's are replaced...

Posted on Jul 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The brightness is very dark. Any nightime scene


Your CRT's getting old. Plus dust on lenses don't help much. You have to open front frill (below screen) and back of the TV. Clean up lenses using dry paper towels, do not wet.
In front of the TV after grill remove center cover and locate "black box" that have 6 potentiometers on it that looks like plastic adjustment screws for philips #2 screwdriver slots. 3 of them should read "Focus" These you don't touch. Another 3 reads "Screen". Put some still image on your screen (like paused DVD movie frame). Carefully add brightness in all 3 colors trying to avoid horizontal lines appearance. If lines show up, just turn it back a little. Try to keep color balance looking at the picture.
This procedure will brighten up image but further reduce CRT's life.

In case that you posted wrong model here and you have DLP Projection TV - just replace the lamp.

Mar 09, 2010 | Pioneer SD-643HD5 64" Rear Projection...

2 Answers

My tv is almost 6yrs old and all of a sudden the picture is blury almost showing double images. The color is also of at the top and bottom of the screen.


this is typic old projection tv, some tecnical ajust parameters have reset, so if you can adjust,this settings on service menu on tv, or ask for help on local repair store, to calibrate scren.

Nov 29, 2009 | Televison & Video

1 Answer

Sony kp57hw40 tv blurry image,


Yes, you have a bad convergence Ic--set uses two of them---have someone change both and adjust the set in the Tech menu--if you need more information or help email me etower.766@netzero.net---

Aug 09, 2009 | Sony KP-51WS500 51" Rear Projection...

1 Answer

Double screen image


Double image shows that TV got problem of Convergence Out ICs failure and will be replaced two ICs mounted at D Board of TV.

ICs, STK392-360 are available in Part Store, click to see an image and price info.

Apr 27, 2009 | Sony KP-65WS500 65" Rear Projection...

1 Answer

Double images


you will need to have the tv re converged to make the picture right call a repairman

Feb 16, 2009 | Samsung HCM4215W 42" Rear Projection...

2 Answers

PT4298HD Double image


BINGO thats exactly what i get paid to do same price 285.00

Nov 30, 2008 | Akai PT4298HD Rear Projection Television

1 Answer

Sony KP-46WT500 picture is distorted


you either need to reconverge the unit (auto focus) or you need to replace the converge chips-stk-xxx-xxx don't adjust anything.

Nov 05, 2008 | Sony KP-46WT500 46" Rear Projection...

1 Answer

Blurry Image


Congrats on changing the fly and getting it to come on. If it is a sony as it looks at the top of this page (accurate model?) need only to adjust focus and/or the horizontal static control. can't tell you where the horizontal static control is exactly but there are large wire associated. If not a sony then adjust the focus on the flyback.....top control bottom control is screen or for brighter picture.

Mar 16, 2008 | Sony KP-46WT510 46" Rear Projection HDTV

Not finding what you are looking for?
Sharp 64LHP4000 64" Rear Projection Television Logo

Related Topics:

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...