Need to find a repair place to fix Model S1868; just stopped working. Has remote with it.

Check the remote control for its infrared emission. Check it with fresh batteries. Clean the battery contacts inside its battery compartment. If these do not help you, you remote control need cleaning. If you wish to know more about how to clean and repair a remote control check this site. Pull up older posts. One among it has details.

It will be best to buy one universal remote control to setup with the TV, rather than trying to repair the present remote control. Setup code list to remote control will be there along with the packing. If you wish to get setup codes, three digits, four digits or five digit ones, check this link. Pull up older posts. Setup code list and setup instructions to some popular model remote controls are given. Check them and determine which remote control should be selected for your TV.

I had the same issue yesterday with my remotes which are model 850CB. I fixed it by following these steps on Chamberlain's help site:
1. Press & release the "learn" button on the motor unit. 2. Within 30 seconds, press and hold the button on the remote. 3. Release the remote button when the light bulb on the motor blinks. It has learned the code.

http://help.chamberlain.com/help/en-us/programmingInstructions/ and enter your remote model number for re-programming instructions.

That worked for me. Not sure why it "lost" the code in the first place. By the way, I only had to do this for one remote, the other started working after the first was re-learned.

Kodak manufactured an "Ektagraphic" model (without a suffix) from 1969 to 1971. Remote focus (given the age of the projector, I wouldn't bother repairing it) is more trouble (and $$) than it's worth. The forward / reverse problem is pretty straightforward: the "link" between the cycle solenoid and the slide change mechanism is probably broken. It is plastic and gets brittle & cracks with age. It will require an authorized warranty repair dealer to fix it.... who knows, maybe they will throw in the remote focus for free !! :)

sounds like fob circuitry is getting a bad connection... or it's dying... pull fob apart and gently clean the button electrical contacts

It's most likely the receiver for the remote (transmitter) -- it's located under the cover at the top of the fan -- will need replacing.

Here's two places for your new remote:
http://www.remotes.com/store/element/flx3210.html

http://www.newremotecontrol.com/Mfrs/OtherBrands/Def/dyn_part_data.php?catnum=CC-FLX-32-021

Can you give me more details as to the problem? You could also try a small mom and pop appliance repair store. They may be able to work on it as well if it is truly an electrial issue.

well probally not dust sounds like a bad reciver i just fixed one about a month ago

The following link has one of the keyboard pc boards for that model used in for 25.00 its listed under the Phillips magnavox parts.
http://servicemanuals.vstore.ca/