My Kelvinator KD12ww1 dishwasher switch to intensive mode and is not working Dishwasher switches over to intensive mode and is not working. It only makes a beep noice and the on of switch and function dial knob are not working.. Water is also leaking on the side of machine

Question edited for clarity.

No model number provided. Some generic help here.

https://www.google.com/search?q=kelvinator+dishwasher+machine+replace+temperature+sensor

..

If the drain pump is running but not draining the unit, the hose may be clogged. If it drains for rinsing but not after the wash cycle, the problem would seem to be the control board. Probably just replace.

Different model manual below:

https://www.manualslib.com/manual/879400/Kelvinator-Kd12ww1.html?page=22

For a different model Kelvinator dishwasher at the link above, it states that water pressure is low.

Check that the water supply is connected properly, and the water is turned on.

Is there any fuses on a kelvinator dishwasher kd12ww1

I don't know it will work for you, but I went to the breaker an switched it off in my panel. Make sure you switch off the line your machine is on. Wait 30 seconds an switch it back on. Repair man told me to try it, because sometimes voltage spikes cause electronics to go weird.

Hello Dorothy Grieve,

My favorite site (appliancepartspros) is NOT showing
your model number...

Here (usa) the dispenser is about $50 to $60 to purchase.

I am thinking if you search for SPARES... with your
model number... you might have better success.

KD12WW1... rinse aid (not found)...
Kelvinator KD12WW1 91123003500 Dishwasher Rinse Aids

Lots of fun...
but the site needs some work to show all the "SPARES"

Use their number (Call Now 0844 49991110)...

Carnac the Magnificent

It's possible, but check to make sure a knife or fork or something is not sticking down below the lower rack and stopping the arm from turning. Turn the lower wash arm with your hand to make sure nothing is caught in there. A stuck float would probably not let the unit fill or drain properly.

i chucked in some baking soda and vinegar and let it do its thing for 15 min. then i started a cycle and voula, it worked.

when turn on the light automatically switches to intense and there is a constant sound of himself
kelvinator kd12ww1 dishwasher